|
HUAWEI TestPoint: Unexpected response from the phone --------- 2020-06-25 21:27:16 --------- SigmaKey 2.36.00 HiSi: Write firmware HUAWEI USB COM 1.0 (COM109), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.8.2014 г., USB\VID_12D1&PID_3609&REV_0100 Repairing...JSN-BD_1.0.0.60_Download.xml HiSilicon: Kirin 710 Connect this phone in FastBoot mode and retry operation! Can not flash .xml SigmaKey 2.36.00 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM109), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.8.2014 г., USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Phone model: JSN-L21 Unexpected response from the phone |
HUAWEI TestPoint: Unexpected response from the phone Quote:
--------- 2002-01-01 22:32:50 --------- SigmaKey 2.36.00 HiSi: Write firmware HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100 Repairing...FAY-BD 1.0.0.20.skf Sending boot.....Error writing to serial port |
sne-lx1 Kirin 710 ....kirin 710 still give error.... SigmaKey v.2.36.00 1120xxxxxxSigma dongle 2.36, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated Pack 4: Activated --------- 2002-01-01 22:38:34 --------- SigmaKey 2.36.00 HiSi: Write firmware HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100 Repairing...FAY-BD 1.0.0.20.skf Sending boot.....Error writing to serial port |
Adivasaro, 1) load fastboot 2) write original update.app flash file Quote:
|
Quote:
112xxxxxx Sigma dongle 2.36, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated Pack 4: Activated --------- 2002-01-01 22:38:34 --------- SigmaKey 2.36.00 HiSi: Write firmware HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100 Repairing...FAY-BD 1.0.0.20.skf Sending boot.....Error writing to serial port I have all packs activated ! I try flash fastboot but give me that error ! |
Use original update.app flash files. You are using board file. |
Quote:
--------- 2002-01-02 00:39:55 --------- SigmaKey 2.36.00 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Sending boot.....Error writing to serial port |
Charge phone's battery and repeat the service operation |
P30 Pro Vog-L29 :confused: SigmaKey 2.36.00 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM227), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 980 Sending boot....Failed --------- 2020-06-26 18:54:21 --------- SigmaKey 2.36.00 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM227), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 11/28/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 980 Sending boot....Failed |
jkm-lx3 no enter rescue mode put done but no is in rescue mode SigmaKey 2.36.00 HiSi: Remove FRP / Huawei ID Phone model: JKM-LX3 Version: :JKM-LX3 9.0.1.175(C25E2R1P6) Preparing...The phone is NOT connected properly. Read the manual at the official site for details. Note that operation will fail for new Android security patch levels. --------- 2020-06-26 22:11:22 --------- SigmaKey 2.36.00 HiSi: Rescue mode Phone model: JKM-LX3 Version: :JKM-LX3 9.0.1.175(C25E2R1P6) Entering Rescue mode.........Done |
first go to service tab and do Load Fastboot (phone must be in USB COM1 testpoint) than go to flash tab and select original update.app file (not the SKF board file that you have downloaded from BOOT-LOADER site) and flash your phone. |
--------- 2020-06-27 00:33:53 --------- SigmaKey 2.36.00 HiSi: Enable downgrade HUAWEI USB COM 1.0 (COM3), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 6. 11. 2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Getting info...Unexpected response from the phone |
DAMAGED OEMINFO VOG-L29 STUCK ON GETTING INFO CAN WE WRITE OEMINFO WITHOUT GETTING INFO?? SigmaKey 2.36.00 HiSi: Load FastBoot HUAWEI USB COM 1.0 (COM83), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 980 Getting info...Unexpected response from the phone --------- 2020-06-27 02:27:52 --------- |
--------- 2020-06-27 08:47:59 --------- SigmaKey 2.36.00 HiSi: Get device info Bootloader unlocked: NO FB unlocked: NO Battery voltage: - Phone model: Skipped Build number: Unexpected response from the phone |
Load fastboot on service tab, using huawei com1 port. Then reflash this phone with original update.app flash files. |
| All times are GMT +1. The time now is 07:52. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -