Sony C2005 change imei OK - GSM-Forum

cemalefendi · 07-22-2015, 10:09

* daemon started successfully *
^ ROMaster Composite ADB Interface
Version: Linux version 3.4.0 (user@si-buildpc-01) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 22 01:12:16 CST 2013
Phone model: Sony C2005
Android 4.2.2; Firmware: 15.2.A.1.12; Date: Thu Aug 22 01:07:42 CST 2013
Version: 15.2.A.1.12
Baseband Processor: QCT MSM8627 MTP
Software IMEI: 358097058742697
Activated, Service: NO
Preparing....Not found
, bad blocks: 5

GSM_Support · 07-22-2015, 12:27

@ cemale*****,

According to the log file you have posted, more likely that the connection between phone and software is not stable.
Please make sure that:

You use the latest version of Sigma software
Battery is fully charged
All the side programs, that may interfere with the phone, are closed
Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
Connect phone to USB port placed on the backside of PC (motherboard's USB port)
Do not connect or disconnect other USB cables into the PC during the actual work with the phone
Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
Phone has stock (factory) firmware version
SIM card is removed
After that repeat operation once again

Best Regards
GSMServer team

cemalefendi · 07-23-2015, 12:22

on new version

same cable same usb port same phone. now can change.

mcandre · 07-23-2015, 12:27

cemale*****, did you unlock this phone? Show the log.

shohelie · 07-23-2015, 12:55

You use the latest version of Sigma software
Battery is fully charged
All the side programs, that may interfere with the phone, are closed
Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed
Connect phone to USB port placed on the backside of PC (motherboard's USB port)
Do not connect or disconnect other USB cables into the PC during the actual work with the phone
Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available.
Phone has stock (factory) firmware version
SIM card is removed
After that repeat operation once again

cemalefendi · 08-03-2015, 09:31

already problem solved with last version.

07-22-2015, 10:09	#1 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 768 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 159	Sony C2005 change imei OK * daemon started successfully * ^ ROMaster Composite ADB Interface Version: Linux version 3.4.0 (user@si-buildpc-01) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 22 01:12:16 CST 2013 Phone model: Sony C2005 Android 4.2.2; Firmware: 15.2.A.1.12; Date: Thu Aug 22 01:07:42 CST 2013 Version: 15.2.A.1.12 Baseband Processor: QCT MSM8627 MTP Software IMEI: 358097058742697 Activated, Service: NO Preparing....Not found , bad blocks: 5 Last edited by Gsmserver; 08-06-2015 at 10:19.

07-22-2015, 12:27	#2 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ cemale*****, According to the log file you have posted, more likely that the connection between phone and software is not stable. Please make sure that: You use the latest version of Sigma software Battery is fully charged All the side programs, that may interfere with the phone, are closed Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed Connect phone to USB port placed on the backside of PC (motherboard's USB port) Do not connect or disconnect other USB cables into the PC during the actual work with the phone Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available. Phone has stock (factory) firmware version SIM card is removed After that repeat operation once again Best Regards GSMServer team

07-23-2015, 12:22	#3 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 768 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 159	on new version same cable same usb port same phone. now can change.

07-23-2015, 12:27	#4 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	cemale*****, did you unlock this phone? Show the log.

07-23-2015, 12:55	#5 (permalink)
shohelie Crazy Poster Join Date: Mar 2010 Posts: 52 Member: 1264220 Status: Offline Thanks Meter: 8	You use the latest version of Sigma software Battery is fully charged All the side programs, that may interfere with the phone, are closed Phone’s cable and device itself should not be disconnected or disturbed until the procedure is fully completed Connect phone to USB port placed on the backside of PC (motherboard's USB port) Do not connect or disconnect other USB cables into the PC during the actual work with the phone Avoid using any kind of USB HUBs and long USB cables. Use the shortest-length USB cable available. Phone has stock (factory) firmware version SIM card is removed After that repeat operation once again

08-03-2015, 09:31	#6 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 768 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 159	already problem solved with last version.