lm-x430emw unlock done - GSM-Forum

mazagangi2 · 07-09-2020, 14:41

Welcome to Octoplus/Octopus Box LG Software version 3.0.2.03
Card S/N : 0000066F88
--------------------------------------------------------------------------------

Checking data...OK
Platform: LG MTK
Selected port: COM3
Selected baudrate: 921600
Selected model: X430EMW
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM84
Mode: Emergency
Initializing flash...OK
Model ID: LM-X430EMW
Platform: mt6765
Android version: 9
SW version: LMX430EMWAT-64-V10j-EEA-XX-MAY-07-2020+0
LAF Version: 1.1
Product ID: 02PGBJ42FE7U003BT
IMEI: 358854-10-435931-8
Target operator: LAO
Hardware: rev_10
Battery level: 43%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 358854-10-435931-8
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.

Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: maza****
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Writing security area...
Initializing flash...OK
Writing security area...OK
Initializing flash...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact with
Support via Skype or create thread at forum!
Performed by 3.0.2.03 Software version.

07-09-2020, 14:41	#1 (permalink)
mazagangi2 Freak Poster Join Date: Jan 2014 Posts: 122 Member: 2117064 Status: Offline Thanks Meter: 34	lm-x430emw unlock done Welcome to Octoplus/Octopus Box LG Software version 3.0.2.03 Card S/N : 0000066F88 -------------------------------------------------------------------------------- Checking data...OK Platform: LG MTK Selected port: COM3 Selected baudrate: 921600 Selected model: X430EMW Selected USB connection type Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor) or Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable. Phone found at port COM84 Mode: Emergency Initializing flash...OK Model ID: LM-X430EMW Platform: mt6765 Android version: 9 SW version: LMX430EMWAT-64-V10j-EEA-XX-MAY-07-2020+0 LAF Version: 1.1 Product ID: 02PGBJ42FE7U003BT IMEI: 358854-10-435931-8 Target operator: LAO Hardware: rev_10 Battery level: 43% Reading partitions...OK LAF Error: 80000119. Checking security...OK -------------------------------------------------------------------------------- IMEI A: 358854-10-435931-8 IMEI B: Bad Bluetooth address: Unknown Wi-Fi MAC address: Unknown -------------------------------------------------------------------------------- Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk. Continue? Connecting to server...OK Octopus smart card is present. Checking smart card...OK Username: maza**** Checking balance...OK Checking operation...OK Sending device information...OK Get credits, needed for current operation...OK Your balance: 100 credits. To perform "Unlock" operation you need to have 100 credits. Unlocking...OK Writing security area... Initializing flash...OK Writing security area...OK Initializing flash...OK Prepairing for change protect status... Initializing flash...OK Removing write protection...OK Initializing flash...OK Reading partitions...OK Erasing part 1...OK Initializing flash...OK Erasing part 2...OK Initializing flash...OK Prepairing for change protect status... Initializing flash...OK Restore write protection...OK Initializing flash...OK Reading partitions...OK Phone successfully unlocked! Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum! Performed by 3.0.2.03 Software version.