lg g710em strange problem [Answered]

[dave_21]

hi at all i have buy today a medusa pro box for repair this phone.the phone was arrivved in this status: red case on loop ,download mode ok, fastboot ok but boot loop on red case triangle .
After any test write firmware the phone don't go in download mode but also fastboot :-( .today with medusa i write a kdz firmware (usb mode loader),after go in download mode but still same red case... i have download a LG_G710EMW_USB_UFS.srf but i can't write .
if i read partictions error
Partition table has been found on device.
Partition table has been found on device.
Save to C:/Users/Pc Lab/Desktop/bck g7 folder...
Reading partition GPT... Done.
Reading partition mpt...
ERROR[011]: Read error.
At sector 2054
Disconnected.


if i write srf repair give me this error...
Model Settings:
Interface : USB
Brand : LG
Model : G710EMW
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_G710EMW_USB_UFS.srf
Core : Qualcomm SDM845 UFS
Loader : QLoader_v1_LG

Connecting...
Sending loader...OK.
Loader successfully initialized.

INFO: Calling handler for getstorageinfo
INFO: Device Total Logical Blocks: 0xeac800
INFO: Device Block Size in Bytes: 0x1000
INFO: Device Total Physical Partitions: 0x7
INFO: Device Manufacturer ID: 0x198
INFO: Device Serial Number: 0x48494241
INFO: {"storage_info": {"total_blocks":15386624, "block_size":4096, "page_size":4096, "num_physical":7, "manufacturer_id":408, "serial_num":1212760641, "fw_version":"300","mem_type":"UFS","prod_name":"T HGAF8G9T43BAIRB0300"}}
INFO: UFS fInitialized: 0x1
INFO: UFS Current LUN Number: = 0x0
INFO: UFS Total Active LU: 0x7
INFO: UFS wManufacturerID: 0x198
INFO: UFS Boot Partition Enabled: 0x1
INFO: UFS Raw Device Capacity: = 0x7738000
INFO: UFS Min Block Size: 0x8
INFO: UFS Erase Block Size: 0x2000
INFO: UFS Allocation Unit Size: 0x1
INFO: UFS RPMB ReadWrite Size: = 0x40
INFO: UFS Number of Allocation Uint for This LU: 0x3ab2
INFO: UFS Logical Block Size: 0xc
INFO: UFS Provisioning Type: 0x2
INFO: UFS LU Write Protect: 0x0
INFO: UFS Boot LUN ID: = 0x0
INFO: UFS Memory Type: 0x0
INFO: UFS LU Total Blocks: 0xeac800
INFO: UFS Supported Memory Types: 0x801f
INFO: UFS dEnhanced1MaxNAllocU: 0x3b9c
INFO: UFS wEnhanced1CapAdjFac: 0x300
INFO: UFS dEnhanced2MaxNAllocU: = 0x60
INFO: UFS wEnhanced2CapAdjFac: 0x300
INFO: UFS dEnhanced3MaxNAllocU: 0x0
INFO: UFS wEnhanced3CapAdjFac: 0x0
INFO: UFS dEnhanced4MaxNAllocU: 0x0
INFO: UFS wEnhanced4CapAdjFac: 0x0
INFO: UFS LUN Enable Bitmask: 0x7f
INFO: UFS Logical Block Count: 0xeac800
INFO: UFS bConfigDescrLock: 0x0
INFO: UFS iManufacturerName String Index: 0x1
INFO: UFS iProductName String Index: 0x2
INFO: UFS iSerialNumber String Index: 0x3
INFO: UFS iOemID String Index: 0x4
INFO: UFS Inquiry Command Output: TOSHIBA THGAF8G9T43BAIRB0300
ACK
e=false
Device : TOSHIBA THGAF8G9T43BAIRB0300
Core : Qualcomm SDM845 UFS
Page size : 4096 B
Block size : 4096 B
Block count : 15618048
Size : 59.58 GB (61008.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.0.2; FW: 1.24.

