Sigma Software v.2.39.05. Huawei ID remove for P40 series - Page 4 - GSM-Forum

dragosgsm · 02-20-2021, 10:13

--------- 2021-02-20 11:08:22 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 990 (P40/P40 Pro)
Sending boot....Error B00720AA
--------- 2021-02-20 11:09:09 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 990 5G (P40/P40 Pro)
Connecting........................................ .......................Failed

Can't unlock Huawei ID,please help!!!

dragosgsm · 02-20-2021, 10:42

I had tryed all boot versions and didn't succeded:

--------- 2021-02-20 11:08:22 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 990 (P40/P40 Pro)
Sending boot....Error B00720AA
--------- 2021-02-20 11:09:09 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 990 5G (P40/P40 Pro)
Connecting........................................ .......................Failed
--------- 2021-02-20 11:31:39 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 990
Sending boot....Error B00720AA
--------- 2021-02-20 11:33:22 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 990 (v0)
Sending boot....Error writing to serial port
--------- 2021-02-20 11:34:21 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 990 5G
Phone model: ELS-NX9
Version: ELS-N29 11.0.0.168(C432E3R6P4)
Removing firmware protection.....Failed
--------- 2021-02-20 11:37:53 ---------
SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 990 5G (v0)
Sending boot....Error B00720AA

Gsmserver · 02-21-2021, 08:06

dragosgsm, what phone model and what firmware version does this phone have?
Service Operations -> Get device info

+just in case, let me remind you

Quote:

Battery must be connected to the phone's board and fully charged. Especially while performing operations using testpoint.

casper2233 · 02-21-2021, 11:45

LeEco Le 2 X527 Repair Imei Done!!!

--------- 2021-02-21 14:41:03 ---------
SigmaKey 2.40.02 Qcom: Repair IMEI
Qualcomm HS-USB Diagnostics 9025 (COM103), Provider: Qualcomm Incorporated, Driver ver.: 2.1.2.0, Date: Ср 08.07.15, USB\VID_05C6&PID_9025&REV_0310&MI_00
Version: IMXOSOP5801910311S release-keys
Firmware: MPSS.TA.2.0.c18-00004-8976_GEN_PACK-1.65238.1.66782.1
Date: Sep 29 2016 14:25:20, Aug 11 2016 02:00:00, 8976.gen
Software IMEI1: 86994502061xxxx
Software IMEI2: 86994502061xxxx
Bluetooth address: 000000000000
Repaired IMEI1: 35925207556xxxx
Repaired IMEI2: 35381705922xxxx
Done
Restarting phone...Done

Diag code: *#*#76937#*#*

lucky99 · 05-12-2021, 08:43

still lock

--------- 2021-05-12 14:06:57 ---------
SigmaKey 2.40.08b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM23), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100
Terms of Remove Huawei ID operation:
1) 90 authorizations will be deducted from your account (non-refundable).
2) The battery must be connected to the phone's board and fully charged.
Do you agree to these terms? [YES]
HiSilicon: Kirin 990 5G (P40/P40 Pro)
Phone model: ELS-N39
Version: ELS-N39 11.0.0.175(C636E2R1P3)
SN: 7QQ0220618001074
IMEI1: 866095040595822
IMEI2: 866095040595822
MEID: A00000B8A43255
Phone model: ELS-N39
Build number: ELS-N39 11.0.0.175(C636E2R1P3)
Security area saved to "C:\Users\User\Documents\SigmaKey\security backup\0561898935\866095040595822_866095040598826_ Huawei_ELS-N39_ELS-N39 11_0_0_175(C636E2R1P3).skb"
Removing Huawei ID...Done

Gsmserver · 05-12-2021, 08:53

lucky99, repeat the ID remove operation once again.

meltonjimenez · 07-20-2021, 11:16

Phone model: ANA-AN00
Version: ANA-AN00 2.0.0.136(C00E130R4P5)

SigmaKey 2.40.09b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 990 5G (v0)
Sending boot....Error B00720AA

Gsmserver · 07-20-2021, 11:18

select "Kirin 990 5G (P40/P40 Pro)" bootloader

meltonjimenez · 07-20-2021, 11:52

Quote:

Originally Posted by Gsmserver

select "Kirin 990 5G (P40/P40 Pro)" bootloader

SigmaKey 2.40.09b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
Terms of Remove Huawei ID operation:
1) 90 authorizations will be deducted from your account (non-refundable).
2) The battery must be connected to the phone's board and fully charged.
Do you agree to these terms? [YES]
HiSilicon: Kirin 990 5G (P40/P40 Pro)
Phone model: ANA-AN00
Version: ANA-AN00 2.0.0.136(C00E130R4P5)
SN: VEG0220902012444
IMEI1: 868345043643345
IMEI2: 868345043643345
MEID: A00000BA7ED7CE
Phone model: ANA-AN00
Build number: ANA-AN00 2.0.0.136(C00E130R4P5)
Performing heuristic analysis (stage 5 of 11)...Please send
C:\Users\melton\Documents\SigmaKey\temporary backup\0296426514\868345043643345_868345043864941_ Huawei_ANA-AN00_ANA-AN00 2_0_0_136(C00E130R4P5).skb
file to [email protected]
Failed

security back up

https://www.4shared.com/archive/5jdm...96426514.html?

GSM_Support · 07-20-2021, 14:18

@ meltonjimenez,

Current case is getting deeply analyzed, thanks for the report.

Best Regards
GSMServer team

Gsmserver · 09-14-2021, 11:35

Quote:

Originally Posted by meltonjimenez

SigmaKey 2.40.09b1 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver

Please download new Sigma version and repeat the operation

Sabbirahmednil · 08-16-2022, 09:17

igmaKey 2.45.03 HiSi: Remove Huawei ID
HUAWEI USB COM 1.0 (COM35), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100
The battery must be connected to the phone's board and fully charged. [YES]
HiSilicon: Kirin 820/985
Phone model: JEF-NX9
Version: JEF-N29 12.0.0.232(C185E5R4P3)
SN: DBPDU20915001747
OEM Info IMEI1:
OEM Info IMEI2:
MEID: A00000BAC3629D
Phone model: JEF-NX9
Build number: JEF-N29 12.0.0.232(C185E5R4P3)
Security area saved to "C:\Users\AROVI ISLAM\Documents\SigmaKey\security backup\\-NX9_JEF-N29 12_0_0_232(C185E5R4P3) (0).skb"
This phone has a specific firmware version.
Read the manual on the official website for additional steps to be performed.

Anyone have solution?

GSM_Support · 08-16-2022, 09:57

@ Sabbirahmednil,

As it is stated in the log file you have posted, phone you have has a specific firmware version.
In order to be able to service phone with such firmware version you can perform following operations:

IMPORTANT! Read phone’s firmware (backup)
Downgrade phone’s firmware version
Run Remove Huawei ID operation

For more detailed information, check full manuals on a supported operations by referring to this link.

Best Regards
GSMServer team

08-16-2022, 09:57	#58 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ Sabbirahmednil, As it is stated in the log file you have posted, phone you have has a specific firmware version. In order to be able to service phone with such firmware version you can perform following operations: IMPORTANT! Read phone’s firmware (backup) Downgrade phone’s firmware version Run Remove Huawei ID operation For more detailed information, check full manuals on a supported operations by referring to this link. Best Regards GSMServer team

02-20-2021, 10:13	#46 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	--------- 2021-02-20 11:08:22 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 990 (P40/P40 Pro) Sending boot....Error B00720AA --------- 2021-02-20 11:09:09 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 990 5G (P40/P40 Pro) Connecting........................................ .......................Failed Can't unlock Huawei ID,please help!!!

02-20-2021, 10:42	#47 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	I had tryed all boot versions and didn't succeded: --------- 2021-02-20 11:08:22 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 990 (P40/P40 Pro) Sending boot....Error B00720AA --------- 2021-02-20 11:09:09 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM18), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 990 5G (P40/P40 Pro) Connecting........................................ .......................Failed --------- 2021-02-20 11:31:39 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 Sending boot....Error B00720AA --------- 2021-02-20 11:33:22 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 (v0) Sending boot....Error writing to serial port --------- 2021-02-20 11:34:21 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G Phone model: ELS-NX9 Version: ELS-N29 11.0.0.168(C432E3R6P4) Removing firmware protection.....Failed --------- 2021-02-20 11:37:53 --------- SigmaKey 2.40.02 HiSi: Remove FRP / Huawei ID HUAWEI USB COM 1.0 (COM101), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G (v0) Sending boot....Error B00720AA

