Zong E8372h-153 new security update 21.333.64.00.1456
 

All expert please tell us about unlock procedure of new security update from zong e8372h-153 21.333.64.00.1456.thanks in advance

https://ibb.co/FzjFCpq

ALSO SEE IN PICTURE

Found modem : E8372
Model : Huawei AuthVer 4 modem (New)
IMEI : XXXXXXXXXXX
Serial NR. : B7Z7S17921006814
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.1456_RE5
Web UI version : WEBUI_17.100.20.01.1456_RE5
SIM Lock status : unlocked
Wrong codes entered : 10 (unlock attempts left : 0)


After Flash Dead. don't flash unlock file.

Hello,

try: E8372h-153_Update_21.327.62.00.1460_WEBUI_18.100.06.17.14 56_RE5_U_ATF_Maximum_dinis.ru.exe.

after flashing dinis file device will dead

here is 21.328.62.00.1456 unlock file signed to flash on latest
e8372 21.33.64.00.1456 but this is not tested yet

ZONG_E8372_21.333.64.00.1456_U


plz comment below if this will work

OH :confused:

sorry, i don't know , i think it can work. but have you USBLOADER for new e8372 efuse enabled ? to unrick device.

no i dont have this version device

dont try this, after flash dead.


http://forum.gsmhosting.com/vbb/f804...456-a-2582475/ dead


i have try a old usbloader but not work.

i have try this file, after get dead not boot. i try to flash usbloader but i think all not work on new security.

e5573cs 21.333.64.00.1456 also dead after flashing 21.329.63.00.1456:(

now,
we need NEW USBLOADER.bin for E8372h to unbrick the modem with efuse enabled.

i need firmware this file someone share tested File

Zong 4G BOLT+ 5573cs-322 Latest
21.333.64.01.1456 21.333.64.02.1456

After unlocking Zong E5573Cs-322 got a new update, then the modem updated to 21.33x.xx and got locked again, I missed with it flashing some files, and got only RED led mode, the version before update was 21.22x.xx not sure exactly, and many users reported about that issue.
When you try to load the boot-loader using Balong Flasher you got error in Russian means "Modem rejected the packs".
I've attached the photos of Balong after correcting the Charset to be compatible with Balong running one.
https://drive.google.com/file/d/0B-Z...ew?usp=sharing

Does anyone have a usb loader E8372 new version here?