Successfully Unlocked/Repaired phones w/Octopus Suite - GSM-Forum

Y2ksalman · 10-19-2011, 13:16

here is the log

--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: E15i
Connecting to server...OK
Username: Y2ksalman
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 10 credits.
To unlock E15i you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 42583930324841545237
Device status: ACTIVE
Reading info...
Detected model name: E15i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 42583930324841545237
Device status: ACTIVE
Reading info...
Detected model name: E15i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\E15i_19-10-2011_17-10-44.BKP"
Checking TA...OK
IMEI: 358452-04-057930-3
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!

josebraga · 10-21-2011, 13:38

Welcome to Octopus Box SE Software version 1.0.0
-----------------------------------------------------------------------------
---
Connecting to server...OK
Username: josebragasales
Authorizing...OK
Checking balance...OK
Your balance: 30 credits.
--------------------------------------------------------------------------

Platform: SE Qualcomm
Selected model: U20a
Octopus smart card is not present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select
menu "Settings"->"Applications"->"Development"->"Enable
USB debugging" and connect USB cable...OK
Device serial number: 425939303038504B4655
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.0.A.0.504
Kernel version: 2.6.29
-----------------------------------------------------------------------------
---
Platform: SE Qualcomm
Selected model: U20a
Connecting to server...OK
Username: josebragasales
Authorizing...OK
Octopus smart card is not present.
Checking balance...OK
Your balance: 30 credits.
To unlock U20a you need to have 13 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select
menu "Settings"->"Applications"->"Development"->"Enable
USB debugging" and connect USB cable...OK
Device serial number: 425939303038504B4655
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.0.A.0.504
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer
\Octopus_SE\BACKUP\U20a_21-10-2011_09-32-48.BKP"
Checking TA...OK
IMEI: 012343-00-******-*
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!

ady1975 · 10-21-2011, 15:15

Platform: SE Qualcomm
Selected model: U20i
Connecting to server...OK
Username: crisdavmobilworld_01
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 10 credits.
To unlock U20i you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 43423531314C304B4A39
Device status: ACTIVE
Reading info...
Detected model name: U20i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 43423531314C304B4A39
Device status: ACTIVE
Reading info...
Detected model name: U20i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20i_21-10-2011_17-10-12.BKP"
Checking TA...OK
IMEI: 012342-00-182811-2
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!

MartechSolution · 10-24-2011, 04:29

E15i/x8 Unlock by se edition octopus great work..

SET FIRST

Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...

tnx octopus team...

Thorenzz · 10-26-2011, 16:28

LT15i - Xperia Arc (IMEI REPAIR)

Here is LOG:
Welcome to Octopus Box SE Software version 1.0.2
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: LT15i
Operation: Repair IMEI
Connecting to server...OK
Username: thorenzz66_01
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 10 credits.
To Repair IMEI for LT15i you need to have 10 credits.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: LT15i
Please, disconnect battery, attach testpoint and connect USB cable...OK
Now You can disconnect testpoint.
Sending preloader...OK
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 012682-00-386339-7
Checking security...OK
Reading security area...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\LT15i_
00000000000000_26-10-2011_16-22-33.BKP"
Checking TA...OK
Old IMEI: 000000-00-000000-0
New IMEI: 012682-00-xxxxxx-x
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Checking security area...
Writing security area...OK
Shutting down...OK
IMEI sucesfully repaired!

cool_male01 · 10-27-2011, 10:25

SO-02C UNLOCKED DONE

İboc@N · 10-27-2011, 13:32

look like a joke

very easy just press one button thx to team

Welcome to Octopus Box SE Software version 1.0.2
--------------------------------------------------------------------------------
Connecting to server...OK
Username: halilibrahimkundak_01
Authorizing...OK
Checking balance...OK
Your balance: 50 credits.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Octopus smart card is present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: XXXXXX
Device status: ACTIVE
Reading info...
Detected model name: X10i
Firmware version: 2.0.A.0.504
Kernel version: 2.6.29
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Operation: Repair IMEI
Connecting to server...OK
Username: XXXXXXXX
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 50 credits.
To Repair IMEI for X10i you need to have 10 credits.
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: XXXXXXX
Device status: ACTIVE
Kernel version: 2.6.29
Firmware version: 2.0.A.0.504
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading SBL...OK
SBL type: Original, version: R8A013
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\X10i_27-
10-2011_15-23-34.BKP"
Checking TA...OK
Old IMEI: 35XXXX-03-XXXXXX-9
New IMEI: 35XXXX-01-XXXXXX-5
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
IMEI sucesfully repaired!

