How to Install Android 4.4.2 KitKat Official Firmware on Galaxy S4 I9500 through Odin
 

http://tihe.us/wp-content/uploads/20...-Galaxy-s4.jpg


Android 4.4.2 KitKat I9500XXUFNB3 Official Firmware Download List


India INU:

I9500XXUFNB3_I9500ODDFNB3_INU.zip | INU-I9500XXUFNB3-20140224140801.zip[


India INS:

I9500XXUFNB3_I9500ODDFNB3_INS.zip | INS-I9500XXUFNB3-20140224145249.zip


Russia:

I9500XXUFNB3_I9500SERFNB3_SER.zip | SER-I9500XXUFNB3-20140220172446.zip


MegaFiles Mirror

Other Mirror 1 | Mirror 2 | Mirror 3 | Mirror 4


Download Torrent: I9500XXUFNB3_I9500SERFNB3_SER.zip.torrent



1. Download Android 4.4.2 XXUFNB3 Firmware for Galaxy S4 I9500 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S4 I9500 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S4 I9500 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9500XXDLJ5_I9500ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish