|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
|
11-11-2019, 15:59 | #1 (permalink) |
No Life Poster Join Date: Nov 2008 Location: saudi arabia
Posts: 3,840
Member: 904809 Status: Offline Sonork: 100.1615464 Thanks Meter: 738 | i9190 dead boot [Answered] Welcome to Octoplus Pro JTAG Software version 1.7.7. Started. Reader #0: Generic EMV Smartcard Reader 0 Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB (7456.00 MB) --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/2013 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.5 (for MMC v4.41) Erase block size : 4096 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 128 Kbytes Partition config : (0x00) 00000000 Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3768320 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : d2000000 bytes Device sector size : 512 bytes Partition offset : 344064 Number of sectors : 3072000 Device Manufacturer :samsung Device Platform :msm8960 Build ID :JDQ39 Display Build ID :JDQ39.I9190XXUBNB1 Release ID :4.2.2 Device Model :GT-I9190 Device Name :serrano3gxx Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Build Description :serrano3gxx-user 4.2.2 JDQ39 I9190XXUBNB1 release-keys Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_19_58_28.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: modem (00002000, 0001E000) 60 MB P02: sbl1 (00020000, 00000100) 128 KB P03: sbl2 (00020100, 00000200) 256 KB P04: sbl3 (00020300, 00000400) 512 KB P05: aboot (00020700, 00001000) 2048 KB P06: rpm (00021700, 00000400) 512 KB P07: tz (00021B00, 00000400) 512 KB P08: pad (00021F00, 00006400) 12.5 MB P09: param (00028300, 00004000) 8 MB P10: efs (0002C300, 00006D00) 13.62 MB P11: modemst1 (00033000, 00001800) 3072 KB P12: modemst2 (00034800, 00001800) 3072 KB P13: boot (00036000, 00005000) 10 MB P14: recovery (0003B000, 00005000) 10 MB P15: fota (00040000, 00005000) 10 MB P16: backup (00045000, 000037F0) 6.992 MB P17: fsg (000487F0, 00001800) 3072 KB P18: ssd (00049FF0, 00000010) 8 KB P19: persist (0004A000, 00004000) 8 MB P20: persdata (0004E000, 00006000) 12 MB P21: system (00054000, 002EE000) 1500 MB P22: cache (00342000, 00064000) 200 MB P23: hidden (003A6000, 00006000) 12 MB P24: userdata (003AC000, 00AE2000) 5.441 GB \\ still dead |
11-11-2019, 16:34 | #2 (permalink) |
No Life Poster Join Date: Nov 2008 Location: saudi arabia
Posts: 3,840
Member: 904809 Status: Offline Sonork: 100.1615464 Thanks Meter: 738 | Selected pit file: C:/Users/alkhaleej/Desktop/New folder/i9190_CSB_signed_SERRANO3G_ONEPIT_OPEN_130523.pit Open file "C:/Users/alkhaleej/Desktop/New folder/I9190DXUAMK2_I9190OLBAMK3_I9190DXUAMK2_HOME.tar.md 5". Writing MBR...Done. Writing primary GPT...Done. Writing secondary GPT...Done. Writing PIT Write data verification is enabled. Writing. Please wait... Writing partition MODEM... Done. Writing partition SBL1... Done. Writing partition SBL2... Done. Writing partition SBL3... Done. Writing partition ABOOT... Done. Writing partition RPM... Done. Writing partition TZ... Done. Writing partition BOOT... Done. Writing partition RECOVERY... Done. Writing partition SYSTEM... Done. Writing partition CACHE... Done. Writing partition HIDDEN... Done. Writing is finished. SW: 1.7.7; FW: 1.24. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 2097152 Size : 1024.00 MB --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/1997 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.0 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.0 (for MMC v4.0) Erase block size : 0 Kbytes Boot1 size : 0 Kbytes Boot2 size : 0 Kbytes RPMB size : 0 Kbytes Partition config : (0x00) 00000000 Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Max enhanced data size: 0 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_29_33.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 2097152 Size : 1024.00 MB --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/1997 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.0 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.0 (for MMC v4.0) Erase block size : 0 Kbytes Boot1 size : 0 Kbytes Boot2 size : 0 Kbytes RPMB size : 0 Kbytes Partition config : (0x00) 00000000 Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Max enhanced data size: 0 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_29_38.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 2097152 Size : 1024.00 MB --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/1997 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.0 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.0 (for MMC v4.0) Erase block size : 0 Kbytes Boot1 size : 0 Kbytes Boot2 size : 0 Kbytes RPMB size : 0 Kbytes Partition config : (0x00) 00000000 Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Max enhanced data size: 0 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_29_43.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. Boot config succesfully changed! Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 2097152 Size : 1024.00 MB --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/1997 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.0 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.0 (for MMC v4.0) Erase block size : 0 Kbytes Boot1 size : 0 Kbytes Boot2 size : 0 Kbytes RPMB size : 0 Kbytes Partition config : (0x00) 00000000 Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Max enhanced data size: 0 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_30_16.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. Boot config succesfully changed! Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB (7456.00 MB) --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/2013 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.5 (for MMC v4.41) Erase block size : 4096 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 128 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3768320 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : d2000000 bytes Device sector size : 512 bytes Partition offset : 344064 Number of sectors : 3072000 Device Manufacturer :samsung Device Platform :msm8960 Build ID :JDQ39 Display Build ID :JDQ39.I9190DXUAMK2 Release ID :4.2.2 Device Model :GT-I9190 Device Name :serrano3gdx Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Build Description :serrano3gdx-user 4.2.2 JDQ39 I9190DXUAMK2 release-keys Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_30_40.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: modem (00002000, 0001E000) 60 MB P02: sbl1 (00020000, 00000100) 128 KB P03: sbl2 (00020100, 00000200) 256 KB P04: sbl3 (00020300, 00000400) 512 KB P05: aboot (00020700, 00001000) 2048 KB P06: rpm (00021700, 00000400) 512 KB P07: tz (00021B00, 00000400) 512 KB P08: pad (00021F00, 00006400) 12.5 MB P09: param (00028300, 00004000) 8 MB P10: efs (0002C300, 00006D00) 13.62 MB P11: modemst1 (00033000, 00001800) 3072 KB P12: modemst2 (00034800, 00001800) 3072 KB P13: boot (00036000, 00005000) 10 MB P14: recovery (0003B000, 00005000) 10 MB P15: fota (00040000, 00005000) 10 MB P16: backup (00045000, 000037F0) 6.992 MB P17: fsg (000487F0, 00001800) 3072 KB P18: ssd (00049FF0, 00000010) 8 KB P19: persist (0004A000, 00004000) 8 MB P20: persdata (0004E000, 00006000) 12 MB P21: system (00054000, 002EE000) 1500 MB P22: cache (00342000, 00064000) 200 MB P23: hidden (003A6000, 00006000) 12 MB P24: userdata (003AC000, 00AE2000) 5.441 GB Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB (7456.00 MB) --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/2013 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.5 (for MMC v4.41) Erase block size : 4096 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 128 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3768320 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : d2000000 bytes Device sector size : 512 bytes Partition offset : 344064 Number of sectors : 3072000 Device Manufacturer :samsung Device Platform :msm8960 Build ID :JDQ39 Display Build ID :JDQ39.I9190DXUAMK2 Release ID :4.2.2 Device Model :GT-I9190 Device Name :serrano3gdx Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Build Description :serrano3gdx-user 4.2.2 JDQ39 I9190DXUAMK2 release-keys Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_31_47.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: modem (00002000, 0001E000) 60 MB P02: sbl1 (00020000, 00000100) 128 KB P03: sbl2 (00020100, 00000200) 256 KB P04: sbl3 (00020300, 00000400) 512 KB P05: aboot (00020700, 00001000) 2048 KB P06: rpm (00021700, 00000400) 512 KB P07: tz (00021B00, 00000400) 512 KB P08: pad (00021F00, 00006400) 12.5 MB P09: param (00028300, 00004000) 8 MB P10: efs (0002C300, 00006D00) 13.62 MB P11: modemst1 (00033000, 00001800) 3072 KB P12: modemst2 (00034800, 00001800) 3072 KB P13: boot (00036000, 00005000) 10 MB P14: recovery (0003B000, 00005000) 10 MB P15: fota (00040000, 00005000) 10 MB P16: backup (00045000, 000037F0) 6.992 MB P17: fsg (000487F0, 00001800) 3072 KB P18: ssd (00049FF0, 00000010) 8 KB P19: persist (0004A000, 00004000) 8 MB P20: persdata (0004E000, 00006000) 12 MB P21: system (00054000, 002EE000) 1500 MB P22: cache (00342000, 00064000) 200 MB P23: hidden (003A6000, 00006000) 12 MB P24: userdata (003AC000, 00AE2000) 5.441 GB Boot config succesfully changed! Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB (7456.00 MB) --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/2013 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.5 (for MMC v4.41) Erase block size : 4096 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 128 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3768320 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : d2000000 bytes Device sector size : 512 bytes Partition offset : 344064 Number of sectors : 3072000 Device Manufacturer :samsung Device Platform :msm8960 Build ID :JDQ39 Display Build ID :JDQ39.I9190DXUAMK2 Release ID :4.2.2 Device Model :GT-I9190 Device Name :serrano3gdx Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Build Description :serrano3gdx-user 4.2.2 JDQ39 I9190DXUAMK2 release-keys Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_32_05.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: modem (00002000, 0001E000) 60 MB P02: sbl1 (00020000, 00000100) 128 KB P03: sbl2 (00020100, 00000200) 256 KB P04: sbl3 (00020300, 00000400) 512 KB P05: aboot (00020700, 00001000) 2048 KB P06: rpm (00021700, 00000400) 512 KB P07: tz (00021B00, 00000400) 512 KB P08: pad (00021F00, 00006400) 12.5 MB P09: param (00028300, 00004000) 8 MB P10: efs (0002C300, 00006D00) 13.62 MB P11: modemst1 (00033000, 00001800) 3072 KB P12: modemst2 (00034800, 00001800) 3072 KB P13: boot (00036000, 00005000) 10 MB P14: recovery (0003B000, 00005000) 10 MB P15: fota (00040000, 00005000) 10 MB P16: backup (00045000, 000037F0) 6.992 MB P17: fsg (000487F0, 00001800) 3072 KB P18: ssd (00049FF0, 00000010) 8 KB P19: persist (0004A000, 00004000) 8 MB P20: persdata (0004E000, 00006000) 12 MB P21: system (00054000, 002EE000) 1500 MB P22: cache (00342000, 00064000) 200 MB P23: hidden (003A6000, 00006000) 12 MB P24: userdata (003AC000, 00AE2000) 5.441 GB Repairing from file "C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf". Write data verification is enabled. Writing GPT partition... Done. Writing modem partition... Done. Writing sbl1 partition... Done. Writing sbl2 partition... Done. Writing sbl3 partition... Done. Writing aboot partition... Done. Writing rpm partition... Done. Writing tz partition... Done. Writing pad partition... Done. Writing param partition... Done. Writing efs partition... Done. Writing modemst1 partition... Done. Writing modemst2 partition... Done. Writing boot partition... Done. Writing recovery partition... Done. Writing fota partition... Done. Writing backup partition... Done. Writing fsg partition... Done. Writing ssd partition... Done. Writing persist partition... Done. Writing persdata partition... Done. Writing hidden partition... Done. Smart Repair is successfully complete. SW: 1.7.7; FW: 1.24. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : GT-I9190 SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_GT-I9190_EMMC.srf Voltage : 2.0V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Sandisk eMMC SEM08G Page size : 512 B Block size : 512 B Block count : 15269888 Size : 7.28 GB (7456.00 MB) --------------------------------------------------------------- CID Info CID : 45010053454D303847900713566E5003 Manufacturer ID : 0X45 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : SEM08G Product revision : 9.0 Product serial number : (hex) 713566E Manufacturing date : 05/2013 --------------------------------------------------------------- CSD Info CSD : D00F00320F5903FFFFFFFFFF92404011 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 10 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.5 (for MMC v4.41) Erase block size : 4096 Kbytes Boot1 size : 2048 Kbytes Boot2 size : 2048 Kbytes RPMB size : 128 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x00) RST_n signal is temporary disabled (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 3768320 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : d2000000 bytes Device sector size : 512 bytes Partition offset : 344064 Number of sectors : 3072000 Device Manufacturer :samsung Device Platform :msm8960 Build ID :JDQ39 Display Build ID :JDQ39.I9190DXUAMK2 Release ID :4.2.2 Device Model :GT-I9190 Device Name :serrano3gdx Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Build Description :serrano3gdx-user 4.2.2 JDQ39 I9190DXUAMK2 release-keys Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/SEM08G_11_11_2019_20_33_39.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.7; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: modem (00002000, 0001E000) 60 MB P02: sbl1 (00020000, 00000100) 128 KB P03: sbl2 (00020100, 00000200) 256 KB P04: sbl3 (00020300, 00000400) 512 KB P05: aboot (00020700, 00001000) 2048 KB P06: rpm (00021700, 00000400) 512 KB P07: tz (00021B00, 00000400) 512 KB P08: pad (00021F00, 00006400) 12.5 MB P09: param (00028300, 00004000) 8 MB P10: efs (0002C300, 00006D00) 13.62 MB P11: modemst1 (00033000, 00001800) 3072 KB P12: modemst2 (00034800, 00001800) 3072 KB P13: boot (00036000, 00005000) 10 MB P14: recovery (0003B000, 00005000) 10 MB P15: fota (00040000, 00005000) 10 MB P16: backup (00045000, 000037F0) 6.992 MB P17: fsg (000487F0, 00001800) 3072 KB P18: ssd (00049FF0, 00000010) 8 KB P19: persist (0004A000, 00004000) 8 MB P20: persdata (0004E000, 00006000) 12 MB P21: system (00054000, 002EE000) 1500 MB P22: cache (00342000, 00064000) 200 MB P23: hidden (003A6000, 00006000) 12 MB P24: userdata (003AC000, 00AE3FDF) 5.445 GB still same, |
11-11-2019, 17:10 | #3 (permalink) |
Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest
Posts: 99,919
Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,421 | Hello. If You've tried all repair methods and your device still doesn't power on into Download Mode, most likely your device has HW issue |
Bookmarks |
| |
|