Unbrick Samsung Qualcom 9008 Files For Free

[elliwigy]

Originally Posted by repairs4you2

Yes I know the Note 9 is still on bootloader 1 and I do appreciate it although there is a version 2 on the Sk telcom version floating.



But I was asking about the other Samsung models you said you have and what bootloader those edl files support up to S6 and up by chance do you have any edl s10 files



I also contacted you by pm to find out the price

i replied

Sent from my SM-N960U using Tapatalk

[nageorge]

I have g955u bit5 dead boot repair
pm

[Denva]

Originally Posted by fofesz

Thank you, repaired G930V aswell!

Make TP, connect without battery and Qualcomm 9008 recognised, remove TP than start flashing.

uploaded again:
https://mega.nz/#!6lwDQADb!24PISN8Q6...m1l1mqGghyi_6M

link not working can you upload new link ?

[Denva]

Data Bits: 7
Stop Bits: 1
Timeout: OFF
XON/XOFF: OFF
CTS handshaking: OFF
DSR handshaking: OFF
DSR sensitivity: OFF
DTR circuit: ON
RTS circuit: ON


Status for device CON:
----------------------
Lines: 40
Columns: 110
Keyboard rate: 31
Keyboard delay: 1
Code page: 437


íδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδ
Input Port Number[1~300,x:Exit]:34
34
Start Recovery.
emmcdl.exe -p COM34 -f prog_ufs_firehose_8996_ddr.elf -MemoryName ufs -SetActivePartition 1 -x rawprogram0.xml -x rawprogram1.xml -x rawprogram2.xml -x rawprogram3.xml
Version 2.10
Downloading flash programmer: prog_ufs_firehose_8996_ddr.elf
Successfully open flash programmer to write: prog_ufs_firehose_8996_ddr.elf
Expecting SAHARA_END_TRANSFER but found: 0

!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!


Programming UFS device using SECTOR_SIZE=4096

<?xml version = "1.0" ?><data><configure MemoryName="ufs" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="1048576"/></data>

What could be the problem here ?

[damond]

anyway to get it working with g930v bit 10?

[ashahzad_pk]

Dear Brothers i am looking for G965U U6 dead boot 9008 repair files. any help is appreciated. thanks in advance

[luckycool]

Originally Posted by damond

anyway to get it working with g930v bit 10?

I m also looking for this .

[gwlime]

Originally Posted by ahmedmohmed7274

Hello :

.... - [Click to open]

Today, we will provide you with repair files for all the phones of samsung dead after flashing Comb or Eng-root or error downgrade
fix will be done in Qualcom 9008 Mode




Download File And Run Recovery.bat




make TP in your Phone to enter Qualcom mode 9008




last waiting for repair done and enter download mode and make full flashing




Download link for files====> Unbrick Samsung Qualcom 9008 Files 35 - 50 - 55.rar

I hope everyone benefits
Greetings to you and thank you

bro :
ahmed mohmed 7274

hi.. thanks for share.

please teach us, how to make this file

[hugoluckystrike]

Would you please tell us how to use this files? Thanks! Unbrick+Samsung+Qualcom+9008+Files+35+-+50+-+55 or Files 35 - 50 - 55

[haidershah907]

Can you share the link for Sm-G935v U4?

[haidershah907]

ahmed mohmed 7274 [/QUOTE]
Can I use G935a file (that you have provided here) on a G935v that's a verizon variant?
Or I just simply replace its files with the same files derived from G935v's stock firmware?
If I am okay to use your provided file then which stock firmware would I need to flash on my device? 935A U5 Or 935v U5?

[Medusin]

i have A920F in qualcomm hs usb device after flash combination file... anyone have files .xml for unbrick or what can i Do? i have easy jtag but not have UFS BGA socket...

please socket