Post Here ALL Successful Repaired Phone By Volcano/Inferno [SUCCESS REPORTS BY USERS] - Page 300 - GSM-Forum

CDMA GSM · 04-24-2014, 12:05

i need flash file can anybody able to help please.......

Tanha0321 · 04-24-2014, 12:39

READ info

Code:

Analysis of USB port,Please insert phone USB cable.
  Connecting...
  CPU TYPE:6572
  Hardware version:CA01
  Software version:0000
  Boot downloading complete!
  EMMC_ID:0x1501004E355530304D0290106AD5603B
  EMMC_PRODUCT_NAME: SAMSUNG :0x4E355530304D
  EMMC_BOOT1_SIZE: 0x000200000
  EMMC_BOOT2_SIZE: 0x000200000
  EMMC_PRMB_SIZE: 0x000020000
  EMMC_GP1_SIZE: 0x000000000
  EMMC_GP2_SIZE: 0x000000000
  EMMC_GP3_SIZE: 0x000000000
  EMMC_GP4_SIZE: 0x000000000
  EMMC_USER_SIZE: 0x0E9000000
   
    
    
  Analysis of system files...
  PRELOADER:  addr:0x000000 --length:0x600000
  MBR:  addr:0x600000 --length:0x080000
  EBR1:  addr:0x680000 --length:0x080000
  PRO_INFO:  addr:0x700000 --length:0x300000
  NVRAM:  addr:0xA00000 --length:0x500000
  PROTECT_F:  addr:0xF00000 --length:0xA00000
  PROTECT_S:  addr:0x1900000 --length:0xA00000
  SECCFG:  addr:0x2300000 --length:0x020000
  UBOOT:  addr:0x2320000 --length:0x060000
  BOOTIMG:  addr:0x2380000 --length:0x600000
  RECOVERY:  addr:0x2980000 --length:0x600000
  SEC_RO:  addr:0x2F80000 --length:0x040000
  MISC:  addr:0x2FC0000 --length:0x080000
  LOGO:  addr:0x3040000 --length:0x300000
  EBR2:  addr:0x3340000 --length:0x080000
  EXPDB:  addr:0x33C0000 --length:0xA00000
  SPDATA:  addr:0x3DC0000 --length:0x800000
  ANDROID:  addr:0x45C0000 --length:0x38400000
  CACHE:  addr:0x3C9C0000 --length:0x17800000
  USRDATA:  addr:0x541C0000 --length:0x74000000
  FAT:  addr:0xC81C0000 --length:0x1FD60000
  BMTPOOL:  addr:0xFFFF00A8 --length:0x000000
   
   
    Format addr:0x581C0000 --Format length:0x70000000
  Read phone information success.

Format

Code:

Analysis of USB port,Please insert phone USB cable.
  Connecting...
  CPU TYPE:6572
  Hardware version:CA01
  Software version:0000
  Boot downloading complete!
  EMMC_ID:0x1501004E355530304D0290106AD5603B
  EMMC_PRODUCT_NAME: SAMSUNG :0x4E355530304D
  EMMC_BOOT1_SIZE: 0x000200000
  EMMC_BOOT2_SIZE: 0x000200000
  EMMC_PRMB_SIZE: 0x000020000
  EMMC_GP1_SIZE: 0x000000000
  EMMC_GP2_SIZE: 0x000000000
  EMMC_GP3_SIZE: 0x000000000
  EMMC_GP4_SIZE: 0x000000000
  EMMC_USER_SIZE: 0x0E9000000
   
    
    
  Analysis of system files...
  PRELOADER:  addr:0x000000 --length:0x600000
  MBR:  addr:0x600000 --length:0x080000
  EBR1:  addr:0x680000 --length:0x080000
  PRO_INFO:  addr:0x700000 --length:0x300000
  NVRAM:  addr:0xA00000 --length:0x500000
  PROTECT_F:  addr:0xF00000 --length:0xA00000
  PROTECT_S:  addr:0x1900000 --length:0xA00000
  SECCFG:  addr:0x2300000 --length:0x020000
  UBOOT:  addr:0x2320000 --length:0x060000
  BOOTIMG:  addr:0x2380000 --length:0x600000
  RECOVERY:  addr:0x2980000 --length:0x600000
  SEC_RO:  addr:0x2F80000 --length:0x040000
  MISC:  addr:0x2FC0000 --length:0x080000
  LOGO:  addr:0x3040000 --length:0x300000
  EBR2:  addr:0x3340000 --length:0x080000
  EXPDB:  addr:0x33C0000 --length:0xA00000
  SPDATA:  addr:0x3DC0000 --length:0x800000
  ANDROID:  addr:0x45C0000 --length:0x38400000
  CACHE:  addr:0x3C9C0000 --length:0x17800000
  USRDATA:  addr:0x541C0000 --length:0x74000000
  FAT:  addr:0xC81C0000 --length:0x1FD60000
  BMTPOOL:  addr:0xFFFF00A8 --length:0x000000
   
   
    Format addr:0x581C0000 --Format length:0x70000000
  Read phone information success.
  Format range: Start Address: 0x581C0000,Format Length :0x70000000
  Flash erasing complete!
   
  Please take out SIM and Memory card from phone when power on first time, or it will have Memory Lock .
>>If you meet Memory Lock,please take all cards from phone and restart phone again.

Gsm.Universal · 04-25-2014, 12:21

Some Test reports by my self

late but nice test reports and 111% Good i think you like

Galaxy S3 New 4.3 .APK instal

amn32 · 04-26-2014, 06:11

Voice v10 mtk 6572 original imei repaired .

Regards
amn32

nadeemahmed74 · 04-27-2014, 14:19

Micromax-X445 connecting prblm by volcano box....
mt6252 cpu..

niaz muhammad · 04-28-2014, 09:30

mmd z45 6577 hang logo done thanks volcano

AniAxn · 04-28-2014, 18:42

... Micromax A66 Gmail Unlock Done ...

Br,
AniAXN

imraan ali · 04-29-2014, 07:02

qmobile e787i formet done with volcano
Detecting D+ and D-...
Vcc: null
Gnd: 2 4
Detection initiated...
Found: D+ = 6, D- = 8
Detection D+/D- with 1.64 seconds!
Analyzing USB device, please wait...
New USB device: (VID_0E8D&PID_0003)
Detection completed.
Setting pinouts...
Find USB device:MTK USB Port (COM20), (VID_0E8D&PID_0003)
Pinout setting complete.
Connection failed,connect again!
Analysis of USB port,Please insert phone USB cable.
Connecting...
Hardware version:CA00
Software version:0000
CPU TYPE:6260
Internal version:8000
Boot downloading complete!
Flash ID: 00C2002500360000
Flash Type: SF_MX25U3235E
Chip Capacity: 0x400000(4MB)
Baud adjust...complete.
Format range: Start Address: 0x2C9000,Format Length :0x037000
>>Flash erasing complete!

sikandar.mehdi · 04-29-2014, 16:38

Volcano Updated: 2014-04-21
Connecting...
Connection successful,connected state!
Version: V3.8
SN:080-233-581
Port:COM5
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM5 COM7 COM13
Analysis of USB port,Please insert phone USB cable.
Connecting...
Hardware version:CA01
Software version:0001
CPU TYPE:625A
Internal version:8000
Boot downloading complete!
Analysis of USB port,Please insert phone USB cable.
Connecting...
Hardware version:CA01
Software version:0001
CPU TYPE:625A
Internal version:8000
Boot downloading complete!
Flash ID: 00EF004000160000
Flash Type: SF_W25Q32BV
Chip Capacity: 0x400000(4MB)
Format addr:0x003A6000 --Format length:0x0004E000
>>Flash erasing complete!

lahoot · 04-30-2014, 17:25

QTab Q300 Root and unlock patron with volcano

amit_varietymob · 05-02-2014, 12:19

KODASL D8 pattern lock successfully removed. Cpu type 6820/8810. Boot key is volume up. Here is the log with volcano:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 00EC00BC00555400
Flash Type:[SAMSUNG] K9F4G08/K9K4G08
FLASH LEN:0x20000000
Reading completed.
Read time: 96 min 22 s
The data has been saved in C:\Users\shree\Desktop\_20140502_163422_FullFlash kodasl d8.bin, size: 512 M.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 210m(system),170m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
>>Set to Factory successfully.

amit_varietymob · 05-02-2014, 12:19

KODASL D8 pattern lock successfully removed. Cpu type 6820/8810. Boot key is volume up. Here is the log with volcano:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 00EC00BC00555400
Flash Type:[SAMSUNG] K9F4G08/K9K4G08
FLASH LEN:0x20000000
Reading completed.
Read time: 96 min 22 s
The data has been saved in C:\Users\shree\Desktop\_20140502_163422_FullFlash kodasl d8.bin, size: 512 M.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 210m(system),170m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
>>Set to Factory successfully.

ansaralikmk · 05-03-2014, 10:49

Detection initiated, connect the phone and power on it...
Vcc: 4
Gnd: 2
RX: 9, TX: 7

Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading complete!
Flash ID: 00EF004000150000
Flash Type: SF_W25Q16CV
Chip Capacity: 0x200000(2MB)
Mobile phone software version for:G2800D_V100R002B002C343SP04
Baud adjust...complete.
Flash reading complete!
privacy:1234
privacy:7860
usercode:1234
usercode:7860

niaz muhammad · 05-03-2014, 12:03

reed flash done

-=C.J.S=- · 05-05-2014, 04:19

Cherry Mobile T22 Success Flashing Via VolcanoBox....

Problem: Logo Only, DONE by Volcano v2.6.3!!!

1.Format But No Luck!!!

2.Refalsh Phone From Good and Tested Back-up FlashFile

Here's The File Link: Click Me

Quote:

Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.45 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading...
CPU ID:00508003
Boot downloading finished.
Flash Type: SAMSUNG_K5L2833
Flash ID: 00EC240200000000
Flash Size: 01000000h
CPU : 8533d/8532_series
Flash Erasing finished
>>Flash Writing finished.

04-27-2014, 14:19	#4490 (permalink)
nadeemahmed74 Junior Member Join Date: Feb 2011 Posts: 29 Member: 1517191 Status: Offline Thanks Meter: 1	Micromax-X445 connecting prblm Micromax-X445 connecting prblm by volcano box.... mt6252 cpu..

04-28-2014, 18:42	#4492 (permalink)
AniAxn Product Supporter Join Date: Jun 2009 Location: eMMC & UFS Posts: 4,600 Member: 1045758 Status: Offline Sonork: 100.1613661(Offline) Thanks Meter: 4,307	Micromax A66 Gmail Unlock Done ... ... Micromax A66 Gmail Unlock Done ... Br, AniAXN

04-29-2014, 16:38	#4494 (permalink)
sikandar.mehdi Freak Poster Join Date: Dec 2013 Location: Saudi Arbia Posts: 273 Member: 2080403 Status: Offline Sonork: 100.1645596 Thanks Meter: 52	nokia 108 blinking don volcano Volcano Updated: 2014-04-21 Connecting... Connection successful,connected state! Version: V3.8 SN:080-233-581 Port:COM5 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM5 COM7 COM13 Analysis of USB port,Please insert phone USB cable. Connecting... Hardware version:CA01 Software version:0001 CPU TYPE:625A Internal version:8000 Boot downloading complete! Analysis of USB port,Please insert phone USB cable. Connecting... Hardware version:CA01 Software version:0001 CPU TYPE:625A Internal version:8000 Boot downloading complete! Flash ID: 00EF004000160000 Flash Type: SF_W25Q32BV Chip Capacity: 0x400000(4MB) Format addr:0x003A6000 --Format length:0x0004E000 >>Flash erasing complete!

05-03-2014, 10:49	#4498 (permalink)
ansaralikmk Junior Member Join Date: Mar 2010 Posts: 19 Member: 1264578 Status: Offline Thanks Meter: 0	Viva g2800s successfull unlock Detection initiated, connect the phone and power on it... Vcc: 4 Gnd: 2 RX: 9, TX: 7 Connecting... Hardware version:CA05 Software version:0101 CPU TYPE:6252 Internal version:8B00 Boot downloading complete! Flash ID: 00EF004000150000 Flash Type: SF_W25Q16CV Chip Capacity: 0x200000(2MB) Mobile phone software version for:G2800D_V100R002B002C343SP04 Baud adjust...complete. Flash reading complete! privacy:1234 privacy:7860 usercode:1234 usercode:7860

04-24-2014, 12:05	#4486 (permalink)
CDMA GSM Junior Member Join Date: Apr 2014 Posts: 5 Member: 2168956 Status: Offline Thanks Meter: 0	i need flash file can anybody able to help please.......

04-25-2014, 12:21	#4488 (permalink)
Gsm.Universal No Life Poster Join Date: Feb 2011 Location: Pakistan & UAE (Dubai) Age: 34 Posts: 3,011 Member: 1526738 Status: Offline Sonork: 100.1607644 Thanks Meter: 6,688	Some Test reports by my self late but nice test reports and 111% Good i think you like Galaxy S3 New 4.3 .APK instal

04-26-2014, 06:11	#4489 (permalink)
amn32 No Life Poster Join Date: Aug 2007 Location: Under Blue Posts: 5,080 Member: 569925 Status: Offline Sonork: 100.1624057 Thanks Meter: 6,313	Voice v10 mtk 6572 original imei repaired . Regards amn32

04-29-2014, 07:02	#4493 (permalink)
imraan ali Freak Poster Join Date: Sep 2013 Location: PaKiStAn & KSA Posts: 483 Member: 2023768 Status: Offline Sonork: 100.1661054 Thanks Meter: 76	qmobile e787i formet done with volcano Detecting D+ and D-... Vcc: null Gnd: 2 4 Detection initiated... Found: D+ = 6, D- = 8 Detection D+/D- with 1.64 seconds! Analyzing USB device, please wait... New USB device: (VID_0E8D&PID_0003) Detection completed. Setting pinouts... Find USB device:MTK USB Port (COM20), (VID_0E8D&PID_0003) Pinout setting complete. Connection failed,connect again! Analysis of USB port,Please insert phone USB cable. Connecting... Hardware version:CA00 Software version:0000 CPU TYPE:6260 Internal version:8000 Boot downloading complete! Flash ID: 00C2002500360000 Flash Type: SF_MX25U3235E Chip Capacity: 0x400000(4MB) Baud adjust...complete. Format range: Start Address: 0x2C9000,Format Length :0x037000 >>Flash erasing complete!

05-02-2014, 12:19	#4496 (permalink)
amit_varietymob Freak Poster Join Date: Nov 2006 Posts: 403 Member: 399228 Status: Offline Thanks Meter: 66	KODASL D8 pattern lock successfully removed. Cpu type 6820/8810. Boot key is volume up. Here is the log with volcano: Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:SC8810/6820 [88100001] Flash ID: 00EC00BC00555400 Flash Type:[SAMSUNG] K9F4G08/K9K4G08 FLASH LEN:0x20000000 Reading completed. Read time: 96 min 22 s The data has been saved in C:\Users\shree\Desktop\_20140502_163422_FullFlash kodasl d8.bin, size: 512 M. Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 210m(system),170m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. >>Set to Factory successfully.

05-02-2014, 12:19	#4497 (permalink)
amit_varietymob Freak Poster Join Date: Nov 2006 Posts: 403 Member: 399228 Status: Offline Thanks Meter: 66	KODASL D8 pattern lock successfully removed. Cpu type 6820/8810. Boot key is volume up. Here is the log with volcano: Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:SC8810/6820 [88100001] Flash ID: 00EC00BC00555400 Flash Type:[SAMSUNG] K9F4G08/K9K4G08 FLASH LEN:0x20000000 Reading completed. Read time: 96 min 22 s The data has been saved in C:\Users\shree\Desktop\_20140502_163422_FullFlash kodasl d8.bin, size: 512 M. Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM30), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 210m(system),170m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. >>Set to Factory successfully.