Octoplus JTAG Software v.1.8.3 is out!

[Gsmserver]

Octoplus JTAG Software v.1.8.3 is out!

We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).

Octoplus Box JTAG Software v.1.8.3 Release Notes

• Added support for the following models:

- LG D851 - added Dead Boot / Device Repair via USB
- LG D620 - added Dead Boot Repair via USB
- LG D620K - added Dead Boot Repair via USB
- LG D620R - added Dead Boot Repair via USB
- ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)

• Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.3

Find out more at: www.octoplusbox.com

[unlock.mk]

install_Octoplus_JTAG_1.8.3.exe

is corrupted, it can not be installed. Please reupload.
It is just 30mb and should be 294 Mb

[Octopus box]

Yes, thanks for your report, we will fix this. Here are alternative links for You:

https://drive.google.com/file/d/0B_k...ew?usp=sharing,
https://mega.co.nz/#!K5YjzCoJ!dGPB_r...EaXpF8XBF3bsHc

Also, You can download installer via Octoplus Shell.

[beto251172]

Can someone please make a backup of the boot to LG D280F?

[excessive]

Hi guys,

I can't fine the file LG_D851_repair.mf

Where to download it?

Thanks,
X4ce