Nova 5T frp.

[newfoundghori]

hi,


i need firmware firmware version for Yal-l21 to reset frp..thank you.

Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 3.84 V
Phone model: YAL-L21
Build number: YAL-L61 10.1.0.250(C636E3R1P1)
Vendor/Country: hw/spcseas
System version: Skipped
Android version: 10
Base version: YAL-LGRP4-OVS 10.1.0.250
Custom version: YAL-L61-CUST 10.0.0.3(C636)
Preload version: YAL-L61-PRELOAD 10.0.0.1(C636R1)
Huawei-Over-the-Air info:
C_version: C636
D_version: D000
PLMN: 51502
BoardID: 8890
DeviceName: YAL-L61
Done

[newfoundghori]

done

SigmaKey 2.39.00 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM82), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 980
Phone model: YAL-L21
Version: YAL-L61 10.1.0.250(C636E3R1P1)
Removing FRP lock...Done
Removing Huawei ID....Done

[mondano202]

how and setp by steps guide


is it tp process?

[huaweinckunlock]

Use for run SW TP mode firmware:
HLRCF Yale-L21A 10.1.0.241(C431E9R5P1)_Firmware_EMUI10.1.0_05015WM B [androidhost.ru].zip
https://androidhost.ru/XRb
Dated Uploaded: 29/09/2020 Filesize: 4.51 GB

https://sigmakey.com/en/supportedfea...?phone_id=2634
Software testpoint for devices on HiSilicon Kirin 710 / 65x / 95x / 810 / 820 / 960 / 970 / 980 / 985 / 990 / 990 5G

STEP 1: Prepare original update.app flash file

It must exactly match the smartphone’s firmware version:

You may take it from update_sd_base firmware folder
You may use original FullOtaUpdate file from this website
Use SD_update file type for the latest Android versions (Android 10.0.1, Android 10.1 and higher). Use the same or higher firmware version.
Don't forget to write down for yourself original firmware version of the device

STEP 2: Software testpoint - ON

Select "HISILICON" platform from the tab menu in the upper left side of the software
Go to the "Service" bookmark
Connect the phone to PC using USB cable in Upgrade mode:
Android 10: Press and hold VOL+ and Power ON buttons. Select "Upgrade mode -> USB upgrade" from the menu that will appear.
Android 9 and lower: vol+vol- and connect USB cable
Important: SD-card should be removed from the phone.
Press "Software Testpoint ON.../OFF" button
Select original update.app flash file in the menu that will appear (main file)
The device should now enter "Factory mode - HUAWEI USB COM 1.0"

[chenhleang]

Originally Posted by newfoundghori

done

SigmaKey 2.39.00 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM82), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 980
Phone model: YAL-L21
Version: YAL-L61 10.1.0.250(C636E3R1P1)
Removing FRP lock...Done
Removing Huawei ID....Done

how you do it? can post tutorial ?

[chenhleang]

Originally Posted by huaweinckunlock

Use for run SW TP mode firmware:
HLRCF Yale-L21A 10.1.0.241(C431E9R5P1)_Firmware_EMUI10.1.0_05015WM B [androidhost.ru].zip
https://androidhost.ru/XRb
Dated Uploaded: 29/09/2020 Filesize: 4.51 GB

https://sigmakey.com/en/supportedfea...?phone_id=2634
Software testpoint for devices on HiSilicon Kirin 710 / 65x / 95x / 810 / 820 / 960 / 970 / 980 / 985 / 990 / 990 5G

STEP 1: Prepare original update.app flash file

It must exactly match the smartphone’s firmware version:

You may take it from update_sd_base firmware folder
You may use original FullOtaUpdate file from this website
Use SD_update file type for the latest Android versions (Android 10.0.1, Android 10.1 and higher). Use the same or higher firmware version.
Don't forget to write down for yourself original firmware version of the device

STEP 2: Software testpoint - ON

Select "HISILICON" platform from the tab menu in the upper left side of the software
Go to the "Service" bookmark
Connect the phone to PC using USB cable in Upgrade mode:
Android 10: Press and hold VOL+ and Power ON buttons. Select "Upgrade mode -> USB upgrade" from the menu that will appear.
Android 9 and lower: vol+vol- and connect USB cable
Important: SD-card should be removed from the phone.
Press "Software Testpoint ON.../OFF" button
Select original update.app flash file in the menu that will appear (main file)
The device should now enter "Factory mode - HUAWEI USB COM 1.0"

does it work on YAL-L61 10.1.0.250(C636E3R1P1) frp ?