GSM-Forum - Hwv32 Au Japan.. What pack is required?

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- SigmaKey (https://forum.gsmhosting.com/vbb/f719/)

- - Hwv32 Au Japan.. What pack is required? (https://forum.gsmhosting.com/vbb/f719/hwv32-au-japan-what-pack-required-2945264/)

Hwv32 Au Japan.. What pack is required?

Gudday mates,

got here Hwv32 Au for unlock..

Code:

Pack 1: Not activated

Pack 2: Activated

Pack 3: Activated

Pack 4: Activated

Pack 5: Not activated

--------- 2021-02-05 11:52:08 ---------

SigmaKey 2.40.01 HiSi: Direct unlock

Android Adapter PCUI (COM74), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 12/28/2015, USB\Vid_12D1&Subclass_13&Prot_22

Connecting....

Android Adapter PCUI (COM74), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 12/28/2015, USB\Vid_12D1&Subclass_13&Prot_22

....You should activate required PACK to work with this model.

For more information visit www.sigmakey.com

i have packs 2,3,4..

thanks,

@ parengBok,

Huawei HWV32 is supported for the following operations:

Quote:

For Pack3 + Pack4 users

Change Vendor/Country/Model
ENABLE DOWNGRADE (TESTPOINT)
FLASH (factory, fastboot, upgrade) not all versions support this feature
Huawei ID remove
Load fastboot
Read/Write Huawei certificate
Software testpoint ON/OFF
Unlock

For Pack3 + Pack4 + Pack5 users

Enable Huawei certificate/calibrations sharing

For Pack1 users

Change Sim card mode (single-dual)
Repair IMEI, WI-FI, Bluetooth, serial numbers (Manufacture mode)
Unlock (Manufacture mode)
Work with Bootloader (Manufacture mode)
Wrong Code Counter Reset

For Pack3 users

FRP REMOVE
READ / Write OEM info (testpoint)

For Pack4 users

Downgrade / Change firmware (if downgrade file exists)
RESCUE MODE Entering (up to Android 9.x)
Write full OTA UPDATE files

Best Regards
GSMServer team

http://www.smart-clip.com/img/sigma_userbar.png

what mode am i going to use for pack 3 and 4 user? i dont have pack 1.. maybe this explains the error..
"You should activate required PACK to work with this model.
For more information visit www.sigmakey.com"

Quote:

Originally Posted by parengBok (Post 14326733)

You have 3+4 activated .. you can unlock this phone by software testpoint method or you can also use hardware testpoint method.

@ parengBok,

As it was already mentioned by malka4u, you can service phone via software or hardware testpoint operation.
Refer to this link for the detailed manual.

Best Regards
GSMServer team

http://www.smart-clip.com/img/sigma_userbar.png

Update:

unlocking error before downgrade:
logs

Code:

SigmaKey v.2.40.01

xxxxxxxxx Sigma dongle 2.40, Initializing...OK

Pack 1: Not activated

Pack 2: Activated

Pack 3: Activated

Pack 4: Activated

Pack 5: Not activated

--------- 2021-02-06 08:10:13 ---------

SigmaKey 2.40.01 HiSi: Direct unlock

HUAWEI USB COM 1.0 (COM77), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100

HiSilicon: Kirin 65x

Phone model: HWV32

Version: ANE-L12JPZ 9.1.0.281(C791E16R1P7)

SN: 3JQ7N18C28001035

IMEI1: 868565032360813

IMEI2: 868565032360813

MEID: 00000000000000

Phone model: HWV32

Build number: ANE-L12JPZ 9.1.0.281(C791E16R1P7)

Please send

C:\Users\x\Documents\SigmaKey\temporary backup\0234494180\868565032360813_000000000000000_Huawei_HWV32_ANE-L12JPZ 9_1_0_281(C791E16R1P7).skb

file to [email protected]

Failed

same error after downgrade:
logs

Code:

 --------- 2021-02-06 08:41:24 ---------

SigmaKey 2.40.01 HiSi: Direct unlock

HUAWEI USB COM 1.0 (COM77), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100

HiSilicon: Kirin 65x

Phone model: HWV32

Version: HWV32 8.0.0.120(C791)

SN: 3JQ7N18C28001035

IMEI1: 868565032360813

IMEI2: 868565032360813

MEID: 00000000000000

Phone model: HWV32

Build number: HWV32 8.0.0.120(C791)

Please send

C:\Users\x\Documents\SigmaKey\temporary backup\0234494180\868565032360813_000000000000000_Huawei_HWV32_HWV32 8_0_0_120(C791).skb

file to [email protected]

Failed

need tested file for unlock for this device..

current firmware of the phone is : Huawei ANE-L12JPZ 8.0.0.120(C791)

@ parengBok,

Upload temporary backups read from this phone to any filesharing web site and post link for them in a current thread.

Best Regards
GSMServer team

http://www.smart-clip.com/img/sigma_userbar.png

Quote:

Originally Posted by GSM_Support (Post 14328772)

Hwv32 Temp Backups

gudday mates,

still no luck.. no update ?? temporary backup has been uploaded already..