Jazz Digit4G Read Firmware Done By AVB - GSM-Forum

GSM AR · 07-24-2020, 04:43

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.7.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100464A3235 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM8)
[system]Reading info, wait...
Build ID: KOT49H
Display ID: KOT49H release-keys
Version: 4.4.2
Model: Digit4G
Brand: Digit
Device: Digit4G
Manufacturer: alps
Region: US
FRP partition: /dev/block/platform/bootdevice/by-name/frp
Mediatek Version Release: alps-mp-k0.kaios.mp2-V1.6_P13
Modem version: MOLY.LR12A.R3.MP.V62.P7
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: boot_para
Partition: recovery
Partition: para
Partition: expdb
Partition: frp
Partition: nvcfg
Partition: nvdata
Partition: metadata
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: sec1
Partition: proinfo
Partition: md1img
Partition: md1dsp
Partition: spmfw
Partition: mcupmfw
Partition: gz1
Partition: gz2
Partition: nvram
Partition: lk
Partition: lk2
Partition: loader_ext1
Partition: loader_ext2
Partition: boot
Partition: logo
Partition: tee1
Partition: tee2
Partition: system
Partition: cache
Partition: sdcard
Partition: userdata
Partition: flashinfo
Start processing recovery
Start processing protect1.img ......
Reading: BEGIN: 0x7688000 - LEN: 0x800000
Start processing protect2.img ......
Reading: BEGIN: 0x7e88000 - LEN: 0x978000
Start processing proinfo.bin ......
Reading: BEGIN: 0x9200000 - LEN: 0x300000
Start processing md1img
Start processing md1dsp
Start processing spmfw
Start processing mcupmfw
Start processing nvram.bin ......
Reading: BEGIN: 0x10700000 - LEN: 0x500000
Start processing lk
Start processing boot
Start processing logo ......
Start processing trustzone
Start processing system
Reading: BEGIN: 0x14000000 - LEN: 0x40000000
Saved to : C:\Users\GSM AR\Backup\Android_MTK_Backup_Folder\firmware_backu p\MT6739_EMMC_KOT49H__4_4_2_Digit4G_Digit_2020_07_ 24_08_17)
[helio]Wait untill phone will start charging.
[0]All done.

GSM AR · 08-30-2020, 11:10

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.7.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port_V1632 (COM18)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Loading emmi from download
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046355835 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM46)
[system]Reading info, wait...
Build ID: KOT49H
Display ID: Digit_M42421DG_SW15
Version: 4.4.2
Model: Digit4G
Brand: Digit
Device: Digit4G
Manufacturer: alps
Region: US
FRP partition: /dev/block/platform/bootdevice/by-name/frp
Mediatek Version Release: alps-mp-k0.kaios.mp2-V1.6_P19
Modem version: MOLY.LR12A.R3.MP.V62.P8
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: boot_para
Partition: recovery
Partition: para
Partition: expdb
Partition: frp
Partition: nvcfg
Partition: nvdata
Partition: metadata
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: sec1
Partition: proinfo
Partition: md1img
Partition: md1dsp
Partition: spmfw
Partition: mcupmfw
Partition: gz1
Partition: gz2
Partition: nvram
Partition: lk
Partition: lk2
Partition: loader_ext1
Partition: loader_ext2
Partition: boot
Partition: logo
Partition: tee1
Partition: tee2
Partition: system
Partition: cache
Partition: sdcard
Partition: userdata
Partition: flashinfo
Start processing recovery
Start processing protect1.img ......
Reading: BEGIN: 0x7688000 - LEN: 0x800000
Start processing protect2.img ......
Reading: BEGIN: 0x7e88000 - LEN: 0x978000
Start processing proinfo.bin ......
Reading: BEGIN: 0x9200000 - LEN: 0x300000
Start processing md1img
Start processing md1dsp
Start processing spmfw
Start processing mcupmfw
Start processing nvram.bin ......
Reading: BEGIN: 0x10700000 - LEN: 0x500000
Start processing lk
Start processing boot
Start processing logo ......
Start processing trustzone
Start processing system
Reading: BEGIN: 0x14000000 - LEN: 0x40000000
Saved to : C:\Users\GSM AR\Documents\mtk android\Android_MTK_Backup_Folder\firmware_backup\ MT6739_EMMC_KOT49H__4_4_2_Digit4G_Digit_2020_08_29 _15_30)
[helio]Wait untill phone will start charging.
[0]All done.

muddssar · 09-10-2020, 09:56

i need this file give me this file

**orbita** · 09-10-2020, 11:31

You can download firmware from support.
Was uploaded modem downgrade and complete firmware.

