CDY-N29 huawei ID - GSM-Forum

ramzoun · 07-01-2022, 09:54

SigmaKey v.2.45.00 build 01
120914842 Sigma dongle 2.45, Initializing...OK
Pack 1: Not activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2022-07-01 09:45:23 ---------
SigmaKey 2.45.00b1 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.39 V
Phone model: CDY-NX9A
Build number: CDY-N29 10.1.1.259(C432E2R4P1)
Vendor/Country: hw/eu
System version: Skipped
Android version: 10
Base version: CDY-LGRP2-OVS 10.1.1.259
Custom version: CDY-N29-CUST 10.1.1.2(C432)
Preload version: CDY-N29-PRELOAD 10.1.1.1(C432R4)
Huawei-Over-the-Air info:
C_version: C432
D_version: D000
PLMN: 60502
BoardID: 10940
DeviceName: CDY-N29
Done

i try with 3 BOOT and some problem

SigmaKey 2.45.00b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985 (boot 3)
Sending boot...Error writing to serial port

SigmaKey 2.45.00b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985 (boot 2)
Sending boot...Error writing to serial port

--------- 2022-07-01 09:51:09 ---------
SigmaKey 2.45.00b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 820/985 (boot 1)
Sending boot...Error writing to serial port

ShaazGsm · 07-01-2022, 11:03

Did you find any solution -

Gsmserver · 07-01-2022, 11:48

I can buy this version of the phone board from you to analyze and find a solution. Are you ready to send?

ramzoun · 07-19-2022, 18:06

SigmaKey v.2.45.01
120914842 Sigma dongle 2.45, Initializing...OK
Pack 1: Not activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2022-07-19 17:54:50 ---------
SigmaKey 2.45.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM26), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port
--------- 2022-07-19 17:55:41 ---------
SigmaKey 2.45.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM26), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port
--------- 2022-07-19 17:59:21 ---------
SigmaKey 2.45.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM94), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port
--------- 2022-07-19 18:02:58 ---------
SigmaKey 2.45.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM94), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port

mohacraft · 01-07-2023, 18:33

Quote:

Originally Posted by Gsmserver

I can buy this version of the phone board from you to analyze and find a solution. Are you ready to send?

yes contact me here https://t.me/mohacraft8

mohacraft · 01-07-2023, 18:35

SigmaKey 2.46.00b1 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM46), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port

Steve-1 · 01-12-2023, 13:54

SigmaKey 2.46.00b2 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10-Aug-14, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port

Quote:

--------- 2023-01-12 13:53:52 ---------
SigmaKey 2.46.00b2 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.37 V
Phone model: CDY-NX9A
Build number: CDY-N29 12.0.0.282(C432E4R4P4)
Vendor/Country: hw/eu
System version: Skipped
Android version: 10
Base version: CDY-LGRP2-OVS 102.0.0.282
Custom version: CDY-N29-CUST 102.0.0.4(C432)
Preload version: CDY-N29-PRELOAD 102.0.0.4(C432R4)
Huawei-Over-the-Air info:
C_version: C432
D_version: D000
PLMN: 60402
BoardID: 10940
DeviceName: CDY-N29
Done

PC-CLINIC · 01-14-2023, 01:02

the same problem here
-------------------------
SigmaKey 2.46.00b2 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10-Aug-14, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port

PC-CLINIC · 01-14-2023, 01:03

the same problem
-----------------
SigmaKey 2.46.00b2 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10-Aug-14, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Sending boot...Error writing to serial port

Gsmserver · 01-14-2023, 15:56

Quote:

Sending boot...Error writing to serial port

You have the phone with a board version that is not supported by Sigma. But if you send this phone to us, we will try to add it to the supported list. Please contact Gsm_Support for details.

rickyalex · 01-23-2023, 10:05

--------- 2023-01-23 11:02:19 ---------
SigmaKey 2.46.00b2 HiSi: Remove FRP
HUAWEI USB COM 1.0 (COM15), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06.11.2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 820/985
Phone model: CDY-NX9A
Version: CDY-N29 12.0.0.296(C432E4R2P3)
Removing FRP lock...Done

Sorry
it is FRP

zakaria78 · 02-21-2023, 13:30

any news for this phone ?

mohacraft · 02-23-2023, 00:16

Quote:

Originally Posted by Gsmserver

I can buy this version of the phone board from you to analyze and find a solution. Are you ready to send?

