CoolSand Problems [Fixed] - GSM-Forum

inta_coy · 06-16-2012, 19:11

box is not able to detect pinout....
Flash ID 00C80040(00170000)
Flash Model GD25Q64

if i manual solder rx and tx and connect read done BUT write error and format error.

Code:

00:38:14 Welcome to use McnPro light Box 
00:38:14 Baud setting ...
00:38:15 Set Baud done 
00:38:15 SW V12.10
00:38:15 FW V2.04
00:38:15 SN XXXXXXXXXXXXX
00:38:15 AC XXXX-XXXX-XXXX-XXXX-XXXX
00:38:15 Box Connected!
00:38:34 CoolSand Pinout Scaning,Press and HOLD Power button now !
00:38:34 <<.....
00:38:40 User Abort
00:38:44 CoolSand Pinout Scaning,Press and HOLD Power button now !
00:38:44 <<...#......
00:38:54 Scan pinouts Error2   --------->  SCANING PINOUT ERROR
00:39:13 Pinout Applied
00:39:20 Pinout Applied  ---------> MANUAL SOLDER "OK"
00:39:20 Phone detected, Wait...
00:39:23 Done.
00:39:24 CPU Type Coolsand  ----------> READ FLASH "OK"
00:39:24 Flash Type NOR
00:39:24 Flash ID 00C80040(00170000)
00:39:24 Flash Model GD25Q64
00:39:24 Flash Size 0x800000(8,0M)
00:39:24 Reading,Wait...
00:46:13 Read Done.
00:46:20 File saved:D:\MCN\FIRMWARE BACKUP\COOLSAND\Coolsand_GD25Q64.bin
00:46:35 Pinout Applied ----------> UNLOCK USER CODE "OK"
00:46:35 Phone detected, Wait...
00:46:40 Done.
00:46:40 CPU Type Coolsand
00:46:40 Flash Type NOR
00:46:40 Flash ID 00C80040(00170000)
00:46:40 Flash Model GD25Q64
00:46:40 Flash Size 0x800000(8,0M)
00:46:40 Starting,Wait...
00:47:27 Unlock code 1234
00:47:27 IMEI1 :350100300036451
00:47:27 IMEI2 :350100300036451
00:47:27 IMEI3 :350100300036451
00:47:27 IMEI4 :350100300036451
00:49:18 Pinout Applied
00:49:18 Phone detected, Wait...  --------> FORMAT - AUTO MODE "ERROR"
00:49:21 Done.
00:49:22 Initialize boot,Wait...
00:49:22 BootLoad Error. ID:2611
00:49:31 Pinout Applied
00:49:31 Phone detected, Wait... ---------> WRITE FIRMWARE "ERROR"
00:49:34 Done.
00:49:35 Initialize boot,Wait...
00:49:36 BootLoad Error. ID:2611

plz solved this problem.....

THX...

**Mcnbox** · 06-16-2012, 19:55

You have to update your box to the lastest version !

inta_coy · 06-16-2012, 20:39

OK all solved "version 1.2.1.2"

ONE THAT HAS NOT LIVED, PINOUT EQUIPMENT MANUAL

THX...

basia · 06-21-2012, 05:31

good respond, bro

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-21-1999 19:43
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

06-16-2012, 19:55	#2 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	You have to update your box to the lastest version !

06-16-2012, 20:39	#3 (permalink)
inta_coy Crazy Poster Join Date: Aug 2007 Posts: 59 Member: 574515 Status: Offline Thanks Meter: 7	OK all solved "version 1.2.1.2" ONE THAT HAS NOT LIVED, PINOUT EQUIPMENT MANUAL THX...

06-21-2012, 05:31	#4 (permalink)
basia No Life Poster Join Date: Feb 2011 Posts: 701 Member: 1519258 Status: Offline Thanks Meter: 243	good respond, bro