Doogee X30 Frp remove problem [ANSWERED] - GSM-Forum

cehajic · 11-01-2017, 09:44

Hello Volcano team,

I need your help.. Cannot remove frp from this phone..

Always stuck at Boot downloading complete! Tried on several pc's.

I use last version software..

Code:

>>Current Task:
          USB Clear FRP(EMMC)
>>
>>Operation:
          1. Power off the phone.
          2. Please insert USB cable within 40 seconds.
>> 
>>MediaTek PreLoader USB VCOM (Android) (COM91)
>> 
>>Connecting...
>>CPU TYPE:MT6580
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x01000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!

Bell666 · 11-01-2017, 10:14

You need the DA (Download Agent) boot file for this phone.

cehajic · 11-01-2017, 10:33

Quote:

Originally Posted by Bell666

You need the DA (Download Agent) boot file for this phone.

Thank you for your answer..

Can you please provide me more information, where to find (download) it ?

Regards

Bell666 · 11-01-2017, 20:38

The DA file is in the factory firmware package. But the factory firmware is difficult to get. Same hardware but different names for different countries. I found that Q Mobile Metal DA file is the same as Q Plus Neno. I have never seen a Q Mobile but here is SA we have Q Plus phones. Same hardware different name.

kamal_singla · 11-02-2017, 10:21

Quote:

Originally Posted by cehajic

Hello Volcano team,

I need your help.. Cannot remove frp from this phone..

Always stuck at Boot downloading complete! Tried on several pc's.

I use last version software..

Code:

>>Current Task:
          USB Clear FRP(EMMC)
>>
>>Operation:
          1. Power off the phone.
          2. Please insert USB cable within 40 seconds.
>> 
>>MediaTek PreLoader USB VCOM (Android) (COM91)
>> 
>>Connecting...
>>CPU TYPE:MT6580
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x01000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!

hi
Download Latest SP tool and use these DA's post result

samb-nd-ct · 02-12-2018, 22:18

use Octoplus FRP Tool

Welcome to Octoplus FRP Tool v.1.1.3
Platform: BLACKVIEW
Selected model: A7
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.05082105.3CBD6443
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: DOOGEE
Model: X30
Device: X30
Platform: mt6580
Android version: 7.0
Display ID: DOOGEE-X30-Android7.0-20170817
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLACKVIEW_A7_12-02-2018_21-58-37.dump file
Performed by 1.1.3 Software version.

ramadanemini · 05-14-2018, 15:01

Welcome to Octoplus FRP Tool v.1.2.5
Platform: BLACKVIEW
Selected model: A7
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.05075300.10719203
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: DOOGEE
Model: X30
Device: X30
Platform: mt6580
Android version: 7.0
Display ID: DOOGEE-X30-Android7.0-20171025
Searching for signatures...
FRP signature not found!
Backup saved as BLACKVIEW_A7_14-05-2018_15-58-44.dump file
Performed by 1.2.5.0 Software version.

Platform: DOOGEE
Selected model: X30
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.05075300.10719203
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: DOOGEE
Model: X30
Device: X30
Platform: mt6580
Android version: 7.0
Display ID: DOOGEE-X30-Android7.0-20171025
Searching for signatures...
FRP signature not found!
Backup saved as DOOGEE_X30_14-05-2018_16-00-45.dump file
Performed by 1.2.5.0 Software version.

11-01-2017, 09:44	#1 (permalink)
cehajic Insane Poster Join Date: Feb 2014 Posts: 97 Member: 2125344 Status: Offline Thanks Meter: 29	Doogee X30 Frp remove problem [ANSWERED] Hello Volcano team, I need your help.. Cannot remove frp from this phone.. Always stuck at Boot downloading complete! Tried on several pc's. I use last version software.. Code: >>Current Task: USB Clear FRP(EMMC) >> >>Operation: 1. Power off the phone. 2. Please insert USB cable within 40 seconds. >> >>MediaTek PreLoader USB VCOM (Android) (COM91) >> >>Connecting... >>CPU TYPE:MT6580 >>Hardware version:CA00 >>Software version:0000 >>SecCfgVal :0x01000000 >>BromVersion :0xFF >>BLVersion :0x01 >>Boot downloading complete!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-01-2017, 10:14	#2 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	You need the DA (Download Agent) boot file for this phone.

11-01-2017, 20:38	#4 (permalink)
Bell666 No Life Poster Join Date: Feb 2012 Posts: 762 Member: 1718440 Status: Offline Thanks Meter: 620	The DA file is in the factory firmware package. But the factory firmware is difficult to get. Same hardware but different names for different countries. I found that Q Mobile Metal DA file is the same as Q Plus Neno. I have never seen a Q Mobile but here is SA we have Q Plus phones. Same hardware different name.

02-12-2018, 22:18	#6 (permalink)
samb-nd-ct No Life Poster Join Date: Jun 2006 Location: italia Posts: 512 Member: 289229 Status: Offline Sonork: samb-nd-ct Thanks Meter: 195	use Octoplus FRP Tool Welcome to Octoplus FRP Tool v.1.1.3 Platform: BLACKVIEW Selected model: A7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM5 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.41473265.05082105.3CBD6443 eMMC Flash: Hynix: HAG2e DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15032 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: DOOGEE Model: X30 Device: X30 Platform: mt6580 Android version: 7.0 Display ID: DOOGEE-X30-Android7.0-20170817 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BLACKVIEW_A7_12-02-2018_21-58-37.dump file Performed by 1.1.3 Software version.

05-14-2018, 15:01	#7 (permalink)
ramadanemini Insane Poster Join Date: May 2010 Location: ruma Age: 53 Posts: 84 Member: 1297878 Status: Offline Thanks Meter: 16	Welcome to Octoplus FRP Tool v.1.2.5 Platform: BLACKVIEW Selected model: A7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM7 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.41473265.05075300.10719203 eMMC Flash: Hynix: HAG2e DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15032 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: DOOGEE Model: X30 Device: X30 Platform: mt6580 Android version: 7.0 Display ID: DOOGEE-X30-Android7.0-20171025 Searching for signatures... FRP signature not found! Backup saved as BLACKVIEW_A7_14-05-2018_15-58-44.dump file Performed by 1.2.5.0 Software version. Platform: DOOGEE Selected model: X30 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM7 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.41473265.05075300.10719203 eMMC Flash: Hynix: HAG2e DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15032 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: DOOGEE Model: X30 Device: X30 Platform: mt6580 Android version: 7.0 Display ID: DOOGEE-X30-Android7.0-20171025 Searching for signatures... FRP signature not found! Backup saved as DOOGEE_X30_14-05-2018_16-00-45.dump file Performed by 1.2.5.0 Software version.