Droidz Easy CPU TYPE:MT6572 - GSM-Forum

smasher-x · 01-17-2015, 07:26

Master of Volcano please help me with phone. Problem was code, what I did was back up first the BIN file then I format it according the start and format length readed by VOLCANO. It was formatted successfully but the unit was stock on logo. So I google a scatter file and found it then I flash it but it shows error and stop flashing. So I tried to power it on and found unit has not powering. So I get back to valcano and planning to flash back my previous back up and below was the log of volcano

Volcano Updated: 2014-11-27
Connecting...
Connection successful,connected state!
Version: V3.8
SN:289-803-262
Port:COM86
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM2 COM9 COM10 COM86
Current Port:COM86
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
No good work mobile phone.
>>Boot downloading complete!

My question how can I flash it back again to my previous back up?
please let me know how.......thanks

chandanps18 · 01-17-2015, 07:55

It would be better if u could post screenshot rather than the logs, here the members can easily check the Volcano version, boot election type, baudrate....etc..

Post Phone Model, CPU Details......
Anyway, do the followings.

1 Write the backup file to the phone (Better to use Built in boot 14).
2 Always use latest version of volcano, i.e currently 2.9.1.
3 First write backup and then format it using the android tool/MTK tab.
4 U can also use Android tool to format ur phone.

Post result with screenshot.

BR
Chandan

smasher-x · 01-18-2015, 04:18

Thanks for the reply and figure it out how to flash back my back up...Unit was now running smoothly.

smasher-x · 01-18-2015, 04:18

Thanks for the reply and figure it out how to flash back my back up...Unit was now running smoothly.

chandanps18 · 01-21-2015, 14:11

Good to see ur problem is solved....

Now this thread must be closed by any of the product supporter...

Br
Chandan

01-17-2015, 07:26	#1 (permalink)
smasher-x Freak Poster Join Date: Dec 2004 Location: Philippines Posts: 136 Member: 100065 Status: Offline Thanks Meter: 39	Droidz Easy CPU TYPE:MT6572 Master of Volcano please help me with phone. Problem was code, what I did was back up first the BIN file then I format it according the start and format length readed by VOLCANO. It was formatted successfully but the unit was stock on logo. So I google a scatter file and found it then I flash it but it shows error and stop flashing. So I tried to power it on and found unit has not powering. So I get back to valcano and planning to flash back my previous back up and below was the log of volcano Volcano Updated: 2014-11-27 Connecting... Connection successful,connected state! Version: V3.8 SN:289-803-262 Port:COM86 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM1 COM2 COM9 COM10 COM86 Current Port:COM86 Analysis of USB port,Please insert phone USB cable. Connecting... CPU TYPE:MT6572 Hardware version:CA01 Software version:0000 No good work mobile phone. >>Boot downloading complete! My question how can I flash it back again to my previous back up? please let me know how.......thanks

01-17-2015, 07:55	#2 (permalink)
chandanps18 No Life Poster Join Date: Dec 2013 Location: India Posts: 1,893 Member: 2082450 Status: Offline Thanks Meter: 1,454	Help is here It would be better if u could post screenshot rather than the logs, here the members can easily check the Volcano version, boot election type, baudrate....etc.. Post Phone Model, CPU Details...... Anyway, do the followings. 1 Write the backup file to the phone (Better to use Built in boot 14). 2 Always use latest version of volcano, i.e currently 2.9.1. 3 First write backup and then format it using the android tool/MTK tab. 4 U can also use Android tool to format ur phone. Post result with screenshot. BR Chandan

01-18-2015, 04:18	#3 (permalink)
smasher-x Freak Poster Join Date: Dec 2004 Location: Philippines Posts: 136 Member: 100065 Status: Offline Thanks Meter: 39	Thanks for the reply and figure it out how to flash back my back up...Unit was now running smoothly.

01-18-2015, 04:18	#4 (permalink)
smasher-x Freak Poster Join Date: Dec 2004 Location: Philippines Posts: 136 Member: 100065 Status: Offline Thanks Meter: 39	Thanks for the reply and figure it out how to flash back my back up...Unit was now running smoothly.

01-21-2015, 14:11	#5 (permalink)
chandanps18 No Life Poster Join Date: Dec 2013 Location: India Posts: 1,893 Member: 2082450 Status: Offline Thanks Meter: 1,454	Good to see ur problem is solved.... Now this thread must be closed by any of the product supporter... Br Chandan