FRP failed [Solved] - GSM-Forum

mr_basel_99 · 02-23-2021, 19:54

Work ID: 0000000000A12568
Checking data...OK
Platform: LG Qualcomm
Selected port: COM9
Selected model: Q720QM
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...
Model ID: LM-Q720CS
IMEI: 355691-10-*******
Android version: 9
Battery level: 58%
Mode: Emergency
Initializing flash...OK
Platform: msm8953
SW version: LMQ720CSAT-01-V10n-310-150-FEB-04-2020-ARB00+0
Android version: 9
LAF Version: 1.1
Product ID: VS02S191216000853
IMEI: 355691-10-*******-3
Target operator: LAO
Hardware: rev_10
Reading partitions...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: roberto1
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 200 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Backup saved to "Q720QM_355691********_23-02-2021_21-50-02.oct"
Reading partitions...OK
Prepairing for change protect status...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Power phone OFF and put it to Download mode.
3. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Failed!
Performed by 3.1.0 Software version.

Octopus box · 02-24-2021, 17:01

Hello.

We added You one more attempt. Please, try to repeat Reset FRP operation again and post here result.

mr_basel_99 · 02-28-2021, 01:00

I did it with the FRP tool and it went through , thanks for the refund

02-23-2021, 19:54	#1 (permalink)
mr_basel_99 Freak Poster Join Date: Jan 2014 Location: WhereEver Posts: 225 Member: 2109940 Status: Offline Thanks Meter: 490	FRP failed [Solved] Work ID: 0000000000A12568 Checking data...OK Platform: LG Qualcomm Selected port: COM9 Selected model: Q720QM Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)). Reading info... Model ID: LM-Q720CS IMEI: 355691-10-***** Android version: 9 Battery level: 58% Mode: Emergency Initializing flash...OK Platform: msm8953 SW version: LMQ720CSAT-01-V10n-310-150-FEB-04-2020-ARB00+0 Android version: 9 LAF Version: 1.1 Product ID: VS02S191216000853 IMEI: 355691-10-***-3 Target operator: LAO Hardware: rev_10 Reading partitions...OK Connecting to server...OK Octopus smart card is present. Checking smart card...OK Username: roberto1 Authorizing...OK Checking balance...OK Checking operation...OK Sending device information...OK Get credits, needed for current operation...OK Your balance: 200 credits. To perform "Reset FRP" operation you need to have 100 credits. Backup saved to "Q720QM_355691******_23-02-2021_21-50-02.oct" Reading partitions...OK Prepairing for change protect status... Reconnecting phone... Please, perform the following steps: 1. Disconnect cable. 2. Power phone OFF and put it to Download mode. 3. Connect the cable then press "OK" button. Note: If "Ok" button isn't active, then You should reconnect device! Failed! Performed by 3.1.0 Software version.

02-28-2021, 01:00	#3 (permalink)
mr_basel_99 Freak Poster Join Date: Jan 2014 Location: WhereEver Posts: 225 Member: 2109940 Status: Offline Thanks Meter: 490	done I did it with the FRP tool and it went through , thanks for the refund

02-24-2021, 17:01	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. We added You one more attempt. Please, try to repeat Reset FRP operation again and post here result.