Oppo A31 frp done

[bencharqui1]

SigmaKey 2.46.00b2 MTK: Format FFS (Oppo A31)
Set the phone to SPFT mode (In most cases: hold Vol+Vol-)
MediaTek USB Port_V1633 (COM6), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 1/22/2015, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Removing firmware protection...(SB: YES, SLA: NO, DA: YES).......OK
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 4 Gb
Detecting flash...eMMC, Flash size: 116.50 Gb (150100445636444D)
Battery voltage: 4.19 V
Phone model: Oppo A31
Remove pattern lock, password codes, other user data...Done
--------- 2023-01-14 16:11:29 ---------
SigmaKey 2.46.00b2 MTK: Remove FRP (Oppo A31)
Set the phone to SPFT mode (In most cases: hold Vol+Vol-)
MediaTek USB Port_V1633 (COM6), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 1/22/2015, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Removing firmware protection...(SB: YES, SLA: NO, DA: YES).......OK
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 4 Gb
Detecting flash...eMMC, Flash size: 116.50 Gb (150100445636444D)
Battery voltage: 4.18 V
Phone model: Oppo A31
Security area saved to "C:\SigmaKey\security backup\0989762522\Oppo A31.skb"
Removing FRP lock....Done

[chezzter]

Originally Posted by bencharqui1

SigmaKey 2.46.00b2 MTK: Format FFS (Oppo A31)
Set the phone to SPFT mode (In most cases: hold Vol+Vol-)
MediaTek USB Port_V1633 (COM6), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 1/22/2015, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Removing firmware protection...(SB: YES, SLA: NO, DA: YES).......OK
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 4 Gb
Detecting flash...eMMC, Flash size: 116.50 Gb (150100445636444D)
Battery voltage: 4.19 V
Phone model: Oppo A31
Remove pattern lock, password codes, other user data...Done
--------- 2023-01-14 16:11:29 ---------
SigmaKey 2.46.00b2 MTK: Remove FRP (Oppo A31)
Set the phone to SPFT mode (In most cases: hold Vol+Vol-)
MediaTek USB Port_V1633 (COM6), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 1/22/2015, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Removing firmware protection...(SB: YES, SLA: NO, DA: YES).......OK
Baseband Processor:MT6765, HW Rev. A.00, SW Rev. 0.00
Testing external RAM...DRAM, 4 Gb
Detecting flash...eMMC, Flash size: 116.50 Gb (150100445636444D)
Battery voltage: 4.18 V
Phone model: Oppo A31
Security area saved to "C:\SigmaKey\security backup\0989762522\Oppo A31.skb"
Removing FRP lock....Done

but in y81 mtk cpu not succes allways phone not found


SigmaKey v.2.46.00 build 02
Sigma dongle 2.46, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2023-01-14 23:19:12 ---------
SigmaKey 2.46.00b2 MTK: Format FFS (Vivo Y81)
Disconnect the cable. Hold both Vol- and Vol+ buttons.
MediaTek PreLoader USB VCOM (Android) (COM3), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 22/01/2015, USB\VID_0E8D&PID_2000&REV_0100
Preparing.....Phone not found

[bencharqui1]

Install
MTK_QcomMtk_3.1.9
libusb
usbdk

[chezzter]

Originally Posted by bencharqui1

Install
MTK_QcomMtk_3.1.9
libusb
usbdk

ive install it all but nithing same