read code CAG-L03 latest security patch done [USER REPORT] ★★★★★ - GSM-Forum

pavonc · 03-03-2020, 16:50

Exe version: NCKBox AndroidMTK
Selected model: Huawei Ascend Y5 Lite [CAG_L03]
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM39)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E36324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM71)
IMEI[1]: 8683560328
IMEI[2]: 8683560328
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 4401241935084193
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:10) Code :
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[5944]Unlocking target...please wait
Error to process_sml NCK(2)
Error to process_sml NCK(2)
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.

03-03-2020, 16:50	#1 (permalink)
pavonc Freak Poster Join Date: Jan 2014 Location: developer world Posts: 254 Member: 2117327 Status: Offline Thanks Meter: 48	read code CAG-L03 latest security patch done [USER REPORT] ★★★★★ Exe version: NCKBox AndroidMTK Selected model: Huawei Ascend Y5 Lite [CAG_L03] Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM39) Boot mode: Preloader BBCHIP: 335 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6737M BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 02 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42 EMMC FW VERSION: 06:00:00:00:00:00:00:00 EMMC CID: 150100464E36324D42 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM71) IMEI[1]: 8683560328 IMEI[2]: 8683560328 Reading security, wait... SIM[1]: Block1(N): Locked (remain:10) Code : 4401241935084193 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Unlocked (remain:10) Code : Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [5944]Unlocking target...please wait Error to process_sml NCK(2) Error to process_sml NCK(2) [0]Unlock finished. [1]Unlock finished. CHK updated ok. Wait untill phone will start charging. [0]All done.