Motorola XT1756 repair IMEI done
 

Hey guys! I've bought sigma key, pack 1 and pack 2. Today I've activated both packs but I can't do anything.
I've traid to repair imei of a Moto C device (XT1756) but I've got the following message:

"You should activate required PACK to work with this model."

I've tried using another computer and device but I didn't get good results, I got the same message.

Do you know if a need another pack? or Can you help me to solve this problem?
Thanks

according to sigma key no pack required to repair imei of Motorola XT1756
https://forum.gsmhosting.com/vbb/att...1&d=1599882282

can you post your logs and proces you have done.

For sure, these are the logs and the process I've done to get this error.

Logs:
SigmaKey v.2.39.00
717714352 Sigma dongle 2.39, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Not activated
Pack 4: Not activated
Pack 5: Not activated
--------- 2020-09-12 01:24:19 ---------
SigmaKey 2.39.00 MTK: Repair IMEI (Moto C (XT1756))
You should activate required PACK to work with this model.
For more information visit sigmakey page


Process to get the error:
- Open SigmaKey program and go to the MTK platform
- Go to the IMEI option
- Serial Port: USB (autodetect)
- Select any device, for example this Motorola Moto C XT1756
- Write imei
- Click on Repair Imei

YOU CAN TRY IN META MODE IF DIRECT FLASH MODE FAILED

SEE THIS GUIDE ..(VIDEO)

-Open Sigma go to mtk platform
- Switch off mobile disconnect battery remove usb cable wait 10 second
- Insert battery, insert usb cable wait until meta mode port appear in serial port
- Go to the IMEI option
- Serial Port: meta port
- Fill imei
- Click on Repair Imei

I'll try tomorrow morning. (Now is too late here in Argentina)
Do you know if I need an specific driver to use the META mode?

Thanks

Thanks man. I could repair the imei following your steps.
I have another question, do you know how I can use octopus as interface for sigma key?

Thanks again.