GSM-Forum - 🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Octopus LG/Octoplus LG (https://forum.gsmhosting.com/vbb/f799/)

- - 🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙 (https://forum.gsmhosting.com/vbb/f799/octoplus-octopus-box-lg-software-2-9-1-out-2531996/)

🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙

http://gsmserver.com/nfs/content/6149/file/plus_cap.png

Octoplus/Octopus Box LG Software version 2.9.1 is out!
Added custom flashing and more!

Octoplus/Octopus Box LG Software v.2.9.1 Release Notes:

🐙 Released custom flashing possibility for MTK and Qualcomm CPU-based devices (supported "*.dz", "*.kdz", "*.oct" firmwares with LAF partition). From now on, you can select firmware file, select (mark) partitions that you want to write, and write only these selected partitions! Also, added possibility to skip formatting Userdata before flashing firmware.

The sequence of writing firmware:

Select firmware file.

Press "Write firmware" button.

Connect the device (put it into Download Mode) according to Software instructions (prompts).

In the appearing window select (mark) necessary partitions that you want to write, and press "Write" button.

Skip or allow formatting Userdata and continue the operation.

🐙 Added support for the following models:

- G710PM - added Write Firmware ("*.kdz", "*.oct"), Read/Write QCN, Read/Write NVM, Reset FRP (via TP) (thanks to Mr. ahmertelecom)
- LMX410EO - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410EOW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410FC - added Read Codes (works for Android 7.x firmware only), Write Firmware (thanks to Mr. maxpatri9)
- LMX410FO - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410NCW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410YCW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- F750K - added Factory Reset (thanks to Mr. lerner_)

🐙 Improved "Unlock" operation for M153.

🐙 Improved "Write EEPROM" operation for MTK CPUs-based devices.

🐙 All supported operations are described in details in Software manual ("Cable & Manual" button in Software)

Download Octoplus/Octopus Box LG v.2.9.1

Find out more at: www.octoplusbox.com

Plz add ak495 tablet for unlock

No more words for @Octopus Team

Only can do Congratulation for this other Big Update :)

Quote:

🐙 Released custom flashing possibility for MTK and Qualcomm CPU-based devices (supported "*.dz", "*.kdz", "*.oct" firmwares with LAF partition). From now on, you can select firmware file, select (mark) partitions that you want to write, and write only these selected partitions! Also, added possibility to skip formatting Userdata before flashing firmware.

The Best LG Team in the Market.

BR
allumts

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

Custom flashing,
This feature will, for sure, perfectionate the tool..
Thanks so much :) .

Octoplus/Octopus Box team

very very big like

Thanks

Please add unlock LG-G710PM Sprint!!!

Quote:

Originally Posted by Hacker84 (Post 13463097)

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

What the error You get exactly? Create new thread and post there full Software log with all of performed operations, we will check.

Quote:

Originally Posted by Hacker84 (Post 13463097)

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

Remember sir, ATT, Cricket and Sprint/Boost Mobile host lg KDZ firmwares on their own servers, u cant flash TOT files on these devices

so, can I read older modem and carrier partitions from a phone and write to a newest one?
Will be great for Sprint Lg phones with new security for unlock...

For What is LAF Partition?? What happens if I flash an LG Rom without this partition? Who evades LAF?

Quote:

Originally Posted by luisy (Post 13463315)

so, can I read older modem and carrier partitions from a phone and write to a newest one?
Will be great for Sprint Lg phones with new security for unlock...

Im trying right now with ls777 trying to write modem and carrier extracted from ZV6 and get error flashing desired partitions also after that phone stuck in download mode

Code:



--------------------------------------------------------------------------------

Checking data...OK

Platform: LG Qualcomm

Selected port: COM115

Selected model: LS777

Reading info...

IMEI: 350305-26-XXXXX-4

Android version: 7.0

Battery level: 83%

Mode: Emergency

Initializing flash...OK

Platform: msm8937

SW version: LS777ZV9_00

Android version: 7.0

LAF Version: 1.1

Product ID: BS01S170726000284

IMEI: 354234-08-518370-2

Target operator: SPR

Hardware: rev_10

Opening "LS777ZV6_03.tot"...OK

Firmware version: LS777ZV6

Firmware model: LG-LS777

--------------------------------------------------------------------------------

Writing phone firmware without real necessity is at your own risk.
 

Downgrade may lead to phone damage!
 

Please, make sure the phone's battery is fully charged.

Disconnect all other devices from the computer (including phones, 

modems, etc.) and close all other running programs.

To avoid errors in the flashing process, use a clean PC (without any 

installed drivers for other Qualcomm-based devices).

You should not run any other programs or attach new devices to your 

computer during the flashing!

--------------------------------------------------------------------------------

Prepairing firmware...OK

Selecting firmware partitions...OK

Setting options...OK

Do you want to format User Data?

Reading partitions...OK
 Writing 2/6 modem...Failed!

Performed by 2.9.1 Software version.

UPDATE: i was able to get out of download mode doing "screen lock reset with z3x"

Second try with ZV7 partitions but get same error

NOTE: im trying this at my own risk, long time i was waiting an update like this bu for my bad no work as i expected but any way is a GREAT UPDATE from Octoplus team.

Im gonna still trying with ls777, got many pieces with different versions from ZV9 to ZVF, already done many pieces via EMMC with medusa pro, this update give me some hope to avoid keep burning my eyes jejejejeje

what about LG- LMX410ASR ? pls. add tnx

Hi

LG SP200 flash ''SP20013b_to_X210ULMA10d_for_unlock'' OK, hang logo LG K8+

Quote:

Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Selecting firmware partitions...OK
Selected default partitions!
Reading partitions...OK
Do you want to format User Data?
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.9.1 Software version

Writing EEPROM bakup ok, still hang logo LG K8+

Quote:

Checking data...OK
Platform: LG MTK
Selected port: COM56
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM317
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_3519800955xxxx_30-10-2018_17-59-38.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.9.1 Software version

Hard reset volume + and power still hang logo