alcatel 9027w unlocked done but still locked
 

SigmaKey 2.29.20b1 MTK: Direct unlock (Alcatel 9027W)
Removing firmware protection...OK
Baseband Processor:MT6739, HW Rev. B.00, SW Rev. 0.02
Testing external RAM...DRAM, 2 Gb
Detecting flash...eMMC, Flash size: 14.57 Gb
Phone model: TCL 9027W
Android 8.1.0
Firmware: 9027W-user 8.1.0 O11019 vATY-0 release-keys
Hardware IMEI: 015263001619987
Security area saved to "C:\Users\JOHN\Documents\SigmaKey\security backup\0318736248\015263001619987_TCL 9027W (1).skb"
Unlocking phone.....Done

Please attach these files here:

any instructions for unlock?

@ juve2106,

Detailed manual on how to service Alcatel 9027W phone model available by this link.
In case any error appears, post here full log file from the unlock operation and upload security backups read from this phone.

Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

SigmaKey 2.29.20b1 MTK: Direct unlock
MediaTek USB VCOM (Android) (COM48), Provider: MediaTek Inc., Driver ver.: 3.0.1437.1, Date: 11/09/2014, USB\VID_0E8D&PID_2007&REV_FFFF
Baseband Processor: MT6739
Version: TK_MD_BASIC_HW
Firmware: MOLY.LR12A.R3.MP.V16.P3
IMEI 1: 015263001010625
IMEI 2: 000000000000000
Performing heuristic analysis (stage 128 of 128)...Not found

@ juve2106,

Direct Unlock for latest Alcatel MTK smartphones

Download special files:

• Download special MTK addon from boot-loader.com (Sigma free section) and put it into My Documents\SigmaKey\addons\<your Sigma card number> folder.

Settings:

• Select "MTK" platform from the tab menu in the upper left side of the software
• Go to "Unlock" tab
• Select "USB (autodetect)" in the serial ports selection tab
• Select your Alcatel phone model in the "MTK boot" drop-down menu
• Press "Unlock" button
  

Phone`s connecting and servicing:

• Plug the USB cable into the powered off phone...
• Install drivers for all devices that will appear in the system
• Message "Done" indicates that procedure was completed successfully
• Disconnect the handset.

Video tutorial available here:

Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

SigmaKey 2.29.20b1 MTK: Direct unlock (Alcatel 9027W)
Removing firmware protection...OK
Baseband Processor:MT6739, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 2 Gb
Detecting flash...eMMC, Flash size: 14.57 Gb
Phone model: TCL 9027W
Android 8.1.0
Firmware: 9027W-user 8.1.0 O11019 vATO-0 release-keys
Hardware IMEI: 015263001010625
Reading security block.........Please send
C:\Users\User\Documents\SigmaKey\temporary backup\0895332160\015263001010625_TCL 9027W.skb
file to [email protected]
Failed

@ juve2106,

Please upload temporary backup read from this phone to any filesharing web site and post link for it in a current thread.

Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

here is security backup
https://yadi.sk/d/LgEqP0ffPbk8XA

@ juve2106,

Current case was transferred to developers team for an analyzing purposes.

Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

me too alcatel 9027w unlocked done but still locked
hope sloves soon!

SigmaKey 2.30.00 MTK: Direct unlock (Alcatel 9027W)
Removing firmware protection...OK
Baseband Processor:MT6739, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 2 Gb
Detecting flash...eMMC, Flash size: 14.57 Gb
Phone model: TCL 9027W
Android 8.1.0
Firmware: 9027X-user 8.1.0 O11019 vATR-0 release-keys
Hardware IMEI: 015263000953023
Security area saved to "C:\Users\HATRANG\Documents\SigmaKey\security backup\0605073020\015263000953023_TCL 9027W (4).skb"
Unlocking phone.....Done
still phone locked pl inroved its

Dear users,

Sigma Software v2.30.01 has been just released.
With this release phone servicing via SPFT method has been improved.

Repeat operation using Sigma Software v2.30.01 and post results in a current thread.

Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

i try with different computers and different Windows, same problem

no yet solution for this problem??