hello i can't unlock P30 PRO VOG-L09 by manufacture mode kirin 980 android 9 Quote:
|
Quote:
Only working USB COM mode |
Quote:
|
Quote:
You can service the phone WITH or WITHOUT testpoint! Your phone runs on Kirin 980 cpu, so you need to select it during the service operation: |
Quote:
|
Nova 3i INE-LX1 imei repair failed ... --------- 2020-08-06 15:21:37 --------- SigmaKey 2.38.04 HiSi: Repair IMEI Connecting.... Android Adapter PCUI (COM86), Provider: HUAWEI Technologies CO.,LTD, Driver ver.: 1.0.26.0, Date: 5/18/2016, USB\Vid_12D1&Subclass_13&Prot_22 Firmware: System 8.2.0.076(00CY), Date: Mon Jul 2 19:16:05 CST 2018, Provider: hw/meafnaf Boot Version: System 8.2.0.076(00CY)_BOOT, FastBoot Version: Chipset-miami8.2.0.C10(002S)_FASTBOOT Recovery Version: (unknow), System Version: System 8.2.0.076(00CY) Removing firmware protection...Unable to connect to the server. Please check your network. Removing firmware protection...^ Android Composite ADB Interface Preparing...Please ROOT the phone first! --------- 2020-08-06 15:23:08 --------- SigmaKey 2.38.04 HiSi: Repair IMEI Connecting.... Android Adapter PCUI (COM86), Provider: HUAWEI Technologies CO.,LTD, Driver ver.: 1.0.26.0, Date: 5/18/2016, USB\Vid_12D1&Subclass_13&Prot_22 Firmware: System 8.2.0.076(00CY), Date: Mon Jul 2 19:16:05 CST 2018, Provider: hw/meafnaf Boot Version: System 8.2.0.076(00CY)_BOOT, FastBoot Version: Chipset-miami8.2.0.C10(002S)_FASTBOOT Recovery Version: (unknow), System Version: System 8.2.0.076(00CY) Removing firmware protection...This Android security patch level is not supported. Please wait for future updates. :confused::confused::eek: |
Quote:
|
Any one have LIO-AL00 new build firmware,huawei id problem |
Quote:
Please wait for the solution for this issue. |
Excellent updates, but I think they are forgetting the other brands, the only thing I see are updates for Huawei. Other users want to see updates for Motorola, Alcatel, ZTE and others. I only use this box very few times, because not only does Huawei come to my workshop. |
Quote:
Code: SigmaKey v.2.38.04 |
Quote:
thank you :) |
Mate 20 HMA-L29 Demo/Retail mode remove done by sigmabox!!! 1.Software testpoint on 2.Vendor hw ,country eu 3.Enable downgrade 4.Software testpoint off 5.Flash in upgrade mode Code: --------- 2020-08-06 23:16:43 --------- |
This is the best until Sigmakey does it better. Thanks... |
No yearly charge, no unlock credit like FuriousGold. Its a big bonus man. I can't use my FuriousGold after purchasing. Stuck with Pack 2, pack 5. Yet more expensive to renew. But sigmakey gives me all in full till date. Sigmakey, if it requires you to add unlock credits for exclusive solution. Please do. All we care about is "Let it work" |
Quote:
Chimera requires 108 credits for one FRP transaction and also charges an annual fee. Like a joke. Sigmakey is the best right now. Congratulations |
Quote:
No need charge credtits we hate charging credits This method is good Activate pack permanently give solutions No need charge credit also we really hate about that |
still locked with huawei id --------- 2020-08-07 11:11:41 --------- SigmaKey 2.38.04 HiSi: Software testpoint On.../Off HUAWEI USB COM 1.0 (COM452), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G Phone model: ANA-NX9 Version: ANA-N29 10.1.0.131(C432E6R5P2) Verifying....Not found --------- 2020-08-07 11:12:51 --------- SigmaKey 2.38.04 HiSi: Get device info SN: VWS0220428006805 IMEI1: 863725043527603 IMEI2: 863725043527603 MEID: A00000B6D531DC Bootloader unlocked: YES FB unlocked: YES Battery voltage: - Phone model: ANA-NX9 Build number: ANA-N29 10.1.0.131(C432E6R5P2) Vendor/Country: hw/eu System version: Skipped Android version: 10 Base version: ANA-LGRP4-OVS 10.1.0.131 Custom version: ANA-N29-CUST 10.1.0.6(C432) Preload version: ANA-N29-PRELOAD 10.1.0.2(C432R5) Huawei-Over-the-Air info: C_version: C432 D_version: D000 PLMN: 23426 BoardID: 9490 DeviceName: ANA-N29 Done --------- 2020-08-07 11:20:04 --------- SigmaKey 2.38.04 HiSi: Software testpoint On.../Off DBAdapter Reserved Interface (COM431), Provider: HUAWEI Technologies CO.,LTD, Driver ver.: 1.0.26.0, Date: 18/05/2016, USB\Vid_12D1&Subclass_13&Prot_23 Using extended heuristic method... Hardware IMEI: 020304050607080 Flash file C:\Users\aasik\Desktop\ANA-N29_hw_eu\update_sd_base\UPDATE.APP Enabling diagnostic port...Done We strictly recommend performing "Enable Downgrade" on "Flash" tab, as the first service operation on this device! --------- 2020-08-07 11:20:32 --------- SigmaKey 2.38.04 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM452), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G Phone model: ANA-NX9 Version: ANA-N29 10.1.0.131(C432E6R5P2) Removing FRP lock...Done Removing Huawei ID....Done --------- 2020-08-07 11:21:46 --------- SigmaKey 2.38.04 HiSi: Software testpoint On.../Off HUAWEI USB COM 1.0 (COM452), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G Phone model: ANA-NX9 Version: ANA-N29 10.1.0.131(C432E6R5P2) Using extended heuristic method... This operation may brick the phone if the phone firmware version does not EXACTLY match the software testpoint firmware version! If you are unsure, better completely reflash the firmware. Are you sure you want to proceed? [YES] Repairing.........Done |