02-21-2021, 11:45	#49 (permalink)
casper2233 Major Poster Join Date: Nov 2016 Location: Uzbekistan Posts: 45 Member: 2654930 Status: Offline Sonork: CaspeR Thanks Meter: 49	LeEco Le 2 X527 Repair Imei Done!!! --------- 2021-02-21 14:41:03 --------- SigmaKey 2.40.02 Qcom: Repair IMEI Qualcomm HS-USB Diagnostics 9025 (COM103), Provider: Qualcomm Incorporated, Driver ver.: 2.1.2.0, Date: Ср 08.07.15, USB\VID_05C6&PID_9025&REV_0310&MI_00 Version: IMXOSOP5801910311S release-keys Firmware: MPSS.TA.2.0.c18-00004-8976_GEN_PACK-1.65238.1.66782.1 Date: Sep 29 2016 14:25:20, Aug 11 2016 02:00:00, 8976.gen Software IMEI1: 86994502061xxxx Software IMEI2: 86994502061xxxx Bluetooth address: 000000000000 Repaired IMEI1: 35925207556xxxx Repaired IMEI2: 35381705922xxxx Done Restarting phone...Done Diag code: ##76937##

05-12-2021, 08:43	#50 (permalink)
lucky99 Freak Poster Join Date: Sep 2003 Location: Paradise Age: 60 Posts: 255 Member: 39477 Status: Offline Thanks Meter: 14	still lock --------- 2021-05-12 14:06:57 --------- SigmaKey 2.40.08b1 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM23), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 06/11/2015, USB\VID_12D1&PID_3609&REV_0100 Terms of Remove Huawei ID operation: 1) 90 authorizations will be deducted from your account (non-refundable). 2) The battery must be connected to the phone's board and fully charged. Do you agree to these terms? [YES] HiSilicon: Kirin 990 5G (P40/P40 Pro) Phone model: ELS-N39 Version: ELS-N39 11.0.0.175(C636E2R1P3) SN: 7QQ0220618001074 IMEI1: 866095040595822 IMEI2: 866095040595822 MEID: A00000B8A43255 Phone model: ELS-N39 Build number: ELS-N39 11.0.0.175(C636E2R1P3) Security area saved to "C:\Users\User\Documents\SigmaKey\security backup\0561898935\866095040595822_866095040598826_ Huawei_ELS-N39_ELS-N39 11_0_0_175(C636E2R1P3).skb" Removing Huawei ID...Done

05-12-2021, 08:53	#51 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,147 Member: 21077 Status: Offline Thanks Meter: 116,340	lucky99, repeat the ID remove operation once again.

07-20-2021, 11:16	#52 (permalink)
meltonjimenez Freak Poster Join Date: Jun 2014 Location: quezon city, PH Posts: 247 Member: 2199451 Status: Offline Thanks Meter: 74	Phone model: ANA-AN00 Version: ANA-AN00 2.0.0.136(C00E130R4P5) SigmaKey 2.40.09b1 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM17), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 990 5G (v0) Sending boot....Error B00720AA

07-20-2021, 11:18	#53 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,147 Member: 21077 Status: Offline Thanks Meter: 116,340	select "Kirin 990 5G (P40/P40 Pro)" bootloader

07-20-2021, 14:18	#55 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ meltonjimenez, Current case is getting deeply analyzed, thanks for the report. Best Regards GSMServer team

08-16-2022, 09:17	#57 (permalink)
Sabbirahmednil Junior Member Join Date: Sep 2018 Location: Bangladesh Posts: 10 Member: 2863414 Status: Offline Thanks Meter: 0	igmaKey 2.45.03 HiSi: Remove Huawei ID HUAWEI USB COM 1.0 (COM35), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 11/6/2015, USB\VID_12D1&PID_3609&REV_0100 The battery must be connected to the phone's board and fully charged. [YES] HiSilicon: Kirin 820/985 Phone model: JEF-NX9 Version: JEF-N29 12.0.0.232(C185E5R4P3) SN: DBPDU20915001747 OEM Info IMEI1: OEM Info IMEI2: MEID: A00000BAC3629D Phone model: JEF-NX9 Build number: JEF-N29 12.0.0.232(C185E5R4P3) Security area saved to "C:\Users\AROVI ISLAM\Documents\SigmaKey\security backup\\-NX9_JEF-N29 12_0_0_232(C185E5R4P3) (0).skb" This phone has a specific firmware version. Read the manual on the official website for additional steps to be performed. Anyone have solution?