Tecno Xiami Redmi stuck on logo done [SUCCESS REPORT] ★★★★★★

[kumusha37]

Action : Format UserData.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.6
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6583 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6589
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SAMSUNG 0x4b3557564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3557564D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9480000 [3.645 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM9)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: CACHE begin: 0x2d180000 length: 0x7e00000
Partition: USRDATA begin: 0x34f80000 length: 0x80000000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
[0]All done.

Thanks team