Huawei POT LX1A DEAD AFTER FLASH [SOLVED]

[tpj420]

Hi team, I try to flash my Huawei pot lx1a c431 but phone dead after flash. Is it possible to repair dead boot using sigmakey ?
Thanks in advanced

[tpj420]

SigmaKey v.2.46.01
735482044 Sigma dongle 2.46, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2023-03-15 18:25:47 ---------
SigmaKey 2.46.01 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: -
Phone model: POT-LX1A
Build number: POT-LX1A 9.1.0.351(C431E4R2P1)
Vendor/Country: hw/eea
System version: Skipped
Android version: 9
Base version: POT-LGRP2-OVS 9.1.0.351
Custom version: POT-LX1A-CUST 9.1.0.4(C431)
Preload version: POT-L41B-PRELOAD 9.1.0.1(C431R2)
Huawei-Over-the-Air info:
C_version: C431
D_version: D000
PLMN: 61302
BoardID: 7448
DeviceName: POT-L41B
Done

[Gsmserver]

Please follow this guide

[tpj420]

SigmaKey v.2.46.01
735482044 Sigma dongle 2.46, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2023-03-16 09:35:54 ---------
SigmaKey 2.46.01 HiSi: Repair "Chip is damaged"
The phone is NOT connected properly. Read the manual at the official site for details.
--------- 2023-03-16 09:41:38 ---------
SigmaKey 2.46.01 HiSi: Software testpoint On.../Off
^ Android Sooner Single ADB InterfaceUnsupported
--------- 2023-03-16 09:41:52 ---------
SigmaKey 2.46.01 HiSi: Software testpoint On.../Off
^ Android Sooner Single ADB InterfaceUnsupported
--------- 2023-03-16 10:19:49 ---------
SigmaKey 2.46.01 HiSi: Remove FRP
Phone model: FLA-LX1
Version: FLA-LX1 8.0.0.120(C185)
Removing FRP lock...Done
--------- 2023-03-16 10:37:32 ---------
SigmaKey 2.46.01 HiSi: Remove FRP
Phone model: BLL-L21
Version: BLL-L21C185B382
Removing firmware protection....Failed
--------- 2023-03-16 10:44:23 ---------
SigmaKey 2.46.01 HiSi: Remove FRP
Phone model: BLL-L21
Version: BLL-L21C185B382
Removing firmware protection....Failed
--------- 2023-03-16 10:52:58 ---------
SigmaKey 2.46.01 Qcom: Remove FRP / Huawei ID
^ Android Sooner Single ADB InterfaceCommand not allowed
--------- 2023-03-16 10:53:16 ---------
SigmaKey 2.46.01 Qcom: Remove FRP / Huawei ID
^ Android Sooner Single ADB InterfaceCommand not allowed
--------- 2023-03-16 10:54:36 ---------
SigmaKey 2.46.01 HiSi: Remove FRP
Phone model: BLL-L21
Version: BLL-L21C185B382
Removing firmware protection....Failed
735482044 Sigma dongle 2.46, Initializing...OK
--------- 2023-03-16 11:55:46 ---------
SigmaKey 2.46.01 HiSi: Write firmware
Wrong selection of firmware files can damage the phone.
Are you sure you want to proceed? [YES]
Flash file C:\Users\LENOVO\Downloads\Huawei P Smart 2020 POT-LX1A hw eea Potter-L41B 9.1.0.351(C431E4R3P1) Firmware EMUI9.1.0 05016STJ [androidhost.ru]\Software\dload\update_sd_base\PTABLE.APP
Phone model: POT-LX1A
Version: POT-LX1A 9.1.0.351(C431E4R2P1)
Preparing...This Android security patch level is not supported.
Please wait for future updates.

[Gsmserver]

Try to connect to this phone using testpoint.
Select the corresponding firmware files just as it is described in the UPGRADE MODE flashing manual.

[tpj420]

Thanks. It had worked