Network OK .. Simcard OK! everything perfect

br.
iboc@n

***Braycel*** · 10-27-2011, 17:43

Welcome to Octopus Box SE Software version 1.0.2
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: E10a
Operation: Repair IMEI
Connecting to server...OK
Username: master-unlock
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 90 credits.
To Repair IMEI for E10a you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: 43423531314A41474754
Device status: ACTIVE
Reading info...
Detected model name: E10a
Firmware version: 2.0.2.A.0.24
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Already patched.
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\E10a_27-
10-2011_11-38-38.BKP"
Checking TA...OK
Old IMEI: 012313-00-004527-1
New IMEI: xxxx20-14-995467-1
SBL is already patched!
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
IMEI sucesfully repaired!

***Braycel*** · 10-27-2011, 18:10

-------------------------------------------------------
Platform: SE Qualcomm
Selected model: U20a
Operation: Repair IMEI
Connecting to server...OK
Username: master-unlock
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 80 credits.
To Repair IMEI for U20a you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: 43423531314D58355537
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: 43423531314D58355537
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20a_27-
10-2011_12-04-48.BKP"
Checking TA...OK
Old IMEI: 012343-00-065964-9
New IMEI: xx0008-76-567543-1
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
IMEI sucesfully repaired!

celudiego · 10-28-2011, 22:47

Quote:

Originally Posted by Braycel

-------------------------------------------------------
Platform: SE Qualcomm
Selected model: U20a
Operation: Repair IMEI
Connecting to server...OK
Username: master-unlock
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 80 credits.
To Repair IMEI for U20a you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: 43423531314D58355537
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and
connect USB cable...OK
Device serial number: 43423531314D58355537
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20a_27-
10-2011_12-04-48.BKP"
Checking TA...OK
Old IMEI: 012343-00-065964-9
New IMEI: xx0008-76-567543-1
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
IMEI sucesfully repaired!

no need tp for repair imei

İboc@N · 10-31-2011, 14:00

succesfully unlocked E15i with new versiyon 1.0.3

Dr_Wolodya · 11-04-2011, 19:12

Succesfully unlocked Sony-Ericsson E15i:

Code:

To unlock E15i you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 43423531315044304E57
Device status: ACTIVE
Reading info...
Detected model name: E15i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK
Device serial number: 43423531315044304E57
Device status: ACTIVE
Reading info...
Detected model name: E15i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\E15i_04-11-2011_20-03-23.BKP"
Checking TA...OK
IMEI: 012448-00-445311-1
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!

raulka2003 · 11-10-2011, 13:34

Welcome to Octopus Box SE Software version 1.0.6
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: LT15i
Operation: Repair IMEI
Connecting to server...OK
Username: raulka2003_02
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 10 credits.
To Repair IMEI for LT15i you need to have 10 credits.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: LT15i
Please, disconnect battery, attach testpoint and connect USB cable...OK
Now You can disconnect testpoint.
Sending preloader...OK
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 012687-00-095103-8
Checking security...OK
Reading security area...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\LT15i_
01268700095103_10-11-2011_18-04-13.BKP"
Checking TA...OK
Old IMEI: 012687-00-095103-8
New IMEI: 012637-00-095103-3
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Checking security area...
Writing security area...OK
Shutting down...OK
IMEI sucesfully repaired!

moblastboy · 11-17-2011, 16:33

Welcome to Octopus Box SE Software version 1.0.8
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: U20i
Octopus smart card is present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 4342353131**********
Device status: ACTIVE
Reading info...
Detected model name: U20i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: U20i
Connecting to server...OK
Username: mobilezonebg_01
Authorizing...OK
Octopus smart card is present.
Checking smart card...OK
Checking balance...OK
Your balance: 10 credits.
To unlock U20i you need to have 10 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 434235313************
Device status: ACTIVE
Reading info...
Detected model name: U20i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 434235313**********
Device status: ACTIVE
Reading info...
Detected model name: U20i
Firmware version: 2.1.1.A.0.6
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20i_17-11-
2011_17-28-59.BKP"
Checking TA...OK
IMEI: **************
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Checking bootloaders...
Check succesfully completed!
Checking TA...
Check succesfully completed!
Rebooting device...OK
Phone sucesfully unlocked!

celudiego · 11-18-2011, 15:56

Welcome to Octopus Box SE Software version 1.0.9
Platform: SE Qualcomm
Selected model: U20a
Octopus smart card and DreamBox are not present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 434235313xxxxxxxxx
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.0.2.A.0.24
Kernel version: 2.6.29
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: U20a
Operation: Repair IMEI
Connecting to server...OK
Username: mistermaste
Authorizing...OK
Octopus smart card and DreamBox are not present.
Checking balance...OK
Your balance: 50 credits.
To Repair IMEI for U20a you need to have 13 credits.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 4342353131xxxxxxx
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.0.2.A.0.24
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...
Could not read SBL. Maybe, NAND MPU is enabled.
Disabling NAND MPU...OK
Reconnecting device. Please wait...OK
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: 43423531xxxxxx
Device status: ACTIVE
Reading info...
Detected model name: U20a
Firmware version: 2.0.2.A.0.24
Kernel version: 2.6.29
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Reading Partition table...OK
Reading SBL...OK
SBL type: Original, version: R8A029
Reading TA...OK
Backup saved to "C:\Archivos de programa\GsmServer\Octopus_SE\BACKUP
\U20a_18-11-2011_09-53-59.BKP"
Checking TA...OK
Old IMEI: 012343-00-533078-2
New IMEI: 011930-00-xxxxxxxx
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Checking bootloaders...
Check succesfully completed!
Checking TA...
Check succesfully completed!
Rebooting device...OK
IMEI sucesfully repaired!

10-19-2011, 13:16	#1 (permalink)
Y2ksalman No Life Poster Join Date: Oct 2005 Location: SALMAN SOFTWARE SADDAR RWP Posts: 2,389 Member: 194511 Status: Offline Sonork: 03335548581 Thanks Meter: 1,607	Successfully Unlocked/Repaired phones w/Octopus Suite here is the log -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: E15i Connecting to server...OK Username: Y2ksalman Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 10 credits. To unlock E15i you need to have 10 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 42583930324841545237 Device status: ACTIVE Reading info... Detected model name: E15i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading Partition table... Could not read SBL. Maybe, NAND MPU is enabled. Disabling NAND MPU...OK Reconnecting device. Please wait...OK Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 42583930324841545237 Device status: ACTIVE Reading info... Detected model name: E15i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\E15i_19-10-2011_17-10-44.BKP" Checking TA...OK IMEI: 358452-04-057930-3 Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK Phone sucesfully unlocked! Last edited by Octopus box; 04-11-2012 at 09:34.

10-21-2011, 13:38	#2 (permalink)
josebraga Freak Poster Join Date: Aug 2008 Location: Fortaleza-Ce Posts: 353 Member: 850071 Status: Offline Thanks Meter: 114	Unlock u20a Welcome to Octopus Box SE Software version 1.0.0 ----------------------------------------------------------------------------- --- Connecting to server...OK Username: josebragasales Authorizing...OK Checking balance...OK Your balance: 30 credits. -------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: U20a Octopus smart card is not present. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 425939303038504B4655 Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.0.A.0.504 Kernel version: 2.6.29 ----------------------------------------------------------------------------- --- Platform: SE Qualcomm Selected model: U20a Connecting to server...OK Username: josebragasales Authorizing...OK Octopus smart card is not present. Checking balance...OK Your balance: 30 credits. To unlock U20a you need to have 13 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 425939303038504B4655 Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.0.A.0.504 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original, version: R8A029 Reading TA...OK Backup saved to "C:\Program Files\GsmServer \Octopus_SE\BACKUP\U20a_21-10-2011_09-32-48.BKP" Checking TA...OK IMEI: 012343-00-*****- Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK Phone sucesfully unlocked!

10-21-2011, 15:15	#3 (permalink)
ady1975 Freak Poster Join Date: May 2005 Location: Romania Age: 42 Posts: 168 Member: 143635 Status: Offline Thanks Meter: 32	u 20i unlock in no time :) Platform: SE Qualcomm Selected model: U20i Connecting to server...OK Username: crisdavmobilworld_01 Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 10 credits. To unlock U20i you need to have 10 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531314C304B4A39 Device status: ACTIVE Reading info... Detected model name: U20i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading Partition table... Could not read SBL. Maybe, NAND MPU is enabled. Disabling NAND MPU...OK Reconnecting device. Please wait...OK Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531314C304B4A39 Device status: ACTIVE Reading info... Detected model name: U20i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original, version: R8A029 Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20i_21-10-2011_17-10-12.BKP" Checking TA...OK IMEI: 012342-00-182811-2 Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK Phone sucesfully unlocked!

10-24-2011, 04:29	#4 (permalink)
MartechSolution Freak Poster Join Date: Sep 2006 Location: Trust unlocking Posts: 406 Member: 348518 Status: Offline Sonork: 100.1666935 Thanks Meter: 107	E15i/x8 Unlock by se edition octopus great work... E15i/x8 Unlock by se edition octopus great work.. SET FIRST Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable... tnx octopus team...

