OT-5020T flash Error: S_SECURITY - GSM-Forum

naizer · 07-19-2016, 06:41

Action : Boot Info.
Selected Alcatel:OT-5020T
Exe version: NCKBox AndroidMTK 1.8.7.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM40)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
----------------------------------------------------
EMMC: (29Gb+0Kb) MICRON 0x503058585858
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: FE014E50305858 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9300000 [3.644 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM38)
Build ID: JZO54K
Display ID: L3UMI2
Version: 4.1.2
Build Date: Sun Aug 18 17:21:15 CST 2013
Build Date: 1376817675
Model: ALCATEL ONE TOUCH 5020T
Brand: TCT
Device: Megane
Manufacturer: TCT
Region: US

Mediatek Version Release: ALPS.JB.MP.V1.43
MODEL FROM PROINFO: 5020T-2ATBUS1
SECRO FROM PROINFO: X2L0UM02AB00
OTP IMEI: 013778003256175
Wait untill phone will start charging.
All done.

Flash files count is :19
Action : Firmware update.
Selected Model: Alcatel:
Exe version: NCKBox AndroidMTK 1.8.7.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM40)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
----------------------------------------------------
EMMC: (29Gb+0Kb) MICRON 0x503058585858
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: FE014E50305858 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9300000 [3.644 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM38)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Error: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOU ND
Wait untill phone will start charging.
All done

please help need

naizer · 07-19-2016, 07:06

flash ok use support suite flash file thanks nck team

Flash files count is :19
Action : Firmware update.
Selected Model: Alcatel: OT-5020T
Exe version: NCKBox AndroidMTK 1.8.7.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM40)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
----------------------------------------------------
EMMC: (29Gb+0Kb) MICRON 0x503058585858
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: FE014E50305858 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9300000 [3.644 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM38)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

**orbita** · 07-19-2016, 10:23

Yes, for this phone need to use factory file.
It's protected phone.

07-19-2016, 06:41	#1 (permalink)
naizer No Life Poster Join Date: Aug 2007 Location: earth Posts: 905 Member: 570373 Status: Offline Thanks Meter: 236	OT-5020T flash Error: S_SECURITY Action : Boot Info. Selected Alcatel:OT-5020T Exe version: NCKBox AndroidMTK 1.8.7.1 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MTK USB Port (COM40) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6575_S01 BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : 00 ---------------------------------------------------- INT RAM: 128 KB SDRAM ---------------------------------------------------- EMMC: (29Gb+0Kb) MICRON 0x503058585858 EMMC FW VERSION: 10:00:00:00:00:00:00:00 EMMC CID: FE014E50305858 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9300000 [3.644 GB] Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM38) Build ID: JZO54K Display ID: L3UMI2 Version: 4.1.2 Build Date: Sun Aug 18 17:21:15 CST 2013 Build Date: 1376817675 Model: ALCATEL ONE TOUCH 5020T Brand: TCT Device: Megane Manufacturer: TCT Region: US Mediatek Version Release: ALPS.JB.MP.V1.43 MODEL FROM PROINFO: 5020T-2ATBUS1 SECRO FROM PROINFO: X2L0UM02AB00 OTP IMEI: 013778003256175 Wait untill phone will start charging. All done. Flash files count is :19 Action : Firmware update. Selected Model: Alcatel: Exe version: NCKBox AndroidMTK 1.8.7.1 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MTK USB Port (COM40) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6575_S01 BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : 00 ---------------------------------------------------- INT RAM: 128 KB SDRAM ---------------------------------------------------- EMMC: (29Gb+0Kb) MICRON 0x503058585858 EMMC FW VERSION: 10:00:00:00:00:00:00:00 EMMC CID: FE014E50305858 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9300000 [3.644 GB] Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM38) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Flash EMMC Algo Start. Preloader backup already exist, skip saving. Starting flash. Error: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOU ND Wait untill phone will start charging. All done please help need Last edited by naizer; 07-19-2016 at 06:49.

07-19-2016, 07:06	#2 (permalink)
naizer No Life Poster Join Date: Aug 2007 Location: earth Posts: 905 Member: 570373 Status: Offline Thanks Meter: 236	flash ok use support suite flash file thanks nck team Flash files count is :19 Action : Firmware update. Selected Model: Alcatel: OT-5020T Exe version: NCKBox AndroidMTK 1.8.7.1 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MTK USB Port (COM40) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6575_S01 BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : 00 ---------------------------------------------------- INT RAM: 128 KB SDRAM ---------------------------------------------------- EMMC: (29Gb+0Kb) MICRON 0x503058585858 EMMC FW VERSION: 10:00:00:00:00:00:00:00 EMMC CID: FE014E50305858 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9300000 [3.644 GB] Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM38) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Flash EMMC Algo Start. Preloader saved in firmware directory. Starting flash. Download firmware to flash now... Wait untill phone will start charging. All done.

07-19-2016, 10:23	#3 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Yes, for this phone need to use factory file. It's protected phone.