I7100 Flash TYBC0A111236KC10 Backup is done.

[Kolumb]

Info to Avator Box:

Initializing...
 DA_LIB_VER_5.6.1.1
 You must install the correct USB drivers before any actions...
 You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
 Auto reset and search the USB-to-Serial...
 Connecting...
 Spd USB-to-Serial=COM10
 Connected...sending boot...
 Boot1 is Done.
 Wait for ACK...
 Done.
 Change baud to 921600
 Sending Boot2...
 Boot2 is Done.
 Wait for ACK...
 Done.
 ArmBootMode: 8810004000005A00_00
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 is ok
 Reading phone HW info...
 Read info is done.
 CPU: SC8810      Flash: NAND_TYBC0A111236KC10
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 00
 Failed to get address of NV.
 Read FS info...done

Read full, to ADB:

Please RePower on & off
Searching USB to Serial Port...
SU2Serial Port: COM26
Connecting to Phone,Wait..
Timeout. Please Check Pinouts or ReDo
  Connecting to Phone,Wait..ok
checking info...
need sdcard Space230M
  Connecting to Phone,Wait..ok
checking info...
Max block Space:230M  sdcard Space:956,72M  SD:/mnt/sdcard
Done.
Hardware:mtk6517
Reading spl.img...(256K)
Done.
Reading 2ndbl.img...(512K)
Done.
Reading params.img...(256K)
Done.
Reading vmjaluna.img...(512K)
Done.
Reading modem.img...(10M)
Done.
Reading fixnv.img...(3,75M)
Done.
Reading backupfixnv.img...(3,75M)
Done.
Reading dsp.img...(5M)
Done.
Reading runtimenv.img...(3,75M)
Done.
Reading boot.img...(10M)
Done.
Reading recovery.img...(10M)
Done.
Reading system.img...(230M)
Done.
Reading userdata.img...(160M)
Done.
Reading cache.img...(60M)
Done.
Reading misc.img...(256K)
Done.
Reading boot_logo.img...(1M)
Done.
Reading fastboot_logo.img...(1M)
Done.
Reading productinfo.img...(3,75M)
Done.
Reading kpanic.img...(512K)
Done.
file save to :D:\\I7100_140103182438

[Kolumb]

DOWNLOAD THIS FULL

I7100_140104121748.rar