n910a Bricked.. ODIN FAIL
 

n910a Bricked.. ODIN FAIL

I try with different firmwares..
4.4.4 and 5.0.1 .. 1 file PDA and 4 files, bl, ap,cp, csc

N910AUCU1ANIE_ATT1ANIE (from Z3X support)
N910AUCU1ANIE_N910AATT1ANIE.oct (octopus box)
N910AUCU1BNK3_N910AATT1BNK3_ATT_Android_4.4.4.oct (octopus box)
N910AUCU1BNK3 -- 4.4.4
N910AUCU1COC2 -- 5.0.1
N910AUCU1COC4 -- 5.0.1

always ODIN FAIL, Z3x and octopus FAIL, CHIMERA tool FAIL..


I need Solution please!!

ODIN LOGS:

<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Erase...
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

can you post a screenshot of download mode... i need to see it..

thanks in advance,, for help me

this screen show me when Odin Fails.. selecting full firmware in PDA, or selecting BL AP CP CSC..
Also I try flash without BL.. Odin Fails too..

Odin OK only when I flash with CP file..

were you on COC5 update before flashing?

i am just trying to figure out whats going on... it seems like you are stuck on a locked bootloader, and since there is no new Odin flashable bootloader released yet you have to wait for a new release...

besides that it seems like you have done almost all appropriate steps... here other steps you can try:

1. Flash with a pit file (attached within this post)

2. Try this pre-rooted firmware: androidfilehost.com - N910AUCU1COC4_Rooted.tar.md5

3. Flashing custom recovery is not an option for you since its bootloader is locked and only developer edition phones can be flashed with custom recovery...

4. You can try this insecure boot, if it works you may flash to stock: androidfilehost.com - insecure_boot.img.tar

VERY THANKS

I'm download files right now..

I try Flash with N910AUCU1COC4_Rooted.tar.md5 and PIT..

ODIN FAILS too!

possibly Phone had COC5 update because I see Lollipop in the phone before flashing..

emmc . fail . ATF repair emmc

Please do not try to downgrade you SW 5.1 to 5.0.1

Please download new SW and use only the higher SW currently for this device.

how can I extract boot.img from firmware.tar.md5???

I try with 7zip but not extract

Try to recover your phone with kies 3 software

with kies 3 same error...

I think the problem is this... the latest firmware for ODIN is N910AUCU1COC4

and latest for OTA is N910AUCU2COC5.. I need that firm.. or I need wait for solution!!

I find this tutorial>


How to Install Android 5.0.1 Lollipop UCU2COC5 N910AUCU2COC5 on AT&T Samsung Galaxy Note 4 SM-N910A Automatically [Tutorial]

1. You will have to search for “Settings” option on your SM-N910A.

2. It is the time to tap “Settings” option on your SM-N910A.

3. You will have to search for “About phone” option on your SM-N910A.

4. It is the time to tap “About phone” option on your SM-N910A.

5. You will have to search for “software update” option on your SM-N910A.

6. It is the time to tap “software update” option on your SM-N910A.

7. It is the time to tap “update” button to install Android 5.0.1 UCU2COC5 N910AUCU2COC5 automatically on your Note 4 SM-N910A.

8. It is the time to wait until SM-N910A reboots.

Currently, it is not possible to install Android 5.0.1 UCU2COC5 N910AUCU2COC5 on SM-N910A manually using Odin.

do you have any boxes? Z3x or octoplus? They seem to flash better sector to sector flashing.

it hs nothing to do with protocols or flashing...
ATT bootloader is locked, once you mess with it, you need a newer version of bootloader to unbrick or swap the device

Possible Solution
 

This may help your issue...



http://forum.gsmhosting.com/vbb/f684...-step-1961415/

[QUOTE=enigmadapuzzle;11206881]This may help your issue...




i have the same problem this solution not work