Lg p970 optimus flashing guide - Page 3 - GSM-Forum

abibulaf · 07-10-2014, 12:20

00:00.0 Sec

ownload Start...
00:02.1 Sec :RomBinary Download start
00:02.1 Sec :PSI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.6 Sec :Confirm IFX communication
00:07.6 Sec :PSI RAM writing end
00:07.6 Sec :Start PSI RAM
00:07.6 Sec :EBL writing start
00:27.6 Sec :Timeout error is occured
00:27.6 Sec :Start EBL error!

anyone can help me plz? at 50% give me err

PRAVEEN VERMA · 08-08-2014, 12:57

imei empety this tool

ashish_telecom · 12-05-2014, 06:59

Hard reset LG Optimus Black P970 as follows:

When the phone is switched off, press and hold the Volume down key + Power key with your left hand.
When the LED on the bottom of the phone lights up, release Volume down key + Power keys and press and hold the Home key (for about 2 seconds) at the same time.
The phone will turn on and perform a factory reset immediately.
When the LG logo is displayed on the screen, continue to hold the keys for around two seconds, and then release all them at the same time, before the LG logo disappears.

anakbatam · 08-16-2015, 23:40

thank good post solve my p970

gsmmaruf · 09-17-2015, 14:19

very good solution,its help me very much,thanks

RIJAS2010 · 09-18-2015, 11:21

still using my old post

thanks all friends ..........................

edin2008 · 01-18-2016, 18:28

folowed all instruction and i reset the pattern lock

thankssss

00:00.0 Sec

ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.0 Sec :Confirm IFX communication
00:07.0 Sec :PSI RAM writing end
00:07.0 Sec :Start PSI RAM
00:07.0 Sec :EBL writing start
00:23.3 Sec :Start EBL
00:23.3 Sec :Set capabilities to be used
00:24.3 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:24.4 Sec :Set flash ID complete
00:24.4 Sec :Set Infineon CFI Information 1
00:24.4 Sec :Set Infineon CFI Information 2
00:24.4 Sec :PSI Download start
00:24.5 Sec :Set FLASH address
00:24.7 Sec :PSI Download success
00:24.7 Sec :SLB Download start
00:24.8 Sec :Set FLASH address
00:26.4 Sec :SLB Download success
00:26.4 Sec :Aeneas Download start
00:26.8 Sec :Erase was executed rightly!
00:26.9 Sec :Set FLASH address
00:30.1 Sec :Aeneas Download success
00:30.1 Sec :Code Download start
00:30.2 Sec :Erase was executed rightly!
00:30.3 Sec :Set FLASH address
01:51.8 Sec :Code Download success
01:51.9 Sec :EMMC writing start
01:51.9 Sec :Success to erase
01:51.9 Sec :Partition size is 128 KBytes
01:51.9 Sec :Success to erase
01:51.9 Sec :Partition size is 128 KBytes
01:52.0 Sec :Success to erase
01:52.0 Sec :Partition size is 384 KBytes
01:52.1 Sec :Success to erase
01:52.1 Sec :Partition size is 3968 KBytes
01:54.7 Sec :Success to erase
01:54.7 Sec :Partition size is 4480 KBytes
01:55.7 Sec :Partition size is 0 KBytes
01:55.7 Sec :Success to erase
01:55.7 Sec :Partition size is 2048 KBytes
01:57.1 Sec :Partition size is 0 KBytes
01:57.1 Sec :Success to erase
01:57.1 Sec :Partition size is 392320 KBytes
03:20.2 Sec :Partition size is 0 KBytes
03:20.2 Sec :Partition size is 0 KBytes
03:20.2 Sec :Partition size is 0 KBytes
03:20.2 Sec :Success to erase
03:20.2 Sec :Partition size is 128 KBytes
03:20.2 Sec :Partition size is 0 KBytes
03:20.2 Sec :RomBinary Download success
03:20.2 Sec :Target is resetting
03:20.3 Sec

ownload complete

Kirumira · 04-22-2016, 13:03

Its Old but Working Thanks Alot bro.you saved me

banosan · 04-22-2016, 18:28

very good solution
thank's mate

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
GID for nokia 5110 of telecel or TMN or Optimus?	hicom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-13-1999 15:29

07-10-2014, 12:20	#31 (permalink)
abibulaf Insane Poster Join Date: Jan 2005 Age: 47 Posts: 65 Member: 106234 Status: Offline Thanks Meter: 7	00:00.0 Sec ownload Start... 00:02.1 Sec :RomBinary Download start 00:02.1 Sec :PSI RAM writing start 00:02.1 Sec :Trying to communicate with IFX modem 00:07.6 Sec :Confirm IFX communication 00:07.6 Sec :PSI RAM writing end 00:07.6 Sec :Start PSI RAM 00:07.6 Sec :EBL writing start 00:27.6 Sec :Timeout error is occured 00:27.6 Sec :Start EBL error! anyone can help me plz? at 50% give me err