07-24-2020, 04:43	#1 (permalink)
GSM AR Registered User Join Date: Aug 2016 Location: Multan Pakistan Posts: 787 Member: 2608490 Status: Offline Thanks Meter: 921	Jazz Digit4G Read Firmware Done By AVB Action : Read Firmware. Selected 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.7.2 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6) Boot mode: Preloader Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 1. Helio MT6739 phone detected, swithing to helio api Helio enabled DRAM in First Da: TRUE Sending loader..... BBCHIP MT6739 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100464A3235 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM8) [system]Reading info, wait... Build ID: KOT49H Display ID: KOT49H release-keys Version: 4.4.2 Model: Digit4G Brand: Digit Device: Digit4G Manufacturer: alps Region: US FRP partition: /dev/block/platform/bootdevice/by-name/frp Mediatek Version Release: alps-mp-k0.kaios.mp2-V1.6_P13 Modem version: MOLY.LR12A.R3.MP.V62.P7 Start dumping flash, this can take up to 1 hour....... Dumping Preloader. Partition: boot_para Partition: recovery Partition: para Partition: expdb Partition: frp Partition: nvcfg Partition: nvdata Partition: metadata Partition: protect1 Partition: protect2 Partition: seccfg Partition: sec1 Partition: proinfo Partition: md1img Partition: md1dsp Partition: spmfw Partition: mcupmfw Partition: gz1 Partition: gz2 Partition: nvram Partition: lk Partition: lk2 Partition: loader_ext1 Partition: loader_ext2 Partition: boot Partition: logo Partition: tee1 Partition: tee2 Partition: system Partition: cache Partition: sdcard Partition: userdata Partition: flashinfo Start processing recovery Start processing protect1.img ...... Reading: BEGIN: 0x7688000 - LEN: 0x800000 Start processing protect2.img ...... Reading: BEGIN: 0x7e88000 - LEN: 0x978000 Start processing proinfo.bin ...... Reading: BEGIN: 0x9200000 - LEN: 0x300000 Start processing md1img Start processing md1dsp Start processing spmfw Start processing mcupmfw Start processing nvram.bin ...... Reading: BEGIN: 0x10700000 - LEN: 0x500000 Start processing lk Start processing boot Start processing logo ...... Start processing trustzone Start processing system Reading: BEGIN: 0x14000000 - LEN: 0x40000000 Saved to : C:\Users\GSM AR\Backup\Android_MTK_Backup_Folder\firmware_backu p\MT6739_EMMC_KOT49H__4_4_2_Digit4G_Digit_2020_07_ 24_08_17) [helio]Wait untill phone will start charging. [0]All done.

08-30-2020, 11:10	#2 (permalink)
GSM AR Registered User Join Date: Aug 2016 Location: Multan Pakistan Posts: 787 Member: 2608490 Status: Offline Thanks Meter: 921	Jazz Digit4G latest SW15 Firmware Dump Done by Avengers Action : Read Firmware. Selected 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.7.2 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port_V1632 (COM18) Boot mode: Brom Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 1. Helio MT6739 phone detected, swithing to helio api Loading emmi from download Helio enabled DRAM in First Da: TRUE Sending loader..... BBCHIP MT6739 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 15010046355835 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM46) [system]Reading info, wait... Build ID: KOT49H Display ID: Digit_M42421DG_SW15 Version: 4.4.2 Model: Digit4G Brand: Digit Device: Digit4G Manufacturer: alps Region: US FRP partition: /dev/block/platform/bootdevice/by-name/frp Mediatek Version Release: alps-mp-k0.kaios.mp2-V1.6_P19 Modem version: MOLY.LR12A.R3.MP.V62.P8 Start dumping flash, this can take up to 1 hour....... Dumping Preloader. Partition: boot_para Partition: recovery Partition: para Partition: expdb Partition: frp Partition: nvcfg Partition: nvdata Partition: metadata Partition: protect1 Partition: protect2 Partition: seccfg Partition: sec1 Partition: proinfo Partition: md1img Partition: md1dsp Partition: spmfw Partition: mcupmfw Partition: gz1 Partition: gz2 Partition: nvram Partition: lk Partition: lk2 Partition: loader_ext1 Partition: loader_ext2 Partition: boot Partition: logo Partition: tee1 Partition: tee2 Partition: system Partition: cache Partition: sdcard Partition: userdata Partition: flashinfo Start processing recovery Start processing protect1.img ...... Reading: BEGIN: 0x7688000 - LEN: 0x800000 Start processing protect2.img ...... Reading: BEGIN: 0x7e88000 - LEN: 0x978000 Start processing proinfo.bin ...... Reading: BEGIN: 0x9200000 - LEN: 0x300000 Start processing md1img Start processing md1dsp Start processing spmfw Start processing mcupmfw Start processing nvram.bin ...... Reading: BEGIN: 0x10700000 - LEN: 0x500000 Start processing lk Start processing boot Start processing logo ...... Start processing trustzone Start processing system Reading: BEGIN: 0x14000000 - LEN: 0x40000000 Saved to : C:\Users\GSM AR\Documents\mtk android\Android_MTK_Backup_Folder\firmware_backup\ MT6739_EMMC_KOT49H__4_4_2_Digit4G_Digit_2020_08_29 _15_30) [helio]Wait untill phone will start charging. [0]All done.

09-10-2020, 09:56	#3 (permalink)
muddssar Freak Poster Join Date: Aug 2015 Location: Pakistan Panjab in Dahranwala Posts: 292 Member: 2441094 Status: Offline Thanks Meter: 69	i need this file i need this file give me this file

09-10-2020, 11:31	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	You can download firmware from support. Was uploaded modem downgrade and complete firmware.