GSM-Forum
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   SigmaKey (https://forum.gsmhosting.com/vbb/f719/)
-   -   Sne-lx1 ”huawei usb com 1.0” (https://forum.gsmhosting.com/vbb/f719/sne-lx1-huawei-usb-com-1-0-a-2840729/)

hector bermudez 05-25-2020 23:48
Sne-lx1 ”huawei usb com 1.0”
 
kirin 710 and others is suppor now ?

ADIVASRO 05-26-2020 12:38
Sne-lx1 ”huawei usb com 1.0”
 
Hello , I have a SNE-LX1 phone and I try flash(no files) for fastboot mode but give me error...
--------- 2020-05-26 14:30:51 ---------
 SigmaKey 2.35.02 HiSi: Write firmware
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
 Sending boot.....Error writing to serial port

Sigma can revive and how exacttly can I revive him ?

solgeo 05-26-2020 12:45
Hello
Now phone dead ? Brick ?
Possible repair just via jtag + dump

Mr.Tinkertrain 05-26-2020 13:11
@ adivasro
 
Try to reflash your phone via testpoint.
But the operation will fail on your device with Kirin 710, if your phone has a locked bootloader.

Thank you for cooperation!

Best Regards
GSMServer team

Mhdharisu 05-26-2020 14:17
Sigma pls add hisilicon 710 and 980 many phones has been dead with this problem please support your *******rs around the wolrd

ADIVASRO 05-27-2020 08:33
SNE-LX1 only HUAWEI USB COM 1.0
 
Quote:
Originally Posted by GSM_Support (Post 14098239)
https://sigmakey.com/nfs/content/6149/file/header1.png
Sigma Software v2.34.08
https://sigmakey.com/nfs/content/138...-p30-sigma.jpg
<B>
HiSilicon tab
</B>
Released support for original Huawei board (factory) flash files in *.xml format.
• Now it is possible to use original files for REPAIR of bricked Huawei smartphones.
You can find manuals, drivers and testpoints here:
FACTORY MODE: phones detected as "HUAWEI USB COM 1.0"
Pack 4 is required.
Download Sigma Software v.2.35.02
http://sigmakey.com/nfs/content/6149/file/findout.png
http://sigmakey.com/nfs/content/6149/file/reachout.pnghttp://sigmakey.com/nfs/content/6149/file/twitter.pnghttp://sigmakey.com/nfs/content/6149/file/youtube.pnghttp://sigmakey.com/nfs/content/6149/file/facebook.pnghttp://sigmakey.com/nfs/content/6149/file/rss.pnghttp://sigmakey.com/nfs/content/6149/file/gplus.png
https://sigmakey.com/nfs/content/6149/file/footer1.png
SigmaKey v.2.35.02
 1120xxxxx Sigma dongle 2.35, Initializing...OK
 Pack 1: Activated
 Pack 2: Activated
 Pack 3: Activated
 Pack 4: Activated
 --------- 2020-05-26 18:01:19 ---------
 SigmaKey 2.35.02 HiSi: Write firmware
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
 Sending boot....Failed
...any solution to revive ?

ADIVASRO 05-27-2020 08:38
Quote:
Originally Posted by ADIVASRO (Post 14099267)
SigmaKey v.2.35.02
1120xxxxx Sigma dongle 2.35, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2020-05-26 18:01:19 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot....Failed
...any solution to revive ?
--------- 2020-05-26 18:11:16 ---------
 SigmaKey 2.35.02 HiSi: Write firmware
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
 Sending boot.....Error writing to serial port
GIVE ME DIFFRENT ERRORS !?

mcandre 05-27-2020 08:46
Try this:
Write original Update.app files using testpoint

ADIVASRO 05-27-2020 09:14
SNE-LX1 only HUAWEI USB COM 1.0
 
Quote:
Originally Posted by mcandre (Post 14099279)
Thank you very much for your help but I search for factory software with .xml file included for SNE-LX1 but cant fiind anywhere....can you help me with a link with factory software ? Many thanks in advance .

ADIVASRO 05-27-2020 10:52
Quote:
Originally Posted by mcandre (Post 14099279)
--------- 2020-05-27 12:50:05 ---------
 SigmaKey 2.35.02 HiSi: Load FastBoot
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Firmware: FAY-BD_1.0.0.26_Download.xml
 Model: kirin670; Phone model: SNE; Version: FAY-BD 1.0.0.26
 Sending boot....Failed

mcandre 05-27-2020 11:48
1.Open this page
2.Search for 'board'
3.Find 'SNE' among the results.

ADIVASRO 05-27-2020 12:42
Quote:
Originally Posted by mcandre (Post 14099406)
1.Open this page
2.Search for 'board'
3.Find 'SNE' among the results.
I found factory firmware....board.....but still give me error...
--------- 2020-05-27 12:50:05 ---------
SigmaKey 2.35.02 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Firmware: FAY-BD_1.0.0.26_Download.xml
Model: kirin670; Phone model: SNE; Version: FAY-BD 1.0.0.26
Sending boot....Failed

http://forum.gsmhosting.com/vbb/imag...ons/report.gif

ADIVASRO 05-28-2020 13:11
Huawei SNE-LX1 HUAWEI USB COM 1.0 only
 
SigmaKey v.2.35.02
 112xxxxxx Sigma dongle 2.35, Initializing...OK
 Pack 1: Activated
 Pack 2: Activated
 Pack 3: Activated
 Pack 4: Activated
 --------- 2020-05-28 15:07:01 ---------
 SigmaKey 2.35.02 HiSi: Write firmware
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
 Sending boot....Failed
...Sigma can or can not revive kirin 710 ??

ADIVASRO 05-28-2020 13:12
kirin 710
 
Quote:
Originally Posted by mcandre (Post 14100008)
YES.
If security version is lower than mid 2018 or if the phone has unlocked bootloader.
For new versions of Android security patch level, you can downgrade those models to previous security patch levels using Downgrade files.


Also you can flash those phone using UPGRADE mode with Sigma, no matter what security patch level present in the phone. You can use Full OTA Update or SD Upgrade files.
...how can I revive with Sigma this kirin 710 phone ?
SigmaKey v.2.35.02
 112xxxxxx Sigma dongle 2.35, Initializing...OK
 Pack 1: Activated
 Pack 2: Activated
 Pack 3: Activated
 Pack 4: Activated
 --------- 2020-05-28 15:07:01 ---------
 SigmaKey 2.35.02 HiSi: Write firmware
 HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
 Sending boot....Failed

Mr.Tinkertrain 05-28-2020 14:26
@adivasro
 
As for now we do not have a solution for this operation on this particular phone.Please wait for future updates.

Best Regards
GSMServer team


All times are GMT +1. The time now is 05:23.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.20879 seconds with 7 queries

SEO by vBSEO