Solutions for "SIM Not supported " 2022 - GSM-Forum

**kinglock** · 10-05-2017, 15:30

Please do as the video

ICCID Method has been Blocked by Apple. unlock your iphone by R-SIM TMSI mode

R-SIM17 V8.5 AUTO TMSI unlock for iPhone iOS 15.x NO ICCID
https://www.youtube.com/watch?v=Blzb7m-uJAA

3th Home button Emergency Call

4th Call *5005*7672*0#

5th:

Settings SIM Applications

Lock Carrier

Return to TMSI unlock mode. Mobile Operation Flow Method①Ignore WiFi, open cellular data, data roaming, close 4G.
First adjust the card patch operator, insert the card + mobile card, input *5005 * 7672 * 11 # mobile phone will automatically find the mobile 2G signal, then open 4G on the OK method②good card paste. Close 4G, insert the card separately, and automatically jump to the upper-left corner of the activation screen to display 3G or E. Emergency dialing 112 to remain on and back out. Plug in the card and the phone card. Wait for 2G signal to appear, open 4G then. (Switch flight mode if a hollow signal appears during operation)

Methodology③
Switch on the card, insert the mobile card separately, and the phone automatically jumps to the WiFi activation interface. Five signal points and 4G appear in the upper left corner. Turn off the phone immediately (be sure to turn it off thoroughly). Then pull out the card and install the card and the mobile card. Turn it on and wait for the signal.

Method④There are many methods to move 4G, but I wont go through them here.

Unicom 4G operation method
Method①Put the card in place, insert the 4G card separately, appear 5 points plus 4G, emergency dialing 112, hold 112 for 5-8 seconds, switch to 5 points plus 3G, pull out the card directly, plug in the card sticker and the card, automatically send out the signal.

Telecom 4G Operation Method
Method①Adjust the card, dial the *5005*7672*11# code, and then prompt a message to restart the machine.

Methodology②
Switch on the card, plug in the card separately, and the phone automatically jumps to the WiFi activation interface. Five signal points and 4G appear in the upper left corner. Turn off the phone immediately (be sure to turn it off completely). Then pull out the card and install the card and the card. Turn it on and wait for the signal.

Operator Boot Directive *5005*7672*00#
Search signal instruction*5005*7672*11#

Carrier code：
http://www.rsim5.com/bottomlink.php?id=3

retaco82 · 10-05-2017, 16:51

Can u clarify step by step? i have 300 rsims i had left over and need a solution

SIMTester · 10-05-2017, 17:15

It sounds like the solution will tie each phone to one SIM card, but at least there is some solution here. Now to figure out to use TMSI, Unicom, or Telecom solution.

gugbobgug · 10-05-2017, 17:44

any solution ? please make more clear post how to activate i am crazy here
if 4g not work no problem
2g so ok

Rocz.Mx · 10-05-2017, 18:53

Performing your proceed, an error pops-up where it says there's an error to change the address service center. 'No address'.
Keep waiting for a response.

nate.mills9911 · 10-05-2017, 19:02

any solution yet , i have like 200 R sim please update or atleast post a video link

mynos · 10-05-2017, 22:39

not work this method or post Video whith directions! thanks in advance

accesoriosbelmo · 10-05-2017, 23:26

i hear a metoth for activacion with a mac like a VPN, anyone?

**kinglock** · 10-06-2017, 01:46

Return to unlock menu mode

active again . call *5005*7672*00# pop-up menu window on emergency call interface or *5005*7672*imsi(7 numbers)# and

then reset is okay. for example, *5005*7672*4405081# set to softbank carriehgvr .

Araltd · 10-06-2017, 02:20

Does this work with rSim 11+??

yesdomin · 10-06-2017, 03:24

How can i get the imsi ? i got phones for sell all of them with r-sim, i cant sell any one with this problem. HELP

Naymex17 · 10-06-2017, 04:47

No se le entiende nada.

SIMTester · 10-06-2017, 07:48

Quote:

Originally Posted by kinglock

Return to unlock menu mode

active again . call *5005*7672*00# pop-up menu window on emergency call interface or *5005*7672*imsi(7 numbers)# and

then reset is okay. for example, *5005*7672*4405081# set to softbank carriehgvr .

Is this a solution for 2G or just to activate?

imbetow · 10-06-2017, 07:58

Quote:

Originally Posted by yesdomin

How can i get the imsi ? i got phones for sell all of them with r-sim, i cant sell any one with this problem. HELP

