huawei P30 pro Android 11: how to repair CHIP DAMAGED? - GSM-Forum

kibkar_dz · 03-02-2021, 15:07

Hi all and sigma team
after remove huawei ID and FRP using TP with sigmakey
my phone is now say chip is damaged
how to fix it ?

SigmaKey v.2.40.02
33947XXX7 Sigma dongle 2.40, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Not activated
--------- 2021-03-02 13:22:48 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 980
Phone model: VOG-AL10
Version: VOG-AL10 11.0.0.135(C00E128R2P6)
Removing FRP lock...Done
Removing Huawei ID....Done

GSM_Support · 03-02-2021, 15:53

@ kibkar_dz,

More likely that the phone was serviced improper.
Post here all log files from an operations performed to this phone.

Best Regards
GSMServer team

kibkar_dz · 03-02-2021, 16:27

SigmaKey v.2.40.02
3394xxx67 Sigma dongle 2.40, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Not activated
--------- 2021-03-02 13:22:48 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 980
Phone model: VOG-AL10
Version: VOG-AL10 11.0.0.135(C00E128R2P6)
Removing FRP lock...Done
Removing Huawei ID....Done
--------- 2021-03-02 13:33:56 ---------
SigmaKey 2.40.02 HiSi: Read OEM Info...
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 980
Phone model: VOG-AL10
Version: VOG-AL10 11.0.0.135(C00E128R2P6)
Phone model: VOG-AL10
Build number: VOG-AL10 11.0.0.135(C00E128R2P6)
Reading data...Done
Security area saved to "C:\Users\kibka\Documents\SigmaKey\service files\03394xxx67\Huawei_VOG-AL10_VOG-AL10 11.0.0.135(C00E128R2P6).img"
--------- 2021-03-02 13:35:42 ---------
SigmaKey 2.40.02 HiSi: Read secure data (certificate)...
Phone model: VOG-AL10
Build number: VOG-AL10 11.0.0.135(C00E128R2P6)
Security area saved to "C:\Users\kibka\Documents\SigmaKey\security backup\0339xxxx67\Huawei_VOG-AL10_VOG-AL10 11.0.0.135(C00E128R2P6).skb"
--------- 2021-03-02 13:35:57 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
Phone model: VOG-AL10
Version: VOG-AL10 11.0.0.135(C00E128R2P6)
Removing Huawei ID....Done
Removing FRP lock...Done

kibkar_dz · 03-02-2021, 16:37

I found this repair method but it pays off

https://gsmxt.com/product/repair-chi...via-sigma-key/

GSM_Support · 03-02-2021, 16:57

@ kibkar_dz,

Please upload all security / temporary backups read from this phone to any filesharing web site and post it here.

Best Regards
GSMServer team

kibkar_dz · 03-02-2021, 18:05

Quote:

Originally Posted by GSM_Support

@ kibkar_dz,

Please upload all security / temporary backups read from this phone to any filesharing web site and post it here.

Best Regards
GSMServer team

https://filebin.net/3hcyxp6pefotlypq...rar?t=2occvkl3

huaweinckunlock · 03-02-2021, 20:51

Quote:

Originally Posted by kibkar_dz

Hi all and sigma team
after remove huawei ID and FRP using TP with sigmakey
my phone is now say chip is damaged
how to fix it ?

Your need downgrade firmware, use USB 1.0 and flash done.

Huawei P30 Pro VOG-AL10 all cn 高维禁用 VOGUE-AL10C 9.1.0.186(C00E180R2P1) Firmware 9.1.0 r1 EMUI9.1.0 05015NTA.zip
https://androidhost.ru/1M1w

makeenithar · 03-04-2021, 06:03

same problem here. any solution? or is it safe to downgrade via 1.0 mode?

chenhleang · 03-05-2021, 05:25

downgrade to emui 10 ! sigma not support kirin 980 emui 11 !

nur rahman711 · 04-15-2021, 21:40

huawei-y7a-ppa-lx2 remove huawei id done with sigma after password fingerprint and pattern lock not working also I can’t reset phone please help me

Gsmserver · 04-16-2021, 08:23

Quote:

Originally Posted by nur rahman711

huawei-y7a-ppa-lx2 remove huawei id done with sigma after password fingerprint and pattern lock not working also I can’t reset phone please help me

