GSM-Forum - Merapi tool:iBall andi 107 Nand MT6575 Read flash,format and split flash done

Merapi tool
iBall andi 107
Nand MT6575
Read flash,format
and split flash done.
Without any Risk. :D

Here is screen shot.

Read flash:

http://s1.postimg.org/4xmzgu31b/andi_107.png

Format withou any risk:

http://s28.postimg.org/va1nw9rx9/andi_107_3.png

here is logs of format

Code:

>>Analysis of USB port,Please insert phone USB cable. 17:50:18 > Connecting... 17:50:18 > CPU TYPE:MT6575 17:50:18 > Hardware version:CB00 17:50:18 > Software version:E201 17:50:19 > SecCfgVal :0x00000000 17:50:19 > BromVersion :0x05 17:50:19 > BLVersion :0xFE >>Boot downloading complete! 17:50:30 > FlashID:00AD00BC00900055 17:50:30 > Flash Type: NAND_H8BCS0UN0MCR 17:50:30 > FlashLen:20000000 17:50:30 > 17:50:30 > Analysis of USB port... 17:50:33 > 17:50:33 > 17:50:33 > Analysis of system files... 17:50:33 > PRELOADER:>>addr:0x000000 --length:0x040000 17:50:33 > DSP_BL:>>addr:0x040000 --length:0x0C0000 17:50:33 > __NODL_NVRAM:>>addr:0x100000 --length:0x300000 17:50:33 > __NODL_SECCFG:>>addr:0x400000 --length:0x020000 17:50:33 > UBOOT:>>addr:0x420000 --length:0x060000 17:50:33 > BOOTIMG:>>addr:0x480000 --length:0x500000 17:50:33 > RECOVERY:>>addr:0x980000 --length:0x500000 17:50:33 > SEC_RO:>>addr:0xE80000 --length:0x120000 17:50:33 > __NODL_MISC:>>addr:0xFA0000 --length:0x060000 17:50:33 > LOGO:>>addr:0x1000000 --length:0x300000 17:50:33 > __NODL_EXPDB:>>addr:0x1300000 --length:0x0A0000 17:50:33 > ANDROID:>>addr:0x13A0000 --length:0xC800000 17:50:33 > __NODL_CACHE:>>addr:0xDBA0000 --length:0x3C00000 17:50:34 > USRDATA:>>addr:0x117A0000 --length:0x000000 17:50:34 > 17:50:34 > 17:50:34 > Format addr:0x117A0000 --Format length:0xDE20000 17:50:36 > Format range: Start Address: 0x117A0000,Format Length :0xDE20000 >>Flash erasing complete!

Split flash file done

http://s11.postimg.org/jhhgb80z7/andi_107_2.png

RegaRds
Rehan Shaikh