Physical partition number: 0

Block count : 15386624 (0xEAC800)
Size : 58.70 GB (60104.00 MB)
P00: GPT (00000000, 00000006) 24 KB
P01: mpt (00000006, 00002000) 32 MB
P02: drm (00002006, 00000E00) 14 MB
P03: sns (00002E06, 00000600) 6 MB
P04: ssd (00003406, 00000080) 512 KB
P05: persist (00003486, 00002000) 32 MB
P06: misc (00005486, 00000100) 1024 KB
P07: ftm (00005586, 00002000) 32 MB
P08: power (00007586, 00002C00) 44 MB
P09: encrypt (0000A186, 00000080) 512 KB
P10: eksst (0000A206, 00000080) 512 KB
P11: rct (0000A286, 00000080) 512 KB
P12: fota (0000A306, 00000A00) 10 MB
P13: srtc (0000AD06, 00000800) 8 MB
P14: pstore (0000B506, 00000200) 2048 KB
P15: els (0000B706, 00001000) 16 MB
P16: carrier (0000C706, 00002800) 40 MB
P17: persdata (0000EF06, 00004000) 64 MB
P18: oem_a (00012F06, 00000800) 8 MB
P19: oem_b (00013706, 00000800) 8 MB
P20: vendor_a (00013F06, 0003E800) 1000 MB
P21: vendor_b (00052706, 0003E800) 1000 MB
P22: system_a (00090F06, 0011B800) 4.43 GB
P23: system_b (001AC706, 0011B800) 4.43 GB
P24: OP_a (002C7F06, 0002C000) 704 MB
P25: OP_b (002F3F06, 0002C000) 704 MB
P26: userdata (0031FF06, 00B8C8F4) 46.2 GB
P27: grow (00EAC7FA, 00000001) 4 KB

Physical partition number: 1

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl_a (00000006, 00000380) 3584 KB
P02: xbl_config_a (00000386, 00000020) 128 KB

Physical partition number: 2

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl_b (00000006, 00000380) 3584 KB
P02: xbl_config_b (00000386, 00000020) 128 KB

Physical partition number: 3

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: ALIGN_TO_128K_1 (00000006, 0000001A) 104 KB
P02: cdt (00000020, 00000020) 128 KB
P03: ddr (00000040, 00000100) 1024 KB

Physical partition number: 4

Block count : 221184 (0x36000)
Size : 864.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: aop_a (00000006, 00000080) 512 KB
P02: tz_a (00000086, 00000200) 2048 KB
P03: hyp_a (00000286, 00000080) 512 KB
P04: modem_a (00000306, 0000B600) 182 MB
P05: mdtpsecapp_a (0000B906, 00000400) 4 MB
P06: mdtp_a (0000BD06, 00002000) 32 MB
P07: abl_a (0000DD06, 00000100) 1024 KB
P08: dsp_a (0000DE06, 00002000) 32 MB
P09: keymaster_a (0000FE06, 00000080) 512 KB
P10: akmu_a (0000FE86, 00000080) 512 KB
P11: boot_a (0000FF06, 00004000) 64 MB
P12: cmnlib_a (00013F06, 00000080) 512 KB
P13: cmnlib64_a (00013F86, 00000080) 512 KB
P14: devcfg_a (00014006, 00000020) 128 KB
P15: qupfw_a (00014026, 00000020) 128 KB
P16: laf_a (00014046, 00003000) 48 MB
P17: vbmeta_a (00017046, 00000010) 64 KB
P18: dtbo_a (00017056, 00000800) 8 MB
P19: storsec_a (00017856, 00000020) 128 KB
P20: raw_resources_a (00017876, 00000800) 8 MB
P21: sid_a (00018076, 00000080) 512 KB
P22: aop_b (000180F6, 00000080) 512 KB
P23: tz_b (00018176, 00000200) 2048 KB
P24: hyp_b (00018376, 00000080) 512 KB
P25: modem_b (000183F6, 0000B600) 182 MB
P26: mdtpsecapp_b (000239F6, 00000400) 4 MB
P27: mdtp_b (00023DF6, 00002000) 32 MB
P28: abl_b (00025DF6, 00000100) 1024 KB
P29: dsp_b (00025EF6, 00002000) 32 MB
P30: keymaster_b (00027EF6, 00000080) 512 KB
P31: akmu_b (00027F76, 00000080) 512 KB
P32: boot_b (00027FF6, 00004000) 64 MB
P33: cmnlib_b (0002BFF6, 00000080) 512 KB
P34: cmnlib64_b (0002C076, 00000080) 512 KB
P35: devcfg_b (0002C0F6, 00000020) 128 KB
P36: qupfw_b (0002C116, 00000020) 128 KB
P37: laf_b (0002C136, 00003000) 48 MB
P38: vbmeta_b (0002F136, 00000010) 64 KB
P39: dtbo_b (0002F146, 00000800) 8 MB
P40: storsec_b (0002F946, 00000020) 128 KB
P41: raw_resources_b (0002F966, 00000800) 8 MB
P42: sid_b (00030166, 00000080) 512 KB
P43: sec (000301E6, 00000040) 256 KB
P44: devinfo (00030226, 00000040) 256 KB
P45: dip (00030266, 00000100) 1024 KB
P46: apdp (00030366, 00000080) 512 KB
P47: msadp (000303E6, 00000080) 512 KB
P48: spunvm (00030466, 00000800) 8 MB
P49: limits (00030C66, 00000001) 4 KB
P50: toolsfv (00030C67, 00000100) 1024 KB
P51: logfs (00030D67, 00000800) 8 MB
P52: sti (00031567, 00000200) 2048 KB
P53: logdump (00031767, 00004000) 64 MB

Physical partition number: 5

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: ALIGN_TO_128K_2 (00000006, 0000001A) 104 KB
P02: modemst1 (00000020, 00000200) 2048 KB
P03: modemst2 (00000220, 00000200) 2048 KB
P04: fsg (00000420, 00000200) 2048 KB
P05: fsc (00000620, 00000080) 512 KB
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/TOSHIBA THGAF8G9T43BAIRB0300 _modemst1_0x20_0x200_14_01_2020_20_30_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.0.2; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/TOSHIBA THGAF8G9T43BAIRB0300 _modemst2_0x220_0x200_14_01_2020_20_30_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.0.2; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/TOSHIBA THGAF8G9T43BAIRB0300 _fsg_0x420_0x200_14_01_2020_20_30_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.0.2; FW: 1.24.

Physical partition number: 6

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: frp (00000006, 00000200) 2048 KB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_G710EMW_USB_UFS.srf".
Write data verification is enabled.

Physical partition number: 0
Writing GPT partition...
Read verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
i can also write a tot or kdz file:-(
any help???

[Octopus box]

Write data verification is enabled.

Read verification error 1. Possible reasons: damaged or write protected eMMC.

Hello.

Please, try to disable "Write data verification" option, after repeat operation again, then post here full Software log

[dave_21]

ok ihave disable write data and verification option and now start but blocked on flash vendor...if i disable vendor a and b the repair start and no error but after full flash with lg suite same red case error .
Not resolve ...
we can compile a repair file for g710em not emw ...now lg suite read a phone with g710emw and imei 000000000000 ????

[dave_21]

Welcome to Octoplus/Octopus Box LG Software version 2.9.7.01
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM318
Selected model: G710EM
Reading info...
Model ID: LM-G710EMWG710EMW10d
IMEI: 000000-00-000000-0
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: sdm845
SW version:
Android version: 8.0.0
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Performed by 2.9.7.01 Software version.
--------------------------------------------------------------------------------

[dave_21]

Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_G710EMW_USB_UFS.srf".
Write data verification is disabled.

Physical partition number: 0
Writing GPT partition... Done.

Physical partition number: 0
Writing mpt partition... Done.

Physical partition number: 0
Writing drm partition... Done.

Physical partition number: 0
Writing sns partition... Done.

Physical partition number: 0
Writing ssd partition... Done.

Physical partition number: 0
Writing persist partition... Done.

Physical partition number: 0
Writing misc partition... Done.

Physical partition number: 0
Writing ftm partition... Done.

Physical partition number: 0
Writing power partition... Done.

Physical partition number: 0
Writing encrypt partition... Done.

Physical partition number: 0
Writing eksst partition... Done.

Physical partition number: 0
Writing rct partition... Done.

Physical partition number: 0
Writing fota partition... Done.

Physical partition number: 0
Writing srtc partition... Done.

Physical partition number: 0
Writing pstore partition... Done.

Physical partition number: 0
Writing els partition... Done.

Physical partition number: 0
Writing carrier partition... Done.

Physical partition number: 0
Writing persdata partition... Done.

Physical partition number: 0
Writing oem_a partition... Done.

Physical partition number: 0
Writing oem_b partition... Done.

Physical partition number: 0
Writing vendor_a partition... Failed reading UFS_wExceptionEventStatus Attribute.
Disconnected.

[dave_21]

But our loader open Also LUN0 partiction on ufs??? And damage or cancel devinfo , Ssd and ddr partition ? We can see please?