08-08-2014, 12:57	#32 (permalink)
PRAVEEN VERMA Major Poster Join Date: May 2007 Posts: 45 Member: 511593 Status: Offline Thanks Meter: 2	imei empety this tool

12-05-2014, 06:59	#33 (permalink)
ashish_telecom Freak Poster Join Date: Jan 2013 Location: punjab Posts: 211 Member: 1870189 Status: Offline Thanks Meter: 33	Hard reset LG Optimus Black P970 as follows: When the phone is switched off, press and hold the Volume down key + Power key with your left hand. When the LED on the bottom of the phone lights up, release Volume down key + Power keys and press and hold the Home key (for about 2 seconds) at the same time. The phone will turn on and perform a factory reset immediately. When the LG logo is displayed on the screen, continue to hold the keys for around two seconds, and then release all them at the same time, before the LG logo disappears.

08-16-2015, 23:40	#34 (permalink)
anakbatam Registered User Join Date: Mar 2012 Location: indonesia Posts: 61 Member: 1731024 Status: Offline Thanks Meter: 13	thank good post solve my p970

09-17-2015, 14:19	#35 (permalink)
gsmmaruf Insane Poster Join Date: Jan 2009 Posts: 74 Member: 950982 Status: Offline Thanks Meter: 18	very good solution,its help me very much,thanks

09-18-2015, 11:21	#36 (permalink)
RIJAS2010 No Life Poster Join Date: Oct 2010 Location: INDIA - GOING MY WAY ......... Age: 31 Posts: 724 Member: 1417101 Status: Offline Sonork: 100.1619006 Thanks Meter: 157	still using my old post thanks all friends ..........................

01-18-2016, 18:28	#37 (permalink)
edin2008 Insane Poster Join Date: Jan 2014 Posts: 77 Member: 2114773 Status: Offline Thanks Meter: 20	folowed all instruction and i reset the pattern lock thankssss 00:00.0 Sec ownload Start... 00:02.0 Sec :RomBinary Download start 00:02.0 Sec :PSI RAM writing start 00:02.0 Sec :Trying to communicate with IFX modem 00:07.0 Sec :Confirm IFX communication 00:07.0 Sec :PSI RAM writing end 00:07.0 Sec :Start PSI RAM 00:07.0 Sec :EBL writing start 00:23.3 Sec :Start EBL 00:23.3 Sec :Set capabilities to be used 00:24.3 Sec :Baudrate Change: 115200bps ===> 3000000bps 00:24.4 Sec :Set flash ID complete 00:24.4 Sec :Set Infineon CFI Information 1 00:24.4 Sec :Set Infineon CFI Information 2 00:24.4 Sec :PSI Download start 00:24.5 Sec :Set FLASH address 00:24.7 Sec :PSI Download success 00:24.7 Sec :SLB Download start 00:24.8 Sec :Set FLASH address 00:26.4 Sec :SLB Download success 00:26.4 Sec :Aeneas Download start 00:26.8 Sec :Erase was executed rightly! 00:26.9 Sec :Set FLASH address 00:30.1 Sec :Aeneas Download success 00:30.1 Sec :Code Download start 00:30.2 Sec :Erase was executed rightly! 00:30.3 Sec :Set FLASH address 01:51.8 Sec :Code Download success 01:51.9 Sec :EMMC writing start 01:51.9 Sec :Success to erase 01:51.9 Sec :Partition size is 128 KBytes 01:51.9 Sec :Success to erase 01:51.9 Sec :Partition size is 128 KBytes 01:52.0 Sec :Success to erase 01:52.0 Sec :Partition size is 384 KBytes 01:52.1 Sec :Success to erase 01:52.1 Sec :Partition size is 3968 KBytes 01:54.7 Sec :Success to erase 01:54.7 Sec :Partition size is 4480 KBytes 01:55.7 Sec :Partition size is 0 KBytes 01:55.7 Sec :Success to erase 01:55.7 Sec :Partition size is 2048 KBytes 01:57.1 Sec :Partition size is 0 KBytes 01:57.1 Sec :Success to erase 01:57.1 Sec :Partition size is 392320 KBytes 03:20.2 Sec :Partition size is 0 KBytes 03:20.2 Sec :Partition size is 0 KBytes 03:20.2 Sec :Partition size is 0 KBytes 03:20.2 Sec :Success to erase 03:20.2 Sec :Partition size is 128 KBytes 03:20.2 Sec :Partition size is 0 KBytes 03:20.2 Sec :RomBinary Download success 03:20.2 Sec :Target is resetting 03:20.3 Sec ownload complete

04-22-2016, 13:03	#38 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,927 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,423	Its Old but Working Thanks Alot bro.you saved me

04-22-2016, 18:28	#39 (permalink)
banosan Junior Member Join Date: Apr 2016 Posts: 3 Member: 2557065 Status: Offline Thanks Meter: 0	very good solution thank's mate