GALAXY S III TXL E7 SPD (6803) After Change IMEI Phone is Dead - GSM-Forum

Arshu007 · 09-29-2012, 09:11

GALAXY S III TXL E7 SPD (6803) After Change IMEI Phone is Dead

Here is The Read Info :

Gnd: 9
Analyzing D+ and D-...
D+ = 5, D- = 6
Analyzing USB device, please wait...
Find USB deviceCI USB2Serial (COM14), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:[68030000]
Flash ID: 009800D1
FLASH LEN:0x8000000
--------------------------------------.
Phone imei lists.
IMEI1:352506021787635
IMEI2:352504130097640
IMEI3:358570010103893

Read Info finish.

>>Succeeded!

I Write to Backup But Phone Not Power On

How to Solve My Problem ....

Arshu007 · 10-01-2012, 07:31

How to Solve My Problem

murari-GSM · 10-02-2012, 03:50

Bro
trai format or reset not done
trai write another working same mobile flash file

murari-GSM

alkim · 10-02-2012, 04:12

bro try this procedure first read unit with using supply cable of box if he read the phone proceed to this pullout the supply cable and use power regulator and change your imie again in my experience our box is not giving stable supply that is the caused of dead unit

abodeuf · 03-21-2013, 19:33

plz i need this flash or nv file

abodeuf · 03-23-2013, 19:19

plz i need this flash or nv file

RCB Telecom · 03-23-2013, 19:26

b4 you change emei back up the phone first just in case.................

09-29-2012, 09:11	#1 (permalink)
Arshu007 No Life Poster Join Date: Dec 2010 Location: ..:: GSM-Forum ::.. Posts: 840 Member: 1476028 Status: Offline Sonork: 100.1625985 Thanks Meter: 114	GALAXY S III TXL E7 SPD (6803) After Change IMEI Phone is Dead GALAXY S III TXL E7 SPD (6803) After Change IMEI Phone is Dead Here is The Read Info : Gnd: 9 Analyzing D+ and D-... D+ = 5, D- = 6 Analyzing USB device, please wait... Find USB deviceCI USB2Serial (COM14), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:[68030000] Flash ID: 009800D1 FLASH LEN:0x8000000 --------------------------------------. Phone imei lists. IMEI1:352506021787635 IMEI2:352504130097640 IMEI3:358570010103893 Read Info finish. >>Succeeded! I Write to Backup But Phone Not Power On How to Solve My Problem ....

10-01-2012, 07:31	#2 (permalink)
Arshu007 No Life Poster Join Date: Dec 2010 Location: ..:: GSM-Forum ::.. Posts: 840 Member: 1476028 Status: Offline Sonork: 100.1625985 Thanks Meter: 114	How to Solve My Problem

10-02-2012, 03:50	#3 (permalink)
murari-GSM No Life Poster Join Date: Mar 2011 Location: India Posts: 989 Member: 1538128 Status: Offline Sonork: 100.1613105 Thanks Meter: 199	Bro trai format or reset not done trai write another working same mobile flash file murari-GSM

10-02-2012, 04:12	#4 (permalink)
alkim No Life Poster Join Date: Mar 2009 Location: earth Posts: 1,430 Member: 992568 Status: Offline Sonork: kulit Thanks Meter: 231	bro try this procedure first read unit with using supply cable of box if he read the phone proceed to this pullout the supply cable and use power regulator and change your imie again in my experience our box is not giving stable supply that is the caused of dead unit

03-21-2013, 19:33	#5 (permalink)
abodeuf Junior Member Join Date: Mar 2009 Posts: 23 Member: 993652 Status: Offline Thanks Meter: 3	plz i need this flash or nv file

03-23-2013, 19:19	#6 (permalink)
abodeuf Junior Member Join Date: Mar 2009 Posts: 23 Member: 993652 Status: Offline Thanks Meter: 3	plz i need this flash or nv file

03-23-2013, 19:26	#7 (permalink)
RCB Telecom Registered User Join Date: Feb 2009 Location: Craiova(Romania) Age: 18 Posts: 597 Member: 972420 Status: Offline Sonork: manole Thanks Meter: 134	b4 you change emei back up the phone first just in case.................