Please add test point image. I have one mate 30 pro dead, not detected by windows |
@ valiu, What had happened to this phone? Testpoint picture for TESTPOINT-HUAWEI_P30 PRO VOG-AL00.jpg available at Boot-Loader.com in the Free Sigma section. Best Regards GSMServer team http://www.smart-clip.com/img/sigma_userbar.png |
Someone tried to remove huawei id remotely and phone died. Got it from other service but this is the short story. We talk about MATE 30 PRO |
We Need Read/write cert of kirin 710 to 980 please?? Sigma box 👌 |
Quote:
|
100$ pagaria sin problemas Quote:
|
Please add option to read bootloader unlock code / Playstore certification on latest models (popular issue and not available for all devices) |
My Sigma has failed to remove firmware protection for three days. My Sigma serial number is 633928734 |
@ liuyinxin, Please explain in more details what an issue exactly you are dealing with. Make a new thread and post log files from the operations you are trying to perform. Best Regards GSMServer team http://www.smart-clip.com/img/sigma_userbar.png |
please add exit factory mode (com 1.0) in next update! |
Quote:
But what I don't like about it is after rest Frp/Huawei ID Phone goes back to com1. 0 and to remove it again needs sending boot, removing software protection And most cases it gives error saying wait in 564******* secs so annoying. Need to retry before it can work |
I personally want to appreciate sigma for their works. I discovered tecno camon 11 and sa1 pro model selection actually service major infinix and tecno secure boot devices that are not added on the list. I want sigma team to add the new infinix note 7 models to complete the support of the secure boots. Thanks Sent from my SM-A730F using Tapatalk |
need big file collection |
Excellent updates, kirin 710 Imei repair is it possible? |
@ MR SALAUDDIN, At the moment, Kirin 710 based phone models are not supported for IMEI repair operation, wait for future releases. Best Regards GSMServer team http://www.smart-clip.com/img/sigma_userbar.png |
Huawei Mate 20 latest 10.1.0.270 service - FRP and OEM This phone can't be downgraded to any 10.0.x.xxx or earlier version (without to open it) - do not tested only with MRToKey. SigmaKey itself cannot downgrade it [HMA-L09CA_10.0.0_C432.skf is incompatible] also. I wasn't find a full flash HMA-L29 10.1.0.270(C432E8R1P5) and use via easy-firmware_dot_com 10.1.0.273(C185E5R2P4) to extract the main version update.app. In fact - it's working [ fast SW testpoint / enable diagnostic mode / unlocked Bootloader ] using it and go back to working phone: Code: --------- 2020-08-12 16:01:11 --------- WBR, DebeliaMark, BG |
please help i always get this error on many phones and to work i have to reflash the phone SigmaKey 2.38.04 HiSi: Software testpoint On.../Off HUAWEI USB COM 1.0 (COM88), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28/11/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Phone model: MAR-LX1M Version: MAR-L21MEA 10.0.0.237(C185E3R2P4) Removing firmware protection.....Wait 851026987 seconds and retry --------- 2020-08-12 18:13:20 --------- SigmaKey 2.38.04 HiSi: Software testpoint On.../Off HUAWEI USB COM 1.0 (COM88), Provider: Huawei Incorporated, Driver ver.: 2.0.6.725, Date: 28/11/2016, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 710 Phone model: MAR-LX1M Version: MAR-L21MEA 10.0.0.237(C185E3R2P4) Verifying....Not found |
@ okello, Provide us with full information on an issue you are dealing with. Make a separate thread and post full details and all log files from an operations you have performed to it. Best Regards GSMServer team http://www.smart-clip.com/img/sigma_userbar.png |
@gsm_support & team ❌Wait 851026987 seconds and retry ❌Verifying....Not found ❌ Send boot error [when try to s/w testpoint off 990 5g] And many of fails s/w testpoint off function after entering factory mode Lot of users fail these bugs. Please try to fix this |
Thanks for all the logs and detailed problem descriptions. Of course, they are all analyzed and the program will be improved in the coming updates. |
Me also get this error, but when retrying problem is solved Sent from my iPhone using Tapatalk |
niec team • Devices with latest Android versions are supported, including Android 10.1 and higher |
Quote:
|
nice SIGMAKEY great |
please add repair SN for p40 pro SigmaKey 2.40.06 HiSi: Repair Phone model: ELS-NX9 Build number: ELS-N29 10.1.0.131(C432E8R6P1) Reading data...Security area saved to "C:\Users\.\Documents\SigmaKey\service files\.\Huawei_ELS-NX9_ELS-N29 10_1_0_131(C432E8R6P1) (2).skb" Repairing... SN: Unsupported Repairing...Failed after downgrade the phone lose ota updates and the SN change to generic sn |
Hi sigma cannot remove huawei id p40 pro error igmaKey 2.45.03b2 HiSi: Software testpoint On.../Off HUAWEI USB COM 1.0 (COM2), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G Sending boot...Failed |
Quote:
Select Kirin 990 5G (P40/P40 Pro). Service the device with the charged and connected battery. |
All times are GMT +1. The time now is 22:54. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -