LG X230Ds flash error [Solved] - GSM-Forum

Burini · 03-25-2018, 05:22

LG X230Ds..Flash error

Log
Welcome to Octoplus/Octopus Box LG Software version 2.8.0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM6
Selected baudrate: 115200
Selected model: X230DS
Selected USB connection type
Press and hold "Vol-" and connect cable.OK
Phone found.
CPU name: MT6737M
CPU revision: 8A00.CB00.0000.0000
Prepairing loader...OK
Sending loader...OK
Synchronizing with loader...
Detecting flash chip...OK
Detecting EMMC flash chip...OK
Reading info...OK
Reading partitions...Failed!
Error code: PQLNVCFREW
Opening "X230DS_V10A_VIVO.oct"...
Writing Firmware...
Reading partitions...Failed!
Error code: PQLNVCFREW
Performed by 2.8.0 Software version.

NST-Thina · 03-25-2018, 05:35

Service the motherboard and heat the board and the CPU IC then Flash again 100% its worked

Octopus box · 03-25-2018, 12:47

@ Burini

Hello.

What is the state/problem of your phone exactly? Why You have decided to write firmware?

Such error means, that it is not possible to read our data from the phone's flash chip, usually this means, that device has HW problem.

Burini · 03-25-2018, 22:02

Quote:

Originally Posted by Octopus box

@ Burini

Hello.

What is the state/problem of your phone exactly? Why You have decided to write firmware?

Such error means, that it is not possible to read our data from the phone's flash chip, usually this means, that device has HW problem.

the phone has no hardware problems, I made a copy of the system, it was 100% working, after the copy with LG module he did not call anymore and no longer writes the system, the copy was done via USB cable with LG module octopus activated on Medusa

Octopus box · 03-26-2018, 05:37

What do You mean under "I made a copy of the system"? Have You read Full flash or what? Reading Full flash from the phone doesn't touch/change any data in the device, so reading of Full flash can't be the cause of this problem. Anyway, post here Full software log with all of performed operations with the device, we will check.

Burini · 03-26-2018, 17:03

Quote:

Originally Posted by Octopus box

What do You mean under "I made a copy of the system"? Have You read Full flash or what? Reading Full flash from the phone doesn't touch/change any data in the device, so reading of Full flash can't be the cause of this problem. Anyway, post here Full software log with all of performed operations with the device, we will check.

already recovered the device, through the flashtool and imei rewritten with medusa pro LG activated
This is my cell phone 100%.
Thanks for your response

03-25-2018, 05:22	#1 (permalink)
Burini Banned Join Date: Oct 2015 Location: Brasil Posts: 50 Member: 2476261 Status: Offline Sonork: 1674003 Thanks Meter: 9	LG X230Ds flash error [Solved] LG X230Ds..Flash error Log Welcome to Octoplus/Octopus Box LG Software version 2.8.0 -------------------------------------------------------------------------------- Checking data...OK Platform: LG MTK Selected port: COM6 Selected baudrate: 115200 Selected model: X230DS Selected USB connection type Press and hold "Vol-" and connect cable.OK Phone found. CPU name: MT6737M CPU revision: 8A00.CB00.0000.0000 Prepairing loader...OK Sending loader...OK Synchronizing with loader... Detecting flash chip...OK Detecting EMMC flash chip...OK Reading info...OK Reading partitions...Failed! Error code: PQLNVCFREW Opening "X230DS_V10A_VIVO.oct"... Writing Firmware... Reading partitions...Failed! Error code: PQLNVCFREW Performed by 2.8.0 Software version. Last edited by Octopus box; 03-26-2018 at 18:51.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2018, 05:35	#2 (permalink)
NST-Thina Freak Poster Join Date: Apr 2015 Location: @kilinochchi, Sri Lanka Posts: 128 Member: 2372779 Status: Offline Sonork: 100.1680276 Thanks Meter: 33	Service the motherboard and heat the board and the CPU IC then Flash again 100% its worked

03-25-2018, 12:47	#3 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,809 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	@ Burini Hello. What is the state/problem of your phone exactly? Why You have decided to write firmware? Such error means, that it is not possible to read our data from the phone's flash chip, usually this means, that device has HW problem.

03-26-2018, 05:37	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,809 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	What do You mean under "I made a copy of the system"? Have You read Full flash or what? Reading Full flash from the phone doesn't touch/change any data in the device, so reading of Full flash can't be the cause of this problem. Anyway, post here Full software log with all of performed operations with the device, we will check.