P40 Pro ELS-N29 (Huawei ID problem)

[Rorito]

Hi...


--------- 2023-01-31 21:36:41 ---------
SigmaKey 2.46.01 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.17 V
Phone model: ELS-NX9
Build number: ELS-N29 12.0.0.290(C605E2R3P4)
Vendor/Country: hw/la
System version: Skipped
Android version: 10
Base version: ELS-LGRP4-OVS 102.0.0.290
Custom version: ELS-N29-CUST 102.0.0.2(C605)
Preload version: ELS-N29-PRELOAD 102.0.0.4(C605R3)
Huawei-Over-the-Air info:
C_version: C605
D_version: D1
PLMN: 73003
BoardID: 9592
DeviceName: ELS-N29
Done


I'm trying to remove the Huawei ID but with every single Boot (P40/P40Pro, P40/P40Pro 5G) stuck on SENDING BOOT and then shows ERROR WRITING TO SERIAL PORT...

Can be done? Wich one should I select??

[Rorito]

Originally Posted by Rorito

Hi...


--------- 2023-01-31 21:36:41 ---------
SigmaKey 2.46.01 HiSi: Get device info
Bootloader unlocked: NO
FB unlocked: NO
Battery voltage: 4.17 V
Phone model: ELS-NX9
Build number: ELS-N29 12.0.0.290(C605E2R3P4)
Vendor/Country: hw/la
System version: Skipped
Android version: 10
Base version: ELS-LGRP4-OVS 102.0.0.290
Custom version: ELS-N29-CUST 102.0.0.2(C605)
Preload version: ELS-N29-PRELOAD 102.0.0.4(C605R3)
Huawei-Over-the-Air info:
C_version: C605
D_version: D1
PLMN: 73003
BoardID: 9592
DeviceName: ELS-N29
Done


I'm trying to remove the Huawei ID but with every single Boot (P40/P40Pro, P40/P40Pro 5G) stuck on SENDING BOOT and then shows ERROR WRITING TO SERIAL PORT...

Can be done? Wich one should I select??

--------------------------------------------
--------- 2023-01-31 21:51:49 ---------
SigmaKey 2.46.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM11), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 05-11-2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: P40/P40Pro 5G (boot 1)
Sending boot...Error writing to serial port

[Gsmserver]

Please select this boot.

Select Kirin 990 5G (boot 3)

Battery must be connected to the phone's board and fully charged

Show the log.

p.s. are you ready to sell me this device? (for investigating purposes)

[Rorito]

Originally Posted by Gsmserver

Please select this boot.

Battery must be connected to the phone's board and fully charged

Show the log.

p.s. are you ready to sell me this device? (for investigating purposes)

----------------------------------------------------

SigmaKey v.2.46.01
918XXXXX3 Sigma dongle 2.46, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Activated
--------- 2023-02-01 11:53:14 ---------
SigmaKey 2.46.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM15), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 05-11-2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: P40/P40Pro 5G (boot 3)
Sending boot...Error writing to serial port

I wish I could sell it to you or crash it against the floor.... =D But it's not mine

[Gsmserver]

You can ask the owner of the phone if he would like to sell it? If the phone is fully functional, I would buy it so that we can add it to the supported list.
Of course I will pay for shipping as well.
If you can help with this - I invite you to private messages.

[abrapy]

hello im having this problem when trying to connect an ELS NX9 to remove huawei id

this is smartclip2

--------- 2023-02-02 11:34:03 ---------
Smart-Clip 2 1.46.01 HiSi: Read OEM Info...
HUAWEI USB COM 1.0 (COM28), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/5/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: P40/P40Pro (boot 3)
Sending boot....Error writing to serial port
--------- 2023-02-02 11:59:32 ---------
Smart-Clip 2 1.46.01 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM28), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/5/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: P40/P40Pro 5G (boot 3)
Sending boot...Error writing to serial port

[happpy]

Els-n39 dead after downgrad to unlock huawei id
Writing flash preas.0...Unexpected response

[Gsmserver]

abrapy, are you ready to sell me this device? (for investigating purposes)

[abrapy]

Originally Posted by Gsmserver

abrapy, are you ready to sell me this device? (for investigating purposes)

i can talk to the customer. im from latin america

[pol meza]

I bought sigma with all the packs activated to be able to work with these models and it is a shame that huawei id cannot be removed, it is throwing money away sigma team very bad service very unprofessional

[Gsmserver]

Originally Posted by pol meza

I bought sigma with all the packs activated to be able to work with these models and it is a shame that huawei id cannot be removed, it is throwing money away sigma team very bad service very unprofessional

Thank you for contacting us. We have a vast database of successful service operation logs. If you have encountered an issue, please send us the log, and we will do our best to understand and resolve the problem for you.

[chezzter]

Originally Posted by Gsmserver

Thank you for contacting us. We have a vast database of successful service operation logs. If you have encountered an issue, please send us the log, and we will do our best to understand and resolve the problem for you.

pleasu support qualcomm module huawei id and latest krin cpu give users an exclusive update