Huawei P Smart 2021 - GSM-Forum

IMEI_info · 10-22-2020, 13:26

What this error means??

Quote:

SigmaKey v.2.39.04
1xxxxxxxx Sigma dongle 2.39, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2020-10-22 14:21:25 ---------
SigmaKey 2.39.04 HiSi: Software testpoint On.../Off
DBAdapter Reserved Interface (COM6), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28/12/2015, USB\Vid_12D1&Subclass_13&Prot_23
Using extended heuristic method...
Inconsistent file "E:\FLASH\Huawei\P_Smart_2021_PPA-LX2\UPDATE.APP"

I use exactly the same version that got in phone
Peppa-L22B 10.1.1.109(C432E4R2P1)_Firmware_EMUI10.1.1_05017CQ G
This is the Huawei P Smart 2021 PPA-LX2 phone.

Read info:

Quote:

SigmaKey 2.39.04 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 3.94 V
Phone model: PPA-LX2
Build number: PPAH-L22 10.1.1.109(C432E4R2P1)
Vendor/Country: hw/eu
System version: Skipped
Android version: 10
Base version: PPAH-LGRP2-OVS 10.1.1.109
Custom version: PPAH-L22-CUST 10.1.1.4(C432)
Preload version: PPAH-L22-PRELOAD 10.1.1.1(C432R2)
Huawei-Over-the-Air info:
C_version: C432
D_version: D000
PLMN: 26006
BoardID: 11511
DeviceName: PPAH-L22
Done

IMEI_info · 10-22-2020, 13:32

Same on higher firmware

Quote:

DBAdapter Reserved Interface (COM6), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28/12/2015, USB\Vid_12D1&Subclass_13&Prot_23
Using extended heuristic method...
Inconsistent file "E:\FLASH\Huawei\P_Smart_2021_PPA-LX2\Peppa-L22B 10.1.1.125(C432E4R2P1) Firmware EMUI10.1.1 05017CRV\UPDATE.APP"

Gsmserver · 10-22-2020, 13:37

Try another flash file. It does not fit exactly to your device.

huaweinckunlock · 10-23-2020, 06:28

Hi, you firmware:

Huawei P Smart 2021 PPA-LX2 PPAH-L22 Peppa-L22B hw eu Peppa-L22B 10.1.1.109(C432E4R2P1)_Firmware_EMUI10.1.1_05017CQG [androidhost.ru].zip
https://androidhost.ru/XWc
Dated Uploaded: 06/10/2020 Filesize: 3.82 GB

GSM_Support · 11-26-2020, 17:15

@ hossain ahmed,

Please explain in more details what an issue you have.

Best Regards
GSMServer team

debeliamark · 12-11-2020, 11:48

SW TP work, but nothing more ...

Code:

SigmaKey v.2.39.04 build 02
12846xxx1 Sigma dongle 2.39, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Not activated
--------- 2020-12-11 12:32:04 ---------
SigmaKey 2.39.04b2 HiSi: Software testpoint On.../Off
DBAdapter Reserved Interface (COM11), Provider: HUAWEI Technologies CO.,LTD, Driver ver.: 1.0.26.0, Date: 18.5.2016 ã., USB\Vid_12D1&Subclass_13&Prot_23
Using extended heuristic method...
Hardware IMEI: 020304050607080
Flash file F:\GSM2\Huawei\PPA-Lx2 [P Smart 2021]\Software\dload\UPDATE.APP
Enabling diagnostic port...Done
We strictly recommend performing "Enable Downgrade" on "Flash" tab, as the first service operation on this device!
--------- 2020-12-11 12:33:38 ---------
SigmaKey 2.39.04b2 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM14), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28.11.2016 ã., USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710
Sending boot.....Error writing to serial port
--------- 2020-12-11 12:34:40 ---------
SigmaKey 2.39.04b2 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM14), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28.11.2016 ã., USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710
Sending boot...Error writing to serial port
--------- 2020-12-11 12:35:30 ---------
SigmaKey 2.39.04b2 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM14), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28.11.2016 ã., USB\VID_12D1&PID_3609&REV_0100
File I/O operation failed

GSM_Support · 12-11-2020, 13:06

@ debeliamark,

Issue related to Huawei P Smart 2021 / PPA-Lx2 phone model are getting deeply analyzed by product developers.

Best Regards
GSMServer team

Gsmserver · 12-18-2020, 11:33

Quote:

HiSilicon: Kirin 710
Sending boot...Error writing to serial port

Improved servicing of the devices based on HiSilicon Kirin 710.
Please repeat the operation using new Sigma installer.
Download it here

Select Kirin 710 bootloader

-=P.F.U=- · 12-28-2020, 15:40

--------- 2020-12-28 15:53:47 ---------
SigmaKey 2.39.05 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.09 V
Phone model: PPA-LX2
Build number: PPAH-L22 10.1.1.145(C185E5R3P1)
Vendor/Country: hw/meafnaf
System version: Skipped
Android version: 10
Base version: PPAH-LGRP2-OVS 10.1.1.145
Custom version: PPAH-L22-CUST 10.1.1.5(C185)
Preload version: PPAH-L22-PRELOAD 10.1.1.1(C185R3)
Huawei-Over-the-Air info:
C_version: C185
D_version: D000
PLMN: 65502
BoardID: 11515
DeviceName: PPAH-L22
Done

SigmaKey 2.39.07b1 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM52), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710
Phone model: PPA-LX2
Version: PPAH-L22 10.1.1.145(C185E5R3P1)
Removing FRP lock...Done
Removing Huawei ID....Done
--------- 2020-12-28 16:32:20 ---------
SigmaKey 2.39.07b1 HiSi: Read OEM Info...
Phone model: PPA-LX2
Build number: PPAH-L22 10.1.1.145(C185E5R3P1)
Reading data...Done
Security area saved to "E:\Huawei\PPAH-L22\PPAH-L22 Secure\Huawei_PPA-LX2_PPAH-L22 10.1.1.145(C185E5R3P1).img"
--------- 2020-12-28 16:33:43 ---------
SigmaKey 2.39.07b1 HiSi: Read secure data (certificate)...
Phone model: PPA-LX2
Build number: PPAH-L22 10.1.1.145(C185E5R3P1)
Security area saved to "E:\Huawei\PPAH-L22\PPAH-L22 Secure\Huawei_PPA-LX2_PPAH-L22 10.1.1.145(C185E5R3P1).skb"

debeliamark · 12-29-2020, 07:45

I can also confirm that Kirin 710A / Huawei P Smart 2021 / PPA-Lxx is supported by latest SigmaKey Application.

krzychunh · 12-29-2020, 11:22

Code:

SigmaKey v.2.39.07 build 02
634664929 Sigma dongle 2.39, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2020-12-29 11:16:52 ---------
SigmaKey 2.39.07b2 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM202), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 2015-11-06, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710 (v0)
Sending boot.....Failed

Code:

SigmaKey 2.39.07b2 HiSi: Software testpoint On.../Off
HUAWEI USB COM 1.0 (COM202), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 2015-11-06, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710 (v0)
Sending boot.....Error writing to serial port

Gsmserver · 12-29-2020, 11:50

krzychunh, you need to select "HiSilicon: Kirin 710"

krzychunh · 12-29-2020, 12:07

I chose 710 and 710 (0) in 710 Error writing to serial port, 710 (0) starts sending boot suddenly stops and throws error Sending boot failed, I checked with full battery and without battery the same effect

krzychunh · 12-30-2020, 08:34

Code:

SigmaKey v.2.39.07 build 02
634664929 Sigma dongle 2.39, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2020-12-30 08:30:57 ---------
SigmaKey 2.39.07b2 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM202), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 2015-11-06, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710 (v0)
Sending boot.....Error writing to serial port
--------- 2020-12-30 08:31:49 ---------
SigmaKey 2.39.07b2 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM202), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 2015-11-06, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 710
Sending boot...Failed

I tested on another phone - it doesn't work either

ekran1 · 02-13-2021, 12:59

not work and for me

i try with bootloader 710 and 710v0

i try HW TP i not work ( see pictures )

SW TP can't try becase i cant entar in UPGRADE MODE , my phone kill with downgrade and now is always is FASTBOOT mode.

--------- 2021-02-13 11:43:51 ---------
SigmaKey 2.40.02 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: -
Phone model: PPA-LX2
Build number: PPAH-L22 10.1.1.135(C432E4R4P1)
Vendor/Country: hw/eu
System version: Skipped
Android version: 10
Base version: PPAH-LGRP2-OVS 10.1.1.135
Custom version: PPAH-L22-CUST 10.1.1.4(C432)
Preload version: PPAH-L22-PRELOAD 10.1.1.1(C432R4)
Huawei-Over-the-Air info:
C_version: C432
D_version: D000
BoardID: 11515
DeviceName: PPAH-L22
Done

sw with this ver cant find..( this is update 200mb )

I tried to fix other phones, the same thing happens
SV TP works, but HW does not work .. the same was KIRIN710 in question.

I think there is a problem in the sigma program because everything worked great until sigma released SV tp.

12-28-2020, 15:40	#9 (permalink)
-=P.F.U=- No Life Poster Join Date: Mar 2018 Location: Future.... ✌️ Posts: 700 Member: 2825953 Status: Offline Thanks Meter: 246	PPA-LX2 Huawei ID Removed & Secure Data Reading Done --------- 2020-12-28 15:53:47 --------- SigmaKey 2.39.05 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: 4.09 V Phone model: PPA-LX2 Build number: PPAH-L22 10.1.1.145(C185E5R3P1) Vendor/Country: hw/meafnaf System version: Skipped Android version: 10 Base version: PPAH-LGRP2-OVS 10.1.1.145 Custom version: PPAH-L22-CUST 10.1.1.5(C185) Preload version: PPAH-L22-PRELOAD 10.1.1.1(C185R3) Huawei-Over-the-Air info: C_version: C185 D_version: D000 PLMN: 65502 BoardID: 11515 DeviceName: PPAH-L22 Done SigmaKey 2.39.07b1 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM52), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Phone model: PPA-LX2 Version: PPAH-L22 10.1.1.145(C185E5R3P1) Removing FRP lock...Done Removing Huawei ID....Done --------- 2020-12-28 16:32:20 --------- SigmaKey 2.39.07b1 HiSi: Read OEM Info... Phone model: PPA-LX2 Build number: PPAH-L22 10.1.1.145(C185E5R3P1) Reading data...Done Security area saved to "E:\Huawei\PPAH-L22\PPAH-L22 Secure\Huawei_PPA-LX2_PPAH-L22 10.1.1.145(C185E5R3P1).img" --------- 2020-12-28 16:33:43 --------- SigmaKey 2.39.07b1 HiSi: Read secure data (certificate)... Phone model: PPA-LX2 Build number: PPAH-L22 10.1.1.145(C185E5R3P1) Security area saved to "E:\Huawei\PPAH-L22\PPAH-L22 Secure\Huawei_PPA-LX2_PPAH-L22 10.1.1.145(C185E5R3P1).skb"

10-22-2020, 13:37	#3 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,144 Member: 21077 Status: Offline Thanks Meter: 116,337	Try another flash file. It does not fit exactly to your device.

10-23-2020, 06:28	#4 (permalink)
huaweinckunlock No Life Poster Join Date: Sep 2013 Location: Mongolia Posts: 753 Member: 2022955 Status: Offline Sonork: 100.1646687 Thanks Meter: 418	Hi, you firmware: Huawei P Smart 2021 PPA-LX2 PPAH-L22 Peppa-L22B hw eu Peppa-L22B 10.1.1.109(C432E4R2P1)_Firmware_EMUI10.1.1_05017CQG [androidhost.ru].zip https://androidhost.ru/XWc Dated Uploaded: 06/10/2020 Filesize: 3.82 GB

11-26-2020, 17:15	#5 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ hossain ahmed, Please explain in more details what an issue you have. Best Regards GSMServer team

12-11-2020, 13:06	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ debeliamark, Issue related to Huawei P Smart 2021 / PPA-Lx2 phone model are getting deeply analyzed by product developers. Best Regards GSMServer team

12-29-2020, 07:45	#10 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	I can also confirm that Kirin 710A / Huawei P Smart 2021 / PPA-Lxx is supported by latest SigmaKey Application.

12-29-2020, 11:50	#12 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,144 Member: 21077 Status: Offline Thanks Meter: 116,337	krzychunh, you need to select "HiSilicon: Kirin 710"

12-29-2020, 12:07	#13 (permalink)
krzychunh Freak Poster Join Date: Feb 2013 Location: Polska Posts: 162 Member: 1881160 Status: Offline Thanks Meter: 31	I chose 710 and 710 (0) in 710 Error writing to serial port, 710 (0) starts sending boot suddenly stops and throws error Sending boot failed, I checked with full battery and without battery the same effect

02-13-2021, 12:59	#15 (permalink)
ekran1 Insane Poster Join Date: Jul 2008 Location: Belgrade Posts: 75 Member: 823073 Status: Offline Thanks Meter: 3	not work and for me i try with bootloader 710 and 710v0 i try HW TP i not work ( see pictures ) SW TP can't try becase i cant entar in UPGRADE MODE , my phone kill with downgrade and now is always is FASTBOOT mode. --------- 2021-02-13 11:43:51 --------- SigmaKey 2.40.02 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: - Phone model: PPA-LX2 Build number: PPAH-L22 10.1.1.135(C432E4R4P1) Vendor/Country: hw/eu System version: Skipped Android version: 10 Base version: PPAH-LGRP2-OVS 10.1.1.135 Custom version: PPAH-L22-CUST 10.1.1.4(C432) Preload version: PPAH-L22-PRELOAD 10.1.1.1(C432R4) Huawei-Over-the-Air info: C_version: C432 D_version: D000 BoardID: 11515 DeviceName: PPAH-L22 Done sw with this ver cant find..( this is update 200mb ) I tried to fix other phones, the same thing happens SV TP works, but HW does not work .. the same was KIRIN710 in question. I think there is a problem in the sigma program because everything worked great until sigma released SV tp.