Sne-lx1 ”huawei usb com 1.0”

[hector bermudez]

kirin 710 and others is suppor now ?

[ADIVASRO]

Hello , I have a SNE-LX1 phone and I try flash(no files) for fastboot mode but give me error...
--------- 2020-05-26 14:30:51 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot.....Error writing to serial port

Sigma can revive and how exacttly can I revive him ?

[solgeo]

Hello
Now phone dead ? Brick ?
Possible repair just via jtag + dump

[Mr.Tinkertrain]

Try to reflash your phone via testpoint.
But the operation will fail on your device with Kirin 710, if your phone has a locked bootloader.

Thank you for cooperation!

Best Regards
GSMServer team

[Mhdharisu]

Sigma pls add hisilicon 710 and 980 many phones has been dead with this problem please support your *******rs around the wolrd

[ADIVASRO]

Originally Posted by GSM_Support

Sigma Software v2.34.08

<B>

HiSilicon tab

</B>

Released support for original Huawei board (factory) flash files in *.xml format.

• Now it is possible to use original files for REPAIR of bricked Huawei smartphones.

You can find manuals, drivers and testpoints here:
FACTORY MODE: phones detected as "HUAWEI USB COM 1.0"

Pack 4 is required.

Download Sigma Software v.2.35.02

SigmaKey v.2.35.02
1120xxxxx Sigma dongle 2.35, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2020-05-26 18:01:19 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot....Failed
...any solution to revive ?

[ADIVASRO]

Originally Posted by ADIVASRO

SigmaKey v.2.35.02
1120xxxxx Sigma dongle 2.35, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2020-05-26 18:01:19 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot....Failed
...any solution to revive ?

--------- 2020-05-26 18:11:16 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot.....Error writing to serial port

GIVE ME DIFFRENT ERRORS !?

[mcandre]

Try this:
Write original Update.app files using testpoint

[ADIVASRO]

Originally Posted by mcandre

Try this:
Write original Update.app files using testpoint

Thank you very much for your help but I search for factory software with .xml file included for SNE-LX1 but cant fiind anywhere....can you help me with a link with factory software ? Many thanks in advance .

[ADIVASRO]

Originally Posted by mcandre

Try this:
Write original Update.app files using testpoint

--------- 2020-05-27 12:50:05 ---------
SigmaKey 2.35.02 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Firmware: FAY-BD_1.0.0.26_Download.xml
Model: kirin670; Phone model: SNE; Version: FAY-BD 1.0.0.26
Sending boot....Failed

[mcandre]

1.Open this page
2.Search for 'board'
3.Find 'SNE' among the results.

[ADIVASRO]

Originally Posted by mcandre

1.Open this page
2.Search for 'board'
3.Find 'SNE' among the results.

I found factory firmware....board.....but still give me error...
--------- 2020-05-27 12:50:05 ---------
SigmaKey 2.35.02 HiSi: Load FastBoot
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Firmware: FAY-BD_1.0.0.26_Download.xml
Model: kirin670; Phone model: SNE; Version: FAY-BD 1.0.0.26
Sending boot....Failed

[ADIVASRO]

SigmaKey v.2.35.02
112xxxxxx Sigma dongle 2.35, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2020-05-28 15:07:01 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot....Failed
...Sigma can or can not revive kirin 710 ??

[ADIVASRO]

Originally Posted by mcandre

YES.
If security version is lower than mid 2018 or if the phone has unlocked bootloader.
For new versions of Android security patch level, you can downgrade those models to previous security patch levels using Downgrade files.


Also you can flash those phone using UPGRADE mode with Sigma, no matter what security patch level present in the phone. You can use Full OTA Update or SD Upgrade files.

...how can I revive with Sigma this kirin 710 phone ?
SigmaKey v.2.35.02
112xxxxxx Sigma dongle 2.35, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2020-05-28 15:07:01 ---------
SigmaKey 2.35.02 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM330), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 10.08.2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...FAY-BD 1.0.0.20.skf
Sending boot....Failed

[Mr.Tinkertrain]

As for now we do not have a solution for this operation on this particular phone.Please wait for future updates.

Best Regards
GSMServer team