E1282T Original Samsung Flash and code Successfully readed by VOLCANO - Page 3 - GSM-Forum

vel mobiles · 07-28-2014, 06:36

E1282T read flash error with volcano

Detecting D+ and D-...
Vcc: null
Gnd: 5
Detection initiated...
Found: D+ = 3, D- = 2
Detection D+/D- with 3.50 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)
Pinout setting complete.
SPD U Disk Error Flash files password is = VolcanoAheadOfAllEVER
Reset USB device and search it...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
OR_RSP(0x97) func:_FDL_HWInit, line:4
Please put the baud set 115200, try again.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

I already reduce baud rate but show the same error...

pls help ...... I'm using v2.7.2

NKhan_Gsm · 08-06-2014, 06:11

Quote:

Originally Posted by vel mobiles

E1282T read flash error with volcano

Detecting D+ and D-...
Vcc: null
Gnd: 5
Detection initiated...
Found: D+ = 3, D- = 2
Detection D+/D- with 3.50 seconds!
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)
Pinout setting complete.
SPD U Disk Error Flash files password is = VolcanoAheadOfAllEVER
Reset USB device and search it...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
OR_RSP(0x97) func:_FDL_HWInit, line:4
Please put the baud set 115200, try again.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

I already reduce baud rate but show the same error...

pls help ...... I'm using v2.7.2

I also faced same problem in new versions I think new versions has bugs use olde versions .

WBR

NKhan_Gsm · 08-06-2014, 06:14

Quote:

Originally Posted by renginokia

how to read usb cable or volcano jig

During detect it by Volcano you keep Menu button pressed and also when you want to connect it via USB keep Menu button pressed and connect your phone to PC .

WBR

NKhan_Gsm · 08-06-2014, 06:16

Quote:

Originally Posted by renginokia

how to solve this problem

PIN LOCK problem

It has been explained in post :

4_Now tick on Unlock code and select read file and run 2 time and you will see your E1282T user code but dont forget to press RUN towice

..:::GSM CLUB™:::.. · 08-10-2014, 06:46

How to install driver ?
I try another way but not solve

NKhan_Gsm · 08-10-2014, 07:11

Quote:

Originally Posted by ..:::GSM CLUB™:::..

How to install driver ?
I try another way but not solve

Install phone drivers from C:\VocanoBox\Drivers\Phone Drivers\Spd

..:::GSM CLUB™:::.. · 08-10-2014, 07:38

Quote:

Originally Posted by NKhan_Gsm

Install phone drivers from C:\VocanoBox\Drivers\Phone Drivers\Spd

Thanks for reply
but not solve

..:::GSM CLUB™:::.. · 08-10-2014, 07:43

Driver allready install but when connect set with boot key then massage

NKhan_Gsm · 08-10-2014, 14:04

Quote:

Originally Posted by ..:::GSM CLUB™:::..

Driver allready install but when connect set with boot key then massage

Once uninstall drivers by Uninstall MS-DOS Batch file which is located in C:\VocanoBox\Drivers\Phone Drivers\Spd and than restart PC and when you again connected the phone it will ask for drivers now install it from C:\VocanoBox\Drivers\Phone Drivers\Spd or before connecting install drivers by clicking on install MS-DOS Batch file from
C:\VocanoBox\Drivers\Phone Drivers\Spd

renginokia · 08-13-2014, 05:16

not working am tried in many days

NKhan_Gsm · 08-13-2014, 08:32

Maybe you don't read the post carefully for all others it work and for you it don't it is strange .

deen.pandybazar · 08-22-2014, 08:43

valcano is injuros for health

yuganta · 08-28-2014, 09:03

phone detected but unable to read file

Stona · 08-29-2014, 05:03

so connect phone i use volcano cable and use jig that fits in phone. must phone be switched off and battery inside? i have the 1205y.

