s5830 write full bin done but still dead [Solved]
 

Welcome to Octoplus JTAG Box Software version 1.9.5.4
Connecting to server
Retrieving files list
Downloading file "C:\Program Files\Octoplus\Octoplus_JTAG\Firmware\Samsung_GTS5 830_FullFlash.rar"...
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.12V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.55 V
CPU : Qualcomm MSM7227T
Core ID : 303C10E1
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Opening "C:\Program Files\Octoplus\Octoplus_JTAG\Firmware\Samsung_GTS5 830_FullFlash.bin" file...
Writing BOOT section. Please wait... Done
Writing EFS section. Please wait... Done
Writing APPBOOT section. Please wait...
ERROR[018]: Logical block operation failed at 45968 Kb (Hex address 0x02CE4000). Reason: Connection lost.
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.14V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
MI: Medusa JTAG init failed.
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.41V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
MI: Medusa JTAG init failed.
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.50V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.21V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
ERROR[032]: Target device Core has disabled JTAG/EmbeddedICE.
ERROR[000]: Unable to halt core.
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.55 V
CPU : Qualcomm MSM7227T
Core ID : 303C10E1
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait...
ERROR[015]: Block operation failed. Block 0.
Disconnected
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.64V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7227T
Core ID : 303C10E1
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Disconnected
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.66V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.56 V
CPU : Qualcomm MSM7227T
Core ID : 303C10E1
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\Octoplus\Octoplus_JTAG\Firmware\Samsung_GTS5 830_FullFlash.bin" file...
Writing BOOT section. Please wait...
ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Connection lost.
Disconnected
Selected device model: Samsung GT-S5830
Connecting. Please wait...
Checking data...
VREF = 1.73V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.16.
Detected TAP ID: 303C10E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.55 V
CPU : Qualcomm MSM7227T
Core ID : 303C10E1
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Connect successful.
ECC Mode enabled.
Opening "C:\Program Files\Octoplus\Octoplus_JTAG\Firmware\Samsung_GTS5 830_FullFlash.bin" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done
Disconnected



mobile dead after flashing custom rom

was working fine before attempt custom rom

Hello.

Try to connect the phone in Advanced Mode, make Erase Full flash (if this feature will be active for this device) and then try to write Full flash again. Post here the result.

Also, please look here:

http://forum.gsmhosting.com/vbb/f664.../#post10898860,
http://forum.gsmhosting.com/vbb/f664.../#post12462020,
http://forum.gsmhosting.com/vbb/f664.../#post11873506,
http://forum.gsmhosting.com/vbb/f664...1/#post9958362,
http://forum.gsmhosting.com/vbb/f664...5/#post9875847.

Thank you mobile alive now