Dead after flash now Error
 

https://s5.postimg.org/k4pj7r93b/Sigma2.jpg
https://s5.postimg.org/yb5a2zc8n/Sigma.jpg
https://s5.postimg.org/9hvq2et93/Sigma4.jpg

SigmaKey v.2.27.03 build 01
335****** Sigma dongle 2.27, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-02-15 23:48:10 ---------
SigmaKey 2.27.03b1 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM185), Provider: HUAWEI, Driver ver.: 2.0.6.601, Date: 3/6/2013, USB\VID_12D1&PID_3609&REV_0000
Repairing...HD1CHMUMAA001057.skf
Writing flash...Memory allocation failed

Phone was on condition just flash for update but phone gone dead now i try to repair with *skf file but getting error
how to solve this error

@ SAHIL JARRAL,

Why you use an outdated Sigma Software version?
Install latest version and repeat operation once again.

Also, post here full log file from the first flashing operation (update).
Best Regards
GSMServer team


http://www.smart-clip.com/img/sigma_userbar.png

in latest version same error
 

[IMG]https://s10.postimg.org/nvp1gh01l/Sigma1.jpg[/IMG]
https://s10.postimg.org/cjcfylbw5/Sigma.jpg
here is flashing log of UPDATE.APP
SigmaKey v.2.27.01
335****** Sigma dongle 2.27, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-02-07 15:51:42 ---------
SigmaKey 2.27.01 HiSi: Write firmware
(ADB) Writing flash...UPDATE.APP
Firmware: CHM-U01C185B503
This operation may brick the phone! Are you sure you want to proceed? [YES]
Phone model: :CHM-U01
Version: :BalongV100R001C51B311
Writing flash modemimage...OK
Writing flash modemnvm1.0...OK
Writing flash mcuimage...OK
Writing flash hifi...OK
Writing flash dsp...OK
Writing flash dtimage...OK
Writing flash teeos...OK
Writing flash trustfirmware...OK
Writing flash securetystorage.0...OK
Writing flash nvme...OK
Writing flash fastboot...OK
Writing flash recovery...OK
Writing flash recovery2...OK
Writing flash boot...OK
Writing flash system.0...OK
Writing flash system.1...OK
Writing flash system.2...OK
Writing flash system.3...OK
Writing flash system.4...OK
Writing flash cache.0...OK
Writing flash cust.0...OK
Writing flash userdata.0...OK
Writing flash...Done
Restarting phone...OK

Solution
 

Any Solution please how i can recover now ?

sleeping
 

Now team is sleeping ?

Done
 

Finnaly Done [IMG]https://s10.postimg.org/g28p78mcl/Sigma_D.jpg[/IMG]

help
 

when i try to flash in Upgrade mode port not showing device detect as a usb mass storage
can you share driver or any other solution please

Install drivers from the manual.
Alternative way to install drivers: HiSuite - Android Smart Device Manager - Huawei Device., Co Ltd..

i already installed HiSuite but not show port please guide me how to install manual ?

Here are the drivers

when i flash UPDATE.AP in fast boot mode again set dead please tell me which file i use basically i want to update to 5.1.1 or 6.0 set was on 4.4.2

You need to recover the phone in fastboot mode. Then flash the file in UPGRADE mode.
Here is the manual: FLASH via fastboot mode (only for reviving of bricked devices)

sir i follow this guide
http://forum.gsmhosting.com/vbb/f719...tware-2287012/

Seems like your are flashing wrong flash file version via fastboot mode. Fastboot mode allows to flash almost anything you want to the phone.
But it doesn't mean that phone will accept and work with that firmware.

according to your Guide sir
[IMG]https://s10.postimg.org/r7mgu6gl1/1212.jpg[/IMG]

https://s10.postimg.org/93jg9zdw5/121.jpg

please give me correct file for flash