DEEPUKRB · 08-29-2014, 06:33

Now volcvano box west of mony and time i try 15 time in diffrent version but samsyang e1280t always says change baudrate when i change than agin say change baudrate but world first mirecal box full read write and user code done also dragon box dad after format set and read wrong user code but awesome mirecal box i thoru my volcvano box in dustbin. Thanks volcano team for your world best poor service

08-10-2014, 06:46	#35 (permalink)
..:::GSM CLUB™:::.. No Life Poster Join Date: Sep 2008 Location: Bd,Dhaka,GSM CLUB Age: 38 Posts: 1,002 Member: 859030 Status: Offline Sonork: 100.1619336 Thanks Meter: 435	samsung e1282t driver problem by win 7 How to install driver ? I try another way but not solve

07-28-2014, 06:36	#31 (permalink)
vel mobiles Junior Member Join Date: Jan 2014 Posts: 3 Member: 2098780 Status: Offline Thanks Meter: 0	E1282T read flash error with volcano Detecting D+ and D-... Vcc: null Gnd: 5 Detection initiated... Found: D+ = 3, D- = 2 Detection D+/D- with 3.50 seconds! Analyzing USB device, please wait... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Detection completed. Setting pinouts... Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00) Pinout setting complete. SPD U Disk Error Flash files password is = VolcanoAheadOfAllEVER Reset USB device and search it... Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... OR_RSP(0x97) func:_FDL_HWInit, line:4 Please put the baud set 115200, try again. >>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. I already reduce baud rate but show the same error... pls help ...... I'm using v2.7.2

08-10-2014, 07:43	#38 (permalink)
..:::GSM CLUB™:::.. No Life Poster Join Date: Sep 2008 Location: Bd,Dhaka,GSM CLUB Age: 38 Posts: 1,002 Member: 859030 Status: Offline Sonork: 100.1619336 Thanks Meter: 435	Driver allready install but when connect set with boot key then massage

08-13-2014, 05:16	#40 (permalink)
renginokia No Life Poster Join Date: Sep 2010 Location: KERALA,INDIA Posts: 715 Member: 1392433 Status: Offline Sonork: 100.1650669 Thanks Meter: 90	not working am tried in many days

08-13-2014, 08:32	#41 (permalink)
NKhan_Gsm No Life Poster Join Date: Aug 2011 Location: Afghanistan Posts: 1,758 Member: 1646177 Status: Offline Sonork: 100.1604654 Thanks Meter: 369	Maybe you don't read the post carefully for all others it work and for you it don't it is strange .

08-22-2014, 08:43	#42 (permalink)
deen.pandybazar Insane Poster Join Date: Apr 2013 Location: tamilnadu,madurai Posts: 80 Member: 1916112 Status: Offline Sonork: [email protected] Thanks Meter: 8	valcano is injuros for health

08-28-2014, 09:03	#43 (permalink)
yuganta Freak Poster Join Date: May 2009 Location: Morigaon (ASSAM) INDIA Posts: 215 Member: 1030555 Status: Offline Sonork: ******** Thanks Meter: 26	phone detected but unable to read file

08-29-2014, 05:03	#44 (permalink)
Stona Freak Poster Join Date: Oct 2007 Location: Namibia Posts: 110 Member: 619878 Status: Offline Thanks Meter: 5	so connect phone i use volcano cable and use jig that fits in phone. must phone be switched off and battery inside? i have the 1205y.

08-29-2014, 06:33	#45 (permalink)
DEEPUKRB Insane Poster Join Date: Jun 2014 Posts: 72 Member: 2212311 Status: Offline Sonork: ROOPKRB Thanks Meter: 9	Now volcvano box west of mony and time i try 15 time in diffrent version but samsyang e1280t always says change baudrate when i change than agin say change baudrate but world first mirecal box full read write and user code done also dragon box dad after format set and read wrong user code but awesome mirecal box i thoru my volcvano box in dustbin. Thanks volcano team for your world best poor service