Sigma Software v1.18.01: ZTE Blade III and a group of new Huawei smartphones added - GSM-Forum

GSM_Support · 11-23-2012, 13:06

Sigma Software v1.18.01
and Sigma Firmware v1.20

More new Huawei smartphones added to the list of supported.

Release Notes:

Qualcomm updates:

1. Added Direct Unlock / Get Unlock Codes
for the following Huawei models:

U8680 / T-Mobile Ascend G312 / Phoenix / T-Mobile myTouch
U8730 / Buddy / Unite Q / T-Mobile myTouch Q
U8800 / Huawei Ideos X5 / MTS NEO
U8800-51 / Impulse 4G
U8800 Pro
U8860 / Honor
C8860E / Honor

You can find connection procedure for the group of listed above
models in the "Qualcomm manual" section.

2. Added 2 new firmware versions for Motorola EX130 Fast Direct Unlock.
It means that even more firmware versions for this devices can now be
unlocked in a fast way, avoiding slow heuristic method of unlocking
(in case of unknown firmware version).

MTK updates:

Polaroid Pro1021 Dual Sim based on MT6253 is added to the list of supported MTK models.
Introduced minor improvements into the MTK module.

Other improvements:

Added auto-start of the Smart-card service.

Download Sigma Software v1.18.01

mcandre · 11-23-2012, 13:19

Direct unlock for U8680, U8730, U8800, U8860, C8860E:

Install required Huawei driver
Select "Qualcomm" platform from the tab menu in the upper left side of the software
Go to "Unlock" tab
Set the phone to Download Mode * (procedure is explained in the Download Mode manual)
Connect your device to PC with USB cable
Select "DBAdapter Reserved Interface” in the ports selection tab
Press "Unlock" button

* Set the smartphone to the Download Mode

Huawei U8680, U8730, U8800, U8860, C8860E

Switch the device OFF
Press and hold down Vol -, Vol + buttons simultaneously, then press and hold Power until your phone completely freezes on the pink screen

Now phone is in the download mode and ready for the unlocking procedure.

Source

deepakgarg · 11-23-2012, 13:43

please add mtk based alcatel android phones for direct unlock or read code via cable...as some models doesn't support codes via pid

ARAB GSM · 11-23-2012, 14:41

Please support MOTOROLA XT885 unlocking Bell provider,i Have one in hand now

Thank you

ARAB GSM · 11-23-2012, 14:41

Please support MOTOROLA XT885 unlocking Bell provider,i Have one in hand now

Thank you

toto555 · 11-23-2012, 15:05

plss add this qualcomm unit for next update.

SigmaKey 1.18.00
Sigma dongle 1.20, Initializing...OK
SigmaKey 1.18.00 Qcom: Direct unlock
ZTE Diagnostics Device (COM15), Provider: ZTE Corporation, Driver ver.: 1.2074.0.2, Date: 7/22/2010
Version: BD_MF60V1.0.0B19,
Firmware: BD_MF60V1.0.0B16
Date: May 31 2011 14:31:06, May 31 2011 14:31:06, MF60M103
IMEI: 3555720405
Bluetooth address: 000000000000
Unsupported phone model

GSM_Support · 11-23-2012, 15:41

@ toto555,

What phone model did you try to unlock exactly?

Best Regards
GSMServer team

babyelephantt · 11-23-2012, 15:58

SigmaKey 1.18.00
xxxxxxx Sigma dongle 1.20, Initializing...OK
SigmaKey 1.18.00 Qcom: Direct unlock
DBAdapter Reserved Interface (COM25), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/4/2010
Version: 76XXU-109808-USNSKQL
Unsupported phone model

..::Rizwan::.. · 11-23-2012, 16:05

Great Work Gsm Server Team Always On Top

gsm_links · 11-23-2012, 16:06

Thx for good update,pls add XT-910 as soon as possible.

Wbr

s n hasan

zenk_011 · 11-23-2012, 17:04

tnx for good update!!!

GeorgeEcuador · 11-23-2012, 17:22

Good update, please add for Huawei U7xxx...

Regards.

Team GsmServer.

abo anas zayan · 11-23-2012, 18:31

Good update Regards.

Team GsmServer.

jonathant · 11-23-2012, 18:51

Good update team, but we´re waiting still for the unlock of the Blu phones (Blu Q52 that I sent to you long time ago), I really don´t understand why the unlock process is not ready for this phone if i sent it around 2 month ago, any idea when will be ready?

dicle_gsm · 11-23-2012, 23:53

veryy good updates

BOOM UPDATE

dicle_gsm

11-23-2012, 13:06	#1 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Sigma Software v1.18.01: ZTE Blade III and a group of new Huawei smartphones added Sigma Software v1.18.01 and Sigma Firmware v1.20 More new Huawei smartphones added to the list of supported. Release Notes: Qualcomm updates: 1. Added Direct Unlock / Get Unlock Codes for the following Huawei models: U8680 / T-Mobile Ascend G312 / Phoenix / T-Mobile myTouch U8730 / Buddy / Unite Q / T-Mobile myTouch Q U8800 / Huawei Ideos X5 / MTS NEO U8800-51 / Impulse 4G U8800 Pro U8860 / Honor C8860E / Honor You can find connection procedure for the group of listed above models in the "Qualcomm manual" section. 2. Added 2 new firmware versions for Motorola EX130 Fast Direct Unlock. It means that even more firmware versions for this devices can now be unlocked in a fast way, avoiding slow heuristic method of unlocking (in case of unknown firmware version). MTK updates: Polaroid Pro1021 Dual Sim based on MT6253 is added to the list of supported MTK models. Introduced minor improvements into the MTK module. Other improvements: Added auto-start of the Smart-card service. Download Sigma Software v1.18.01 Last edited by GSM_Support; 11-26-2012 at 11:10.

11-23-2012, 13:19	#2 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Direct unlock for U8680, U8730, U8800, U8860, C8860E: Install required Huawei driver Select "Qualcomm" platform from the tab menu in the upper left side of the software Go to "Unlock" tab Set the phone to Download Mode * (procedure is explained in the Download Mode manual) Connect your device to PC with USB cable Select "DBAdapter Reserved Interface” in the ports selection tab Press "Unlock" button * Set the smartphone to the Download Mode Huawei U8680, U8730, U8800, U8860, C8860E Switch the device OFF Press and hold down Vol -, Vol + buttons simultaneously, then press and hold Power until your phone completely freezes on the pink screen Now phone is in the download mode and ready for the unlocking procedure. Source

11-23-2012, 15:58	#8 (permalink)
babyelephantt Freak Poster Join Date: Mar 2006 Location: Computerworld Posts: 456 Member: 240665 Status: Offline Thanks Meter: 94	U8665 SigmaKey 1.18.00 xxxxxxx Sigma dongle 1.20, Initializing...OK SigmaKey 1.18.00 Qcom: Direct unlock DBAdapter Reserved Interface (COM25), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/4/2010 Version: 76XXU-109808-USNSKQL Unsupported phone model

11-23-2012, 13:43	#3 (permalink)
deepakgarg No Life Poster Join Date: Jan 2006 Location: Chandigarh,India Age: 40 Posts: 5,790 Member: 220603 Status: Offline Thanks Meter: 1,164	please add mtk based alcatel android phones for direct unlock or read code via cable...as some models doesn't support codes via pid

11-23-2012, 14:41	#4 (permalink)
ARAB GSM No Life Poster Join Date: Sep 2005 Location: West Africa Ghana Age: 15 Posts: 2,256 Member: 180675 Status: Offline Sonork: 100.111161 Thanks Meter: 411	Please support MOTOROLA XT885 unlocking Bell provider,i Have one in hand now Thank you

11-23-2012, 14:41	#5 (permalink)
ARAB GSM No Life Poster Join Date: Sep 2005 Location: West Africa Ghana Age: 15 Posts: 2,256 Member: 180675 Status: Offline Sonork: 100.111161 Thanks Meter: 411	Please support MOTOROLA XT885 unlocking Bell provider,i Have one in hand now Thank you

11-23-2012, 15:05	#6 (permalink)
toto555 Freak Poster Join Date: Jun 2011 Location: P.N.G Posts: 117 Member: 1591199 Status: Offline Thanks Meter: 19	plss add this qualcomm unit for next update. SigmaKey 1.18.00 Sigma dongle 1.20, Initializing...OK SigmaKey 1.18.00 Qcom: Direct unlock ZTE Diagnostics Device (COM15), Provider: ZTE Corporation, Driver ver.: 1.2074.0.2, Date: 7/22/2010 Version: BD_MF60V1.0.0B19, Firmware: BD_MF60V1.0.0B16 Date: May 31 2011 14:31:06, May 31 2011 14:31:06, MF60M103 IMEI: 3555720405 Bluetooth address: 000000000000 Unsupported phone model

11-23-2012, 15:41	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ toto555, What phone model did you try to unlock exactly? Best Regards GSMServer team

11-23-2012, 16:05	#9 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	Great Work Gsm Server Team Always On Top

11-23-2012, 16:06	#10 (permalink)
gsm_links No Life Poster Join Date: Aug 2007 Location: India\China Posts: 1,340 Member: 561947 Status: Offline Sonork: 100.1580399 Thanks Meter: 948	Thx for good update,pls add XT-910 as soon as possible. Wbr s n hasan

11-23-2012, 17:04	#11 (permalink)
zenk_011 Freak Poster Join Date: May 2009 Location: lake lanao Posts: 346 Member: 1030567 Status: Offline Thanks Meter: 67	tnx for good update!!!

11-23-2012, 17:22	#12 (permalink)
GeorgeEcuador No Life Poster Join Date: Nov 2008 Posts: 1,052 Member: 904826 Status: Offline Sonork: 100.1603284 GeorgeEcuador Thanks Meter: 580	Good update, please add for Huawei U7xxx... Regards. Team GsmServer.

11-23-2012, 18:31	#13 (permalink)
abo anas zayan Registered User Join Date: Feb 2012 Location: swimming Posts: 1,319 Member: 1725884 Status: Offline Sonork: swimming Thanks Meter: 293	Good update Regards. Team GsmServer.

11-23-2012, 18:51	#14 (permalink)
jonathant Freak Poster Join Date: Jan 2011 Location: Dominican Republic Posts: 321 Member: 1493530 Status: Offline Thanks Meter: 36	Good update team, but we´re waiting still for the unlock of the Blu phones (Blu Q52 that I sent to you long time ago), I really don´t understand why the unlock process is not ready for this phone if i sent it around 2 month ago, any idea when will be ready?

11-23-2012, 23:53	#15 (permalink)
dicle_gsm No Life Poster Join Date: Jul 2007 Location: tr Posts: 2,219 Member: 539148 Status: Offline Thanks Meter: 2,174	veryy good updates BOOM UPDATE dicle_gsm