ALL Coding(Vag-com)

[Hazgui]

VAG-COM procedures
________________________________________
Taillights:

[Select]
[09 - Centr. Elect.]
[07 - Coding]
[Long Coding Helper]

Byte 9: Uncheck all the boxes or change the DEC box in the figure 0 (zero)

[Transfer Coding!]
[Do It!]
Activate Leaving Home & Coming Home


NOTE: It is not necessary to have your car lights or light sensor for automatic turn on these features!


[Select]
[09 - Cent. Elect.]
[07 - Coding]
[Long Coding Helper]

Byte 0:
- Check Bit - 5 (Light Driving Assistance - Leaving Home Active)
- Check Bit - 7 (Coming Home-active)

[Transfer Coding!]
[Do It!]
CD Radio screen display speed.


If set to show speed, we will see the title song or radio station.


[Select]
[56 - Radio]
[10 - Adaptation]

Channel 02: 0 = off / 1 = activate (display speed in km / h on the radio display)

[Test]
[Save]
[Done, Go Back]
Closing project when you flash or beam

[Select]
[09 - Centr. Elect.]
[07 - Coding]
[Long Coding Helper]

Byte 17: Check Bit - 5 (Front Fog Lights deactivated with High Beam)

[Transfer Coding!]
[Do It!]




Change time for Coming Home & Leaving Home



[Select]
[09 - Cent. Elect.]
[10 - Adaptation]

Channel 01: number of seconds you want to be actively coming home - from 0 to 120
Channel 02: number of seconds you want to be actively leaving home - from 0 to 120

[Test]
[Save]
[Done, Go Back]

Regeneration particulate filter (DPF).


NOTE: This procedure is performed only if the procedure described in the user manual of the car does not work!

Tested on 140 hp 2.0 TDI engine.

Put the ignition, engine running water over 50 degrees (see Temperature Measuring Blocks channel 002, field no. 4)

DPF values to follow in Measuring Blocks channel 075, box no. 3. If the load value is above specs (from box No. 2), the filter must be replaced, otherwise it can crack during regeneration.

Consumers attach electrical and mechanical engine can be started (incalizre seats, climate, lighting, etc etc)

EGT's (exhaust gas turbine AHEAD) to be above 700 ° C before starting the test.


[Select]
[01 - Engine]
[Coding-II - 11]

Enable regeneration by introducing code 21295.
[Do It!]
[MEAS. Blocks - 08]

Groups-select channels 070 and 075.

[Go!]

Meanings:
Box No. 070 Canal. 1: Regeneration status (active Regeneration xxxxxxx1 = Normal, Forced Regeneration xxxxxx1x = active)
Box No. 070 Canal. 3: Regeneration Counter / Timer Duration
Box No. 075 Canal. 1: EGT before turbo
Box No. 075 Canal. 2: EGT before Particle Filter
075 Canal box 3: Charge Particle Filter - Particle Filter Load
075 Canal box 4: EGT by Particle Filter

Turn and follow the above mentioned values.

The car runs 30-60 km / h - at 1500-2500 rpm, duration approx. 15 to 20 minutes. Particle Filter Load driving until it becomes closer to 0% (but in the mentioned period).

If the values do not decrease when driving conditions are not appropriate with the data here or your engine has mechanical or electronic problem (valves, cam, overhead cam, injectors, compression - or flow meter, water sensors, actuators turbo / EGR)

Cancellation diagnosis error "bulb burned signaling



[Select]
[09 - Centr. Elect.]
[07 - Coding]
[Long Coding Helper]

Byte 18:
- uncheck bit 5 (Cold Diagnosis Turn Signals active)
- uncheck bit 7 (Cold Side Turn Signals active Diagnosis)

[Transfer Coding!]
[Do It!]

Change screen display language


[Select]
[17 - Instruments]
[10 - Adaptation]

Channel 04:

00001 - German
00 002 - English
00003 - French
00 004 - Italian
00 005 - Spanish
00 006 - Portuguese
00,007 - no text
00,008 - Czech

[Test]
[Save]

[Done, Go Back]
Automatic shutdown after the car speed 15km / h


[Select]
[46 - Cent. Conv.]
[10 - Adaptation]

Channel 03: Auto Lock after 15km / h (1 = ON / 2 = Deactivate)

[Test]
[Save]
[Done, Go Back]

Automatic opening of the car after removing the key from the ignition


[Select]
[46 - Cent. Conv.]
[10 - Adaptation]

Channel 04: Auto Unlock after removing the key (1 = ON / 2 = Deactivate)

[Test]
[Save]
[Done, Go Back]

Optionally you can set when closing / opening the car to catch fire damage or to hear a short clacson
For these changes and:


Optional channels - blinkers flash or sound horn said:

Channel 05 Unlock, horn sounds (1 = ON / 2 = Deactivate)
Channel 06: Lock, horn sounds (1 = ON / 2 = Deactivate)
Channel 07 Unlock, turn signals flash (1 = ON / 2 = Deactivate)
Channel 08 Unlock, turn signals flash (1 = ON / 2 = Deactivate)


SEAT BELT CHIME:

Control Module Coding
Select 17 (Instrument Cluster)
Coding -> Function 07
00??x0x: Extra-Options

+01 - Brake Pad Warning active
+02 - Seatbelt Warning active
+04 - Washer Fluid Warning active
+16 - Sedan (Jetta)

So if you wanted everything active....
0023x0x where x is the value of the original coding, let's say it was set there from the factory.

To remove seat belt warning, just subtract the 02.... so it would now be:
0021x0x
My stock coding:
0023203
With no seat belt chime:
0021203

Enable automatic closing of windows by holding down the button just 2 seconds

[Select]
[46 - Central Conv]
[07 - Coding]
[Long Coding Helper]

Byte 6:
- Check Bit 6 (Comfort function autom. closing)

[Transfer Coding!]

[Do It!]
Enable DRL (s) per project to 50% in intensity


[Select]
[09 - Central Electric]
[07 - Coding]
[Long Coding Helper]

Byte 00: - Check Bit 4 (Daytime Running Lights (North America))
Byte 17: - Check Bit 4 (via Daylight Running Light Front Fog Lights)
Byte 20:
- DEC changed the value in the box (in percentage) in 50

[Transfer Coding!]
[Do It!]
Opening pistons to replace rear brake pads


[Select]
[53 - Parking Brake]
[04 - Basig Settings]
Group: 006
[Start!]
Activating Basic Settings
[CON / DEC / Next]
(This will open the caliper.)
[Done, Go Back!]
Now you can replace the brake pads

After closing piston rear brake pad replacement


[Select]
[53 - Parking Brake]
[04 - Basig Settings]
Group: 007
[Start!]
Activating Basic Settings
[CON / DEC / Next]
(This will close the caliper.)
[Done, Go Back!]

The "cornering" on projectors!

NOTE: This function works only activated car produced after July 2007!


[Select]
[09 - Cent. Elect.]
[10 - Coding]
[Long Coding Helper]

Byte 23:
- check Bit2 (Internal Control Tower Light Algorithm s)
- selection to the bit 3-4: 08 Fog Lights Tower Lights Zoom

[Transfer Coding!]
[Do It!]

how to change the alarm sound.


[Select]
[46 - Cent. Conv.]
[10 - Adaptation]

Channel 10: Alarm Horn

Here you choose between 0,1,2,3 bits that you like.

[Save]
[Done, Go Back]

[djalil07gsm]

10000000000000 thanks........