Alcatel OT-223 Unlock Done

[jamal2010]

--- 2013-09-19 17:49:52 ---
SigmaKey 1.29.04 MTK: Direct unlock
USB Serial Port (COM5), Provider: FTDI, Driver ver.: 2.8.28.0, Date: 18/01/2013, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6223, HW Rev. A.08, SW Rev. A.00
Serial number: 1D410CA0
Testing external RAM...1 Mb
Detecting flash...NOR, ID: 0001227E-221A2201, manufacturer: AMD
Flash size: 4 Mb, TOP
File system: 352 Kb @ 003A0000
Phone model: Alcatel OT-223
Firmware: 223X-2CRGES1 199 XO19CB41 JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28
Hardware IMEI: 35xxxxxxxxxxxx
Security area saved to "C:\Documents and Settings\HP COMPUTER\Mes documents\SigmaKey\security backup\35xxxxxxxxxxxx_223X-2CRGES1 199 XO19CB41.skb"
Unlocking phone...Done
Formatting FFS...Done

[amira77]

thank you man i am just finish unlock one by this way on sigma box

[ryadjtn]

--------- 2017-10-04 12:39:08 ---------
SigmaKey 2.26.07b1 MTK: Direct unlock
USB Serial Port (COM9), Provider: FTDI, Driver ver.: 2.4.6.0, Date: 13/03/2008, FTDIBUS\COMPORT&VID_0403&PID_0000
Baud rate: 19200
Missing response from phone

[GSM_Support]

@ ryadjtn,

Please make sure that:

• You use the latest version of Sigma software
• Battery is fully charged
• All the side programs, that may interfere with the phone, are closed
• Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
• Phone's connection:
  • Via USB: connect phone to USB port placed on the backside of PC (motherboard's USB port)
    Do not connect or disconnect other USB cables into the PC during the actual work with the phone
  • Via COM: use recommended Prolific / FTDI drivers only
• Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
• Phone has stock (factory) firmware version
• SIM card is removed
• Repeat Unlock operation according to the manual.

Best Regards
GSMServer team