GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   SigmaKey (https://forum.gsmhosting.com/vbb/f719/)
-   -   What phones/features do you want us to add to the SigmaKey? (https://forum.gsmhosting.com/vbb/f719/what-phones-features-do-you-want-us-add-sigmakey-1538192/)

GSM_Support 01-10-2013 08:34

@ cerja,

As it is signed at the official web site:
Quote:

Direct unlock
  1. Select "Qualcomm" platform from the tab menu in upper left side of the software
  2. Go to "Unlock" tab
  3. Install required Android USB Driver Installer (only if the phone is connected for the first time)
  4. Set the phone to "FTM" mode
  5. Connect the phone to PC with USB cable
  6. Select ZTE Handset Diagnostic Interface in the ports selection tab
  7. Press "Unlock" button

Link for the required drivers available in the unlock manual.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

cerja 01-10-2013 15:50

sir, I follow the steps that are on page sigma, but the software did not make the port "Select ZTE Handset Diagnostic Interface tab selection in the ports," I'm doing everything it says the page, but not connected phone

cerja 01-10-2013 16:02

sir, do this sequence, volume up - volume down - power, and I make an puero connect communications and do the repair for out error, thus creates a com port no rest, this is the boot software error sigma, "18/01/07 SigmaKey Qcom: Repair IMEI
FTM over Android (COM106) Provider: Qualcomm Incorporated, Driver ver.: 2.0.5.3, Date: 28/07/2010
Memory stream error ", could you help me with this error

GSM_Support 01-10-2013 17:17

@ cerja,

Please make a screenshot of the device manager and post it here.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

cerja 01-10-2013 21:22

sir, using sequence, volume up - volume down - power, creates a COM port, but throws error when given the repair


http://i45.tinypic.com/fy0uar.jpg


http://i45.tinypic.com/672k95.jpg


using sequence, Volume Down - Camera - power, does not create any COM port

[IMG]http://i50.tinypic.com/34yv2oz.jpg[/IMG]

wellinton cell 01-10-2013 22:07

unlock alcatel 890a y reparación de imei

thienglong-tv19 01-11-2013 10:19

please sigmabox add zte v768 concord unlock
 
please add zte v768 concord unlock

gorgans 01-13-2013 12:57

please add support for alcatel OT-871

GSM_Support 01-14-2013 08:01

@ tabletfirmware,

MB511 is not supported phone model, at the moment.
Please follow this link to check list of all supported phone brands and models.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

tabletfirmware 01-14-2013 08:26

what box support free?

kommurik99 01-14-2013 09:35

motorola mb 511 need
 
dear friends
please help me i have Motorola mb511 how can i update android 2.1 into 2.2

GSM_Support 01-14-2013 10:04

@ murad6229,

Huawei C2610 is not currently supported phone model, by SigmaKey.
All supported phone models can be found here.

Best Regards
GSMServer team



http://www.smart-clip.com/img/sigma_userbar.png

bvj 01-14-2013 17:18

Can you add ot-992 unlock ?

And update id for alcatel calculation ?

regards .

MartechSolution 01-14-2013 17:32

waiting for c8812 tnx..

tabletfirmware 01-15-2013 09:34

w230 unlock
 
help me for unlock???????


All times are GMT +1. The time now is 01:07.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.17395 seconds with 6 queries

SEO by vBSEO