Hello team, always getting error when flashing PAC on this BLU Specific model in spreatrum model, using Upgrade Download software process finish without errors. HEre is my log:
EXE: Avengers Spreadtrum Module 2.0
ACTION: Flash Firmware.
Selected firmware: BLU_C230EQ_V10.0.G.04.10_GENERIC_06-07-2022_1602.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Detected: SPRD U2S Diag (COM20)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:05] Loader ok
[00:00:05] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:06] [1]First boot done.
[00:00:06] Sending second loader.
[00:00:12] Second loader sent ok.
New flash protocol detected.
[00:00:12] Reading: system
Error while read flash(1).
[00:00:32] Reading: super
System name: super
Phone and firmware have same android
[00:00:32] Reading: miscdata
[00:00:32] Reading: w_fixnv1
NVRAM saved to: D:\\spreadtrum_module\flashmode_nvram_backup\_3545 99562724388\_354599562724388_nvram_backup.tar
Phone have super partition.
[00:00:44] Making flash ic repartition.
[00:00:44] Start write: w_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:48] Start write: prodnv
[00:00:48] Format: uboot
[00:00:48] [uboot]Format OK.
[00:00:48] Format: uboot_log
[00:00:48] [uboot_log]Format OK.
[00:00:48] Start write: splloader
[00:00:48] Start write: vbmeta
[00:00:49] Start write: vbmeta_system
[00:00:49] Start write: vbmeta_vendor
[00:00:49] Start write: w_modem
[00:00:54] Start write: w_deltanv
[00:00:55] Start write: w_gdsp
[00:00:58] Start write: pm_sys
[00:00:58] Start write: gpsgl
[00:00:59] Start write: gpsbd
[00:00:59] Start write: wcnmodem
[00:00:59] Start write: boot
[00:01:10] Start write: dtbo
[00:01:12] Start write: recovery
[00:01:25] Start write: super
[emmc_direct]Error write mod: 0000FC08
[1000F800]writing super wrong responce.
[YAFFS_IMG2]Error Write: Super ,aborting.
Error while writing firmware, aborting.