10-26-2011, 16:28	#5 (permalink)
Thorenzz Freak Poster Join Date: Dec 2009 Location: UK. Worcester Age: 35 Posts: 431 Member: 1176876 Status: Offline Sonork: 100.1607051 Thanks Meter: 154	LT15i IMEI REPAIR LT15i - Xperia Arc (IMEI REPAIR) Here is LOG: Welcome to Octopus Box SE Software version 1.0.2 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: LT15i Operation: Repair IMEI Connecting to server...OK Username: thorenzz66_01 Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 10 credits. To Repair IMEI for LT15i you need to have 10 credits. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: LT15i Please, disconnect battery, attach testpoint and connect USB cable...OK Now You can disconnect testpoint. Sending preloader...OK Waiting for preloader...OK Reading info... Sending loader...OK Reading info...OK IMEI: 012682-00-386339-7 Checking security...OK Reading security area...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\LT15i_ 00000000000000_26-10-2011_16-22-33.BKP" Checking TA...OK Old IMEI: 000000-00-000000-0 New IMEI: 012682-00-xxxxxx-x Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Checking security area... Writing security area...OK Shutting down...OK IMEI sucesfully repaired!

10-27-2011, 10:25	#6 (permalink)
cool_male01 No Life Poster Join Date: May 2007 Location: cebu city Posts: 634 Member: 508157 Status: Offline Sonork: 0100.1627392 Thanks Meter: 54	SO-02C UNLOCKED DONE

10-27-2011, 13:32	#7 (permalink)
İboc@N Freak Poster Join Date: Apr 2004 Location: Antalya/Türkiye Age: 43 Posts: 267 Member: 64224 Status: Offline Thanks Meter: 24	look like a joke very easy just press one button thx to team Welcome to Octopus Box SE Software version 1.0.2 -------------------------------------------------------------------------------- Connecting to server...OK Username: halilibrahimkundak_01 Authorizing...OK Checking balance...OK Your balance: 50 credits. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: X10i Octopus smart card is present. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: XXXXXX Device status: ACTIVE Reading info... Detected model name: X10i Firmware version: 2.0.A.0.504 Kernel version: 2.6.29 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: X10i Operation: Repair IMEI Connecting to server...OK Username: XXXXXXXX Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 50 credits. To Repair IMEI for X10i you need to have 10 credits. Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: XXXXXXX Device status: ACTIVE Kernel version: 2.6.29 Firmware version: 2.0.A.0.504 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading SBL...OK SBL type: Original, version: R8A013 Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\X10i_27- 10-2011_15-23-34.BKP" Checking TA...OK Old IMEI: 35XXXX-03-XXXXXX-9 New IMEI: 35XXXX-01-XXXXXX-5 Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK IMEI sucesfully repaired! Network OK .. Simcard OK! everything perfect br. iboc@n

10-27-2011, 17:43	#8 (permalink)
*Braycel* Super Moderator Join Date: Jul 2008 Location: Villa del rosario/Nsd Colombia Posts: 3,605 Member: 813309 Status: Offline Thanks Meter: 1,912	Full Work Excelent Update Welcome to Octopus Box SE Software version 1.0.2 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: E10a Operation: Repair IMEI Connecting to server...OK Username: master-unlock Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 90 credits. To Repair IMEI for E10a you need to have 10 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531314A41474754 Device status: ACTIVE Reading info... Detected model name: E10a Firmware version: 2.0.2.A.0.24 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading Partition table...OK Reading SBL...OK SBL type: Already patched. Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\E10a_27- 10-2011_11-38-38.BKP" Checking TA...OK Old IMEI: 012313-00-004527-1 New IMEI: xxxx20-14-995467-1 SBL is already patched! Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK IMEI sucesfully repaired!

10-27-2011, 18:10	#9 (permalink)
*Braycel* Super Moderator Join Date: Jul 2008 Location: Villa del rosario/Nsd Colombia Posts: 3,605 Member: 813309 Status: Offline Thanks Meter: 1,912	------------------------------------------------------- Platform: SE Qualcomm Selected model: U20a Operation: Repair IMEI Connecting to server...OK Username: master-unlock Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 80 credits. To Repair IMEI for U20a you need to have 10 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531314D58355537 Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading Partition table... Could not read SBL. Maybe, NAND MPU is enabled. Disabling NAND MPU...OK Reconnecting device. Please wait...OK Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531314D58355537 Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original, version: R8A029 Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20a_27- 10-2011_12-04-48.BKP" Checking TA...OK Old IMEI: 012343-00-065964-9 New IMEI: xx0008-76-567543-1 Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Rebooting device...OK IMEI sucesfully repaired!

11-10-2011, 13:34	#13 (permalink)
raulka2003 No Life Poster Join Date: Apr 2007 Location: Inside Samsung Pocket Age: 40 Posts: 1,538 Member: 489331 Status: Offline Thanks Meter: 1,141	LT15i repaire imei Done Welcome to Octopus Box SE Software version 1.0.6 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: LT15i Operation: Repair IMEI Connecting to server...OK Username: raulka2003_02 Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 10 credits. To Repair IMEI for LT15i you need to have 10 credits. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: LT15i Please, disconnect battery, attach testpoint and connect USB cable...OK Now You can disconnect testpoint. Sending preloader...OK Waiting for preloader...OK Reading info... Sending loader...OK Reading info...OK IMEI: 012687-00-095103-8 Checking security...OK Reading security area...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\LT15i_ 01268700095103_10-11-2011_18-04-13.BKP" Checking TA...OK Old IMEI: 012687-00-095103-8 New IMEI: 012637-00-095103-3 Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Checking security area... Writing security area...OK Shutting down...OK IMEI sucesfully repaired!

11-17-2011, 16:33	#14 (permalink)
moblastboy Insane Poster Join Date: Feb 2005 Location: Bulgaria Age: 54 Posts: 61 Member: 113146 Status: Offline Thanks Meter: 2	u20i succesfully unlock Welcome to Octopus Box SE Software version 1.0.8 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: U20i Octopus smart card is present. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 4342353131******** Device status: ACTIVE Reading info... Detected model name: U20i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: U20i Connecting to server...OK Username: mobilezonebg_01 Authorizing...OK Octopus smart card is present. Checking smart card...OK Checking balance...OK Your balance: 10 credits. To unlock U20i you need to have 10 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 434235313******** Device status: ACTIVE Reading info... Detected model name: U20i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Checking security...OK Reading Partition table... Could not read SBL. Maybe, NAND MPU is enabled. Disabling NAND MPU...OK Reconnecting device. Please wait...OK Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 434235313****** Device status: ACTIVE Reading info... Detected model name: U20i Firmware version: 2.1.1.A.0.6 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original, version: R8A029 Reading TA...OK Backup saved to "C:\Program Files\GsmServer\Octopus_SE\BACKUP\U20i_17-11- 2011_17-28-59.BKP" Checking TA...OK IMEI: ************ Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Checking bootloaders... Check succesfully completed! Checking TA... Check succesfully completed! Rebooting device...OK Phone sucesfully unlocked!

11-18-2011, 15:56	#15 (permalink)
celudiego Insane Poster Join Date: Mar 2007 Location: colombia Posts: 63 Member: 461187 Status: Offline Thanks Meter: 6	Welcome to Octopus Box SE Software version 1.0.9 Platform: SE Qualcomm Selected model: U20a Octopus smart card and DreamBox are not present. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 434235313xxxxxxxxx Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.0.2.A.0.24 Kernel version: 2.6.29 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: U20a Operation: Repair IMEI Connecting to server...OK Username: mistermaste Authorizing...OK Octopus smart card and DreamBox are not present. Checking balance...OK Your balance: 50 credits. To Repair IMEI for U20a you need to have 13 credits. Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 4342353131xxxxxxx Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.0.2.A.0.24 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table... Could not read SBL. Maybe, NAND MPU is enabled. Disabling NAND MPU...OK Reconnecting device. Please wait...OK Initializing Android Debug Bridge...OK Disconnect USB cable and power on the phone. Select menu "Settings"->"Applications"->"Development"->"Enable USB debugging" and connect USB cable...OK Device serial number: 43423531xxxxxx Device status: ACTIVE Reading info... Detected model name: U20a Firmware version: 2.0.2.A.0.24 Kernel version: 2.6.29 Kernel version is supported Checking root access... Device is not rooted. Sending exploit...OK Executing exploit...OK Reconnecting device. Please wait...OK Checking root access...OK Root access garanted! Initializing flash...OK Reading Partition table...OK Reading SBL...OK SBL type: Original, version: R8A029 Reading TA...OK Backup saved to "C:\Archivos de programa\GsmServer\Octopus_SE\BACKUP \U20a_18-11-2011_09-53-59.BKP" Checking TA...OK Old IMEI: 012343-00-533078-2 New IMEI: 011930-00-xxxxxxxx Replacing SBL...OK Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Writing security area...OK Finalizing...OK Checking bootloaders... Check succesfully completed! Checking TA... Check succesfully completed! Rebooting device...OK IMEI sucesfully repaired!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03