Downgrade this phone to lower firmware version and the issue will be solved.

bibi018 · 05-01-2021, 11:08

any hope to support vog-al10 with febrary 2021 patch security with 11 emui
to remove id huawei risk chip damaged with test point
emergency best team

bibi018 · 05-01-2021, 11:16

this is the log
any hope to downgrad this phone for remove huawei ID (i tried to downgrad with two files but no succes
1- VOGUE-AL10C 10.0.0.188(C00E85R2P8)_Firmware_EMUI10.0.0_05015NT A and
2- VOGUE-AL10C 9.1.0.162(C00E160R2P1)_Firmware_9.1.0_r1_EMUI9.1.0 _05015NTA )
SigmaKey 2.40.03 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.13 V
Phone model: VOG-AL10
Build number: VOG-AL10 11.0.0.136(C00E128R2P6)
Vendor/Country: all/cn
System version: Skipped
Android version: 10
Base version: VOG-LGRP1-CHN 11.0.0.136
Custom version: VOG-AL10-CUST 11.0.0.128(C00)
Preload version: VOG-AL10-PRELOAD 11.0.0.6(C00R2)
Huawei-Over-the-Air info:
C_version: C00
D_version: D000
PLMN: 20815
BoardID: 8556
DeviceName: VOG-AL10

bibi018 · 05-01-2021, 11:24

i need to remove id huawei but risk chip damaged vog-al10 emui11 kirin 980
SigmaKey 2.40.03 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.13 V
Phone model: VOG-AL10
Build number: VOG-AL10 11.0.0.136(C00E128R2P6)
Vendor/Country: all/cn
System version: Skipped
Android version: 10
Base version: VOG-LGRP1-CHN 11.0.0.136
Custom version: VOG-AL10-CUST 11.0.0.128(C00)
Preload version: VOG-AL10-PRELOAD 11.0.0.6(C00R2)
Huawei-Over-the-Air info:
C_version: C00
D_version: D000
PLMN: 20815
BoardID: 8556
DeviceName: VOG-AL10
emergency
best team

bibi018 · 05-01-2021, 11:29

please add vog-al10 id huawei remove with emui 11 kirin 980 risk of chip damaged
yours

05-01-2021, 11:16	#13 (permalink)
bibi018 No Life Poster Join Date: Dec 2013 Location: algeria Posts: 722 Member: 2081857 Status: Offline Sonork: 1000.2 Thanks Meter: 38	this is the log any hope to downgrad this phone for remove huawei ID (i tried to downgrad with two files but no succes 1- VOGUE-AL10C 10.0.0.188(C00E85R2P8)_Firmware_EMUI10.0.0_05015NT A and 2- VOGUE-AL10C 9.1.0.162(C00E160R2P1)_Firmware_9.1.0_r1_EMUI9.1.0 _05015NTA ) SigmaKey 2.40.03 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: 4.13 V Phone model: VOG-AL10 Build number: VOG-AL10 11.0.0.136(C00E128R2P6) Vendor/Country: all/cn System version: Skipped Android version: 10 Base version: VOG-LGRP1-CHN 11.0.0.136 Custom version: VOG-AL10-CUST 11.0.0.128(C00) Preload version: VOG-AL10-PRELOAD 11.0.0.6(C00R2) Huawei-Over-the-Air info: C_version: C00 D_version: D000 PLMN: 20815 BoardID: 8556 DeviceName: VOG-AL10 Last edited by bibi018; 05-01-2021 at 11:21.

03-02-2021, 15:53	#2 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ kibkar_dz, More likely that the phone was serviced improper. Post here all log files from an operations performed to this phone. Best Regards GSMServer team

03-02-2021, 16:27	#3 (permalink)
kibkar_dz Freak Poster Join Date: May 2007 Location: algeria Age: 56 Posts: 354 Member: 511607 Status: Offline Thanks Meter: 43	SigmaKey v.2.40.02 3394xxx67 Sigma dongle 2.40, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated Pack 4: Activated Pack 5: Not activated --------- 2021-03-02 13:22:48 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 980 Phone model: VOG-AL10 Version: VOG-AL10 11.0.0.135(C00E128R2P6) Removing FRP lock...Done Removing Huawei ID....Done --------- 2021-03-02 13:33:56 --------- SigmaKey 2.40.02 HiSi: Read OEM Info... HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 980 Phone model: VOG-AL10 Version: VOG-AL10 11.0.0.135(C00E128R2P6) Phone model: VOG-AL10 Build number: VOG-AL10 11.0.0.135(C00E128R2P6) Reading data...Done Security area saved to "C:\Users\kibka\Documents\SigmaKey\service files\03394xxx67\Huawei_VOG-AL10_VOG-AL10 11.0.0.135(C00E128R2P6).img" --------- 2021-03-02 13:35:42 --------- SigmaKey 2.40.02 HiSi: Read secure data (certificate)... Phone model: VOG-AL10 Build number: VOG-AL10 11.0.0.135(C00E128R2P6) Security area saved to "C:\Users\kibka\Documents\SigmaKey\security backup\0339xxxx67\Huawei_VOG-AL10_VOG-AL10 11.0.0.135(C00E128R2P6).skb" --------- 2021-03-02 13:35:57 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID Phone model: VOG-AL10 Version: VOG-AL10 11.0.0.135(C00E128R2P6) Removing Huawei ID....Done Removing FRP lock...Done

03-02-2021, 16:37	#4 (permalink)
kibkar_dz Freak Poster Join Date: May 2007 Location: algeria Age: 56 Posts: 354 Member: 511607 Status: Offline Thanks Meter: 43	I found this repair method but it pays off https://gsmxt.com/product/repair-chi...via-sigma-key/

03-02-2021, 16:57	#5 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ kibkar_dz, Please upload all security / temporary backups read from this phone to any filesharing web site and post it here. Best Regards GSMServer team

03-04-2021, 06:03	#8 (permalink)
makeenithar Freak Poster Join Date: Nov 2015 Posts: 369 Member: 2493496 Status: Offline Thanks Meter: 57	same problem here. any solution? or is it safe to downgrade via 1.0 mode?

03-05-2021, 05:25	#9 (permalink)
chenhleang Freak Poster Join Date: Jan 2016 Location: Cambodia Posts: 463 Member: 2514217 Status: Offline Thanks Meter: 113	downgrade to emui 10 ! sigma not support kirin 980 emui 11 !

04-15-2021, 21:40	#10 (permalink)
nur rahman711 Junior Member Join Date: Aug 2014 Location: south africa Posts: 2 Member: 2240286 Status: Offline Sonork: rasel mahmud Thanks Meter: 0	huawei-y7a-ppa-lx2 remove huawei id done with sigma after password fingerprint and pattern lock not working also I can’t reset phone please help me

05-01-2021, 11:08	#12 (permalink)
bibi018 No Life Poster Join Date: Dec 2013 Location: algeria Posts: 722 Member: 2081857 Status: Offline Sonork: 1000.2 Thanks Meter: 38	any hope to support vog-al10 with febrary 2021 patch security with 11 emui to remove id huawei risk chip damaged with test point emergency best team

05-01-2021, 11:24	#14 (permalink)
bibi018 No Life Poster Join Date: Dec 2013 Location: algeria Posts: 722 Member: 2081857 Status: Offline Sonork: 1000.2 Thanks Meter: 38	i need to remove id huawei but risk chip damaged vog-al10 emui11 kirin 980 SigmaKey 2.40.03 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: 4.13 V Phone model: VOG-AL10 Build number: VOG-AL10 11.0.0.136(C00E128R2P6) Vendor/Country: all/cn System version: Skipped Android version: 10 Base version: VOG-LGRP1-CHN 11.0.0.136 Custom version: VOG-AL10-CUST 11.0.0.128(C00) Preload version: VOG-AL10-PRELOAD 11.0.0.6(C00R2) Huawei-Over-the-Air info: C_version: C00 D_version: D000 PLMN: 20815 BoardID: 8556 DeviceName: VOG-AL10 emergency best team

05-01-2021, 11:29	#15 (permalink)
bibi018 No Life Poster Join Date: Dec 2013 Location: algeria Posts: 722 Member: 2081857 Status: Offline Sonork: 1000.2 Thanks Meter: 38	please add vog-al10 id huawei remove with emui 11 kirin 980 risk of chip damaged yours