unable to type yes [solved] - GSM-Forum

al-zenjibary · 02-06-2025, 15:16

i have huawei p40 lite.
i want to factory reset with sigmakey be cause i cant types yes on recovery mode.

Gsmserver · 02-06-2025, 15:35

You can connect a mouse using OTG adapter and use it to navigate:

Get an OTG adapter (USB-C to USB-A).
Connect a USB mouse to your phone via the OTG adapter.
Reboot into recovery mode (Power + Volume Up).
Use the mouse to select "Factory Reset" and confirm by clicking "Yes."

al-zenjibary · 02-06-2025, 15:46

Quote:

Originally Posted by Gsmserver

You can connect a mouse using OTG adapter and use it to navigate:

Get an OTG adapter (USB-C to USB-A).
Connect a USB mouse to your phone via the OTG adapter.
Reboot into recovery mode (Power + Volume Up).
Use the mouse to select "Factory Reset" and confirm by clicking "Yes."

i tried with mouse through OTG but unlucky does not work for me

The mouse don't work on keyboard only work on factory reset and back.

Gsmserver · 02-06-2025, 16:17

If USB debugging is enabled, try factory reset via ADB:

adb devices
adb reboot recovery
adb shell input text yes
adb shell input keyevent 66

In general case, you can perform Remove ID operation with Sigma. It should perform factory reset in the end of the service operation.

al-zenjibary · 02-06-2025, 16:27

done for this process

unlock frp via test point after finish dont remove cable from phone. after few second remove again frp. the phone will restart and wipe everything.

here is the log

2.0.6.725, Date: 8/9/2014, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 810
Phone model: JNY-LX1
Version: JNY-L21 12.0.0.286(C185E5R4P2)
Removing FRP lock...Done
--------- 2025-02-06 07:10:45 ---------
SigmaPlus 1.00.06 HiSi: Remove FRP
Phone model: JNY-LX1
Version: JNY-L21 12.0.0.286(C185E5R4P2)
Removing FRP lock...Done

02-06-2025, 15:16	#1 (permalink)
al-zenjibary Crazy Poster Join Date: Sep 2006 Location: EARTH Posts: 50 Member: 342126 Status: Offline Thanks Meter: 29	unable to type yes [solved] i have huawei p40 lite. i want to factory reset with sigmakey be cause i cant types yes on recovery mode.

02-06-2025, 15:35	#2 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,462 Member: 21077 Status: Offline Thanks Meter: 117,357	You can connect a mouse using OTG adapter and use it to navigate: Get an OTG adapter (USB-C to USB-A). Connect a USB mouse to your phone via the OTG adapter. Reboot into recovery mode (Power + Volume Up). Use the mouse to select "Factory Reset" and confirm by clicking "Yes."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-06-2025, 16:17	#4 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,462 Member: 21077 Status: Offline Thanks Meter: 117,357	If USB debugging is enabled, try factory reset via ADB: adb devices adb reboot recovery adb shell input text yes adb shell input keyevent 66 In general case, you can perform Remove ID operation with Sigma. It should perform factory reset in the end of the service operation.

02-06-2025, 16:27	#5 (permalink)
al-zenjibary Crazy Poster Join Date: Sep 2006 Location: EARTH Posts: 50 Member: 342126 Status: Offline Thanks Meter: 29	done for this process unlock frp via test point after finish dont remove cable from phone. after few second remove again frp. the phone will restart and wipe everything. here is the log 2.0.6.725, Date: 8/9/2014, USB\VID_12D1&PID_3609&REV_0100 HiSilicon: Kirin 810 Phone model: JNY-LX1 Version: JNY-L21 12.0.0.286(C185E5R4P2) Removing FRP lock...Done --------- 2025-02-06 07:10:45 --------- SigmaPlus 1.00.06 HiSi: Remove FRP Phone model: JNY-LX1 Version: JNY-L21 12.0.0.286(C185E5R4P2) Removing FRP lock...Done