hi
yes i can send but how ?
contact me here +212639386917 is my whatsapp

07-01-2022, 09:54	#1 (permalink)
ramzoun Insane Poster Join Date: Jun 2016 Location: gsmworld Posts: 64 Member: 2587446 Status: Offline Thanks Meter: 35	CDY-N29 huawei ID SigmaKey v.2.45.00 build 01 120914842 Sigma dongle 2.45, Initializing...OK Pack 1: Not activated Pack 2: Activated Pack 3: Activated Pack 4: Activated Pack 5: Activated --------- 2022-07-01 09:45:23 --------- SigmaKey 2.45.00b1 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: 4.39 V Phone model: CDY-NX9A Build number: CDY-N29 10.1.1.259(C432E2R4P1) Vendor/Country: hw/eu System version: Skipped Android version: 10 Base version: CDY-LGRP2-OVS 10.1.1.259 Custom version: CDY-N29-CUST 10.1.1.2(C432) Preload version: CDY-N29-PRELOAD 10.1.1.1(C432R4) Huawei-Over-the-Air info: C_version: C432 D_version: D000 PLMN: 60502 BoardID: 10940 DeviceName: CDY-N29 Done i try with 3 BOOT and some problem SigmaKey 2.45.00b1 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 (boot 3) Sending boot...Error writing to serial port SigmaKey 2.45.00b1 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 (boot 2) Sending boot...Error writing to serial port --------- 2022-07-01 09:51:09 --------- SigmaKey 2.45.00b1 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM79), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 820/985 (boot 1) Sending boot...Error writing to serial port

07-19-2022, 18:06	#4 (permalink)
ramzoun Insane Poster Join Date: Jun 2016 Location: gsmworld Posts: 64 Member: 2587446 Status: Offline Thanks Meter: 35	still some problem with new update. SigmaKey v.2.45.01 120914842 Sigma dongle 2.45, Initializing...OK Pack 1: Not activated Pack 2: Activated Pack 3: Activated Pack 4: Activated Pack 5: Activated --------- 2022-07-19 17:54:50 --------- SigmaKey 2.45.01 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM26), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port --------- 2022-07-19 17:55:41 --------- SigmaKey 2.45.01 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM26), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port --------- 2022-07-19 17:59:21 --------- SigmaKey 2.45.01 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM94), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port --------- 2022-07-19 18:02:58 --------- SigmaKey 2.45.01 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM94), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port

07-01-2022, 11:03	#2 (permalink)
ShaazGsm Freak Poster Join Date: Jul 2013 Location: Cape Town Posts: 159 Member: 1979291 Status: Offline Thanks Meter: 18	Did you find any solution -

07-01-2022, 11:48	#3 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,147 Member: 21077 Status: Offline Thanks Meter: 116,340	I can buy this version of the phone board from you to analyze and find a solution. Are you ready to send?

01-07-2023, 18:35	#6 (permalink)
mohacraft Freak Poster Join Date: Apr 2015 Location: Tétouan Age: 38 Posts: 233 Member: 2377800 Status: Offline Sonork: nono Thanks Meter: 48	SigmaKey 2.46.00b1 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM46), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port

01-14-2023, 01:02	#8 (permalink)
PC-CLINIC Freak Poster Join Date: Dec 2015 Location: Algeria Age: 38 Posts: 209 Member: 2508405 Status: Offline Sonork: 100.1671124 Thanks Meter: 93	the same problem here ------------------------- SigmaKey 2.46.00b2 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10-Aug-14, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port

01-14-2023, 01:03	#9 (permalink)
PC-CLINIC Freak Poster Join Date: Dec 2015 Location: Algeria Age: 38 Posts: 209 Member: 2508405 Status: Offline Sonork: 100.1671124 Thanks Meter: 93	the same problem ----------------- SigmaKey 2.46.00b2 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10-Aug-14, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Sending boot...Error writing to serial port

01-23-2023, 10:05	#11 (permalink)
rickyalex No Life Poster Join Date: Mar 2001 Location: RO Posts: 590 Member: 3761 Status: Offline Thanks Meter: 57	--------- 2023-01-23 11:02:19 --------- SigmaKey 2.46.00b2 HiSi: Remove FRP HUAWEI USB COM 1.0 (COM15), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06.11.2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 820/985 Phone model: CDY-NX9A Version: CDY-N29 12.0.0.296(C432E4R2P3) Removing FRP lock...Done Sorry it is FRP

02-21-2023, 13:30	#12 (permalink)
zakaria78 Freak Poster Join Date: May 2008 Location: morocco fes Posts: 193 Member: 782106 Status: Offline Thanks Meter: 8	any news for this phone ?