You need dial *5005*7672*00#

gugbobgug · 10-06-2017, 08:26

you have to choose gsm 2g option otherwise will not work

10-05-2017, 15:30	#1 (permalink)
kinglock Product Manager Join Date: Mar 2013 Location: CH Posts: 1,483 Member: 1907775 Status: Offline Sonork: 1653265:unlocker Thanks Meter: 2,742	Solutions for "SIM Not supported " 2022 Please do as the video ICCID Method has been Blocked by Apple. unlock your iphone by R-SIM TMSI mode R-SIM17 V8.5 AUTO TMSI unlock for iPhone iOS 15.x NO ICCID https://www.youtube.com/watch?v=Blzb7m-uJAA R-SIM15 ultra AUTO TMSI unlock for iPhone iOS 15.x NO ICCID https://www.youtube.com/watch?v=-RQi8hWn4B0 R-SIM17 AUTO TMSI unlock for iPhone iOS 15.x NO ICCID https://www.youtube.com/watch?v=8XBlpwWb5NE RSIM12 https://www.youtube.com/watch?v=6dqXXFjxLlE https://www.youtube.com/watch?v=F0R-URnMu9Q video1：RSIM11+ Unlock For iOS11 https://www.youtube.com/watch?v=rW_a1Tb1YZI video2： https://www.youtube.com/watch?v=fHg095L240Q video 3: https://www.youtube.com/watch?v=J7mePcuAY2k video 4: https://www.youtube.com/watch?v=cFbL...ture=********* The instructions for RSIM11+ return to unlock menu 3th Home button Emergency Call 4th Call 500576720# 5th: Settings SIM Applications Lock Carrier Return to TMSI unlock mode. Mobile Operation Flow Method①Ignore WiFi, open cellular data, data roaming, close 4G. First adjust the card patch operator, insert the card + mobile card, input 5005 * 7672 * 11 # mobile phone will automatically find the mobile 2G signal, then open 4G on the OK method②good card paste. Close 4G, insert the card separately, and automatically jump to the upper-left corner of the activation screen to display 3G or E. Emergency dialing 112 to remain on and back out. Plug in the card and the phone card. Wait for 2G signal to appear, open 4G then. (Switch flight mode if a hollow signal appears during operation) Methodology③ Switch on the card, insert the mobile card separately, and the phone automatically jumps to the WiFi activation interface. Five signal points and 4G appear in the upper left corner. Turn off the phone immediately (be sure to turn it off thoroughly). Then pull out the card and install the card and the mobile card. Turn it on and wait for the signal. Method④There are many methods to move 4G, but I wont go through them here. Unicom 4G operation method Method①Put the card in place, insert the 4G card separately, appear 5 points plus 4G, emergency dialing 112, hold 112 for 5-8 seconds, switch to 5 points plus 3G, pull out the card directly, plug in the card sticker and the card, automatically send out the signal. Telecom 4G Operation Method Method①Adjust the card, dial the 5005767211# code, and then prompt a message to restart the machine. Methodology② Switch on the card, plug in the card separately, and the phone automatically jumps to the WiFi activation interface. Five signal points and 4G appear in the upper left corner. Turn off the phone immediately (be sure to turn it off completely). Then pull out the card and install the card and the card. Turn it on and wait for the signal. Operator Boot Directive 5005767200# Search signal instruction5005767211# Carrier code： http://www.rsim5.com/bottomlink.php?id=3 Last edited by kinglock; 06-10-2022 at 05:03.*

10-05-2017, 16:51	#2 (permalink)
retaco82 Freak Poster Join Date: Apr 2012 Posts: 112 Member: 1745512 Status: Offline Thanks Meter: 133	HEy Can u clarify step by step? i have 300 rsims i had left over and need a solution

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-05-2017, 17:15	#3 (permalink)
SIMTester No Life Poster Join Date: May 2013 Location: Los Angeles Posts: 1,065 Member: 1938435 Status: Offline Thanks Meter: 208	It sounds like the solution will tie each phone to one SIM card, but at least there is some solution here. Now to figure out to use TMSI, Unicom, or Telecom solution.

10-05-2017, 17:44	#4 (permalink)
gugbobgug Junior Member Join Date: Mar 2015 Location: tbilisi Posts: 27 Member: 2357447 Status: Offline Sonork: dosrun Thanks Meter: 1	any solution ? please make more clear post how to activate i am crazy here if 4g not work no problem 2g so ok

10-05-2017, 18:53	#5 (permalink)
Rocz.Mx Freak Poster Join Date: May 2014 Posts: 137 Member: 2179862 Status: Offline Thanks Meter: 17	Performing your proceed, an error pops-up where it says there's an error to change the address service center. 'No address'. Keep waiting for a response.

10-05-2017, 19:02	#6 (permalink)
nate.mills9911 Junior Member Join Date: Oct 2017 Posts: 2 Member: 2764893 Status: Offline Thanks Meter: 0	any solution yet , i have like 200 R sim please update or atleast post a video link

10-05-2017, 22:39	#7 (permalink)
mynos Freak Poster Join Date: Sep 2011 Location: El Salvador Posts: 123 Member: 1655844 Status: Offline Thanks Meter: 25	not work this method or post Video whith directions! thanks in advance

10-05-2017, 23:26	#8 (permalink)
accesoriosbelmo Junior Member Join Date: Jul 2017 Posts: 7 Member: 2741731 Status: Offline Thanks Meter: 0	i hear a metoth for activacion with a mac like a VPN, anyone?

10-06-2017, 01:46	#9 (permalink)
kinglock Product Manager Join Date: Mar 2013 Location: CH Posts: 1,483 Member: 1907775 Status: Offline Sonork: 1653265:unlocker Thanks Meter: 2,742	Return to unlock menu mode active again . call 5005767200# pop-up menu window on emergency call interface or 50057672imsi(7 numbers)# and then reset is okay. for example, 50057672*4405081# set to softbank carriehgvr .

10-06-2017, 02:20	#10 (permalink)
Araltd Freak Poster Join Date: Feb 2005 Location: At the Shop Posts: 237 Member: 120273 Status: Offline Thanks Meter: 57	Does this work with rSim 11+??

10-06-2017, 03:24	#11 (permalink)
yesdomin Junior Member Join Date: Oct 2017 Posts: 2 Member: 2764990 Status: Offline Thanks Meter: 0	How can i get the imsi ? i got phones for sell all of them with r-sim, i cant sell any one with this problem. HELP

10-06-2017, 04:47	#12 (permalink)
Naymex17 Junior Member Join Date: Apr 2014 Location: MX Posts: 24 Member: 2168645 Status: Offline Thanks Meter: 3	No se le entiende nada.

10-06-2017, 08:26	#15 (permalink)
gugbobgug Junior Member Join Date: Mar 2015 Location: tbilisi Posts: 27 Member: 2357447 Status: Offline Sonork: dosrun Thanks Meter: 1	you have to choose gsm 2